From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Wed, 21 Jan 2015 09:32:38 +0100 Subject: [PATCH v2 0/4] net: stmmac: dwmac-rk: Fix phy regulator issues In-Reply-To: <1421737780-1533-1-git-send-email-romain.perier@gmail.com> References: <1421737780-1533-1-git-send-email-romain.perier@gmail.com> Message-ID: <1791081.FUojULYATz@phil> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Dienstag, 20. Januar 2015, 07:09:36 schrieb Romain Perier: > This series fixes few issues in dwmac-rk: > > 1. Voltage settings was hardcoded into the driver for the phy regulator. > The driver now uses the default voltage settings found in the devicetree, > which are applied throught the regulator framework. > 2. The regulator name used to power on or power off the phy was put in the > devicetree variable "phy_regulator", which is not standard and added a lot > of code for nothing. The driver now uses the devicetree property > "phy-supply" and the corresponding functions to manipulate this regulator. > > The corresponding devicetree files are also updated. As this new binding for > rk3288 has not been released with any official kernel yet (not until 3.20), > I don't need to care about keeping compatibility with the old non standard > property. This series Tested-by: Heiko Stuebner Reviewed-by: Heiko Stuebner @Dave: as said in the v1 mail, this would be nice to have for 3.20