Re: [PATCH v7 01/13] dt-bindings: phy: Add zx297520v3 USB phy documentation

["Rob Herring (Arm)" <robh@kernel.org>]

On Fri, 17 Jul 2026 00:35:37 +0300, Stefan Dösinger wrote:
> This binding will be used as a subnode of topcrm, which will be added in
> the next patch.
> 
> Why is this a child node and not #phy-cells added to topcrm itself,
> like clocks and resets as writing-bindings.rst suggests? Because
> of_phy_provider_register checks if the of_node the PHY provider is added
> to belongs to the device or is a child of the device, so I can't put the
> PHY driver into an MFD (or AUX) child without its own node.
> 
> Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
> 
> ---
> 
> How do I handle examples? It would be identical to the example in
> topcrm. The example needs the reset defines from the next patch in
> either case.
> ---
>  .../bindings/phy/zte,zx297520v3-usb-phy.yaml       | 96 ++++++++++++++++++++++
>  MAINTAINERS                                        |  2 +
>  include/dt-bindings/phy/phy-zte-zx297520v3-usb.h   | 12 +++
>  3 files changed, 110 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/zte,zx297520v3-usb-phy.example.dtb: /example-0/clock-controller: failed to match any schema with compatible: ['zte,zx297520v3-topcrm', 'syscon']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/zte,zx297520v3-usb-phy.example.dtb: clock-controller (zte,zx297520v3-topcrm): 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260717-zx29clk-v7-1-408411cfcf36@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.