From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/11] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent
Date: Fri, 23 May 2014 21:33:23 +0200 [thread overview]
Message-ID: <17737873.r3cte6TEQ5@phil> (raw)
In-Reply-To: <1621067.VASjIdzoSl@phil>
From: Boris BREZILLON <b.brezillon@overkiz.com>
In case the rate_hw does not implement determine_rate, but only round_rate
we fallback to best_parent selection if mux_hw is present and support
reparenting.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
This also fixes a rate calculation problem when using the standard div and
mux ops, as in this case currently only the mux->determine_rate is used
in the composite rate calculation.
[fixed the output to actually return a rate instead of the diff]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/clk/clk-composite.c | 51 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 57a078e..0a4cd21 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -64,11 +64,59 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *rate_hw = composite->rate_hw;
struct clk_hw *mux_hw = composite->mux_hw;
+ struct clk *parent;
+ unsigned long parent_rate;
+ long tmp_rate, best_rate;
+ unsigned long rate_diff;
+ unsigned long best_rate_diff = ULONG_MAX;
+ int i;
if (rate_hw && rate_ops && rate_ops->determine_rate) {
rate_hw->clk = hw->clk;
return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
best_parent_p);
+ } else if (rate_hw && rate_ops && rate_ops->round_rate &&
+ mux_hw && mux_ops && mux_ops->set_parent) {
+ *best_parent_p = NULL;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
+ *best_parent_p = clk_get_parent(mux_hw->clk);
+ *best_parent_rate = __clk_get_rate(*best_parent_p);
+
+ return rate_ops->round_rate(rate_hw, rate,
+ best_parent_rate);
+ }
+
+ for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
+ parent = clk_get_parent_by_index(mux_hw->clk, i);
+ if (!parent)
+ continue;
+
+ parent_rate = __clk_get_rate(parent);
+
+ tmp_rate = rate_ops->round_rate(rate_hw, rate,
+ &parent_rate);
+ if (tmp_rate < 0)
+ continue;
+
+ if (tmp_rate < rate)
+ rate_diff = rate - tmp_rate;
+ else
+ rate_diff = tmp_rate - rate;
+
+ if (!rate_diff || !*best_parent_p
+ || best_rate_diff > rate_diff) {
+ *best_parent_p = parent;
+ *best_parent_rate = parent_rate;
+ best_rate_diff = rate_diff;
+ best_rate = tmp_rate;
+ }
+
+ if (!rate_diff)
+ return rate;
+ }
+
+ return best_rate;
} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
mux_hw->clk = hw->clk;
return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
@@ -196,7 +244,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
composite->rate_hw = rate_hw;
composite->rate_ops = rate_ops;
clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
- if (rate_ops->determine_rate)
+ if (rate_ops->determine_rate ||
+ (rate_ops->round_rate && clk_composite_ops->set_parent))
clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
--
1.9.0
next prev parent reply other threads:[~2014-05-23 19:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 19:32 [PATCH v3 00/11] Add real clock support for Rockchip's RK3188 Heiko Stübner
2014-05-23 19:33 ` Heiko Stübner [this message]
2014-05-26 9:24 ` [PATCH v3 01/11] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Boris BREZILLON
2014-05-26 10:27 ` Heiko Stübner
2014-05-28 11:07 ` Gabriel Fernandez
2014-05-23 19:34 ` [PATCH v3 02/11] clk: composite: allow read-only clocks Heiko Stübner
2014-05-23 19:34 ` [PATCH v3 03/11] clk: rockchip: add basic infrastructure for clock branches Heiko Stübner
2014-05-23 19:35 ` [PATCH v3 04/11] clk: rockchip: add clock type for pll clocks and pll used on rk3066 Heiko Stübner
2014-05-23 19:36 ` [PATCH v3 05/11] clk: rockchip: add reset controller Heiko Stübner
2014-05-23 19:36 ` [PATCH v3 06/11] dt-bindings: add documentation for rk3188 clock and reset unit Heiko Stübner
2014-05-23 19:37 ` [PATCH v3 07/11] clk: rockchip: add clock driver for rk3188 clocks Heiko Stübner
2014-05-23 19:37 ` [PATCH v3 08/11] ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER Heiko Stübner
2014-05-23 19:38 ` [PATCH v3 09/11] ARM: dts: rk3188: add cru node and update device clocks to use it Heiko Stübner
2014-05-23 19:38 ` [PATCH v3 10/11] ARM: dts: rockchip: move rk3188 core input clocks into main dtsi Heiko Stübner
2014-05-23 19:39 ` [PATCH v3 11/11] ARM: dts: rockchip: remove the now obsolete rk3188-clocks.dtsi Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17737873.r3cte6TEQ5@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).