[PATCH 1/5] ARM: dts: set the pinctrl default setting for i2s

Caesar Wang
2015-12-22T09:33:49Z

Sometime will hang if you set the i2s pinctrl as the none setting.
Let's set the pinctrl as the default setting to enable the gpio up/down.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

arch/arm/boot/dts/rk3036.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..8f1bb0f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -579,12 +579,12 @@

i2s {
i2s_bus: i2s-bus {
- rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
- <1 1 RK_FUNC_1 &pcfg_pull_none>,
- <1 2 RK_FUNC_1 &pcfg_pull_none>,
- <1 3 RK_FUNC_1 &pcfg_pull_none>,
- <1 4 RK_FUNC_1 &pcfg_pull_none>,
- <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+ <1 1 RK_FUNC_1 &pcfg_pull_default>,
+ <1 2 RK_FUNC_1 &pcfg_pull_default>,
+ <1 3 RK_FUNC_1 &pcfg_pull_default>,
+ <1 4 RK_FUNC_1 &pcfg_pull_default>,
+ <1 5 RK_FUNC_1 &pcfg_pull_default>;
};
};

--
1.9.1