Re: [PATCH v3 3/7] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1

From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: Roger Quadros <rogerq@kernel.org>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>, <nm@ti.com>,
	<vigneshr@ti.com>, <afd@ti.com>, <kristo@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <u-kumar1@ti.com>,
	<danishanwar@ti.com>, <srk@ti.com>
Subject: Re: [PATCH v3 3/7] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1
Date: Tue, 28 May 2024 18:10:04 +0530	[thread overview]
Message-ID: <17d2bcb8-084d-4b44-871a-28e5750f2636@ti.com> (raw)
In-Reply-To: <db1a0b2d-1bf9-4bd4-98f5-8a38f46d6749@kernel.org>

On Tue, May 28, 2024 at 03:18:25PM +0300, Roger Quadros wrote:

[...]

> > +	dr_mode = "host";
> > +	maximum-speed = "super-speed";
> > +	phys = <&serdes0_usb_link>;
> > +	phy-names = "cdns3,usb3-phy";
> > +};
> > diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > index c75744edb143..61b64fae1bf4 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > @@ -87,3 +87,8 @@ &oc_sram {
> >  	reg = <0x00 0x70000000 0x00 0x40000>;
> >  	ranges = <0x00 0x00 0x70000000 0x40000>;
> >  };
> > +
> > +/* Include bus peripherals that are additionally
> > + * present in J722S
> > + */
> > + #include "k3-j722s-main.dtsi"
> > diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
> 
> The k3-serdes.h changes should be in a separate independent patch.

Ok. Will create a new patch in v4 addressing your comments on patch 5 of
this series to combine Serdes1 changes as well into the same patch.

Regards,
Siddharth.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel