Re: [PATCH v6 0/6] ARM: suniv: USB and two new boards support

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Dne nedelja, 19. marec 2023 ob 22:29:30 CET je Andre Przywara napisal(a):
> Hi,
> 
> This patchset introduces support for F1C100s' USB, and the SourceParts
> PopStick and Lctech Pi boards.
> 
> These are the remaining (DT) patches, all driver and devicetree binding
> patches for USB related devices, which were part of former versions of
> this series, have now been merged (into v6.3-rc1).
> What's left are just the DT bits: for the SoC .dtsi and LicheePi Nano
> board .dts files. On top go patches that add support for two new boards.
> 
> There were no actual changes to the patches, they are merely resend,
> with the vendor and DT board name binding patches combined for the two
> boards.  All prerequisites are in the tree, so the tooling checks pass.
> 
> Cheers,
> Andre
> 
> Changelog v5 ... v6:
> - Drop all driver and USB DT binding patches (already merged separately)
> - based on v6.3-rc2
> 
> Changelog v4 ... v5:
> - Rebase on top to v6.2-rc1
> 
> Changelog v3 ... v4:
> - Dropped the PHY patches, they go via a different tree and need a
>   different base
> - rebased on top of linux-sunxi/sunxi/for-next (provides H616 USB)
> - musb DT binding: use enum
> - musb cleanup: use musb_hdrc_config config pointer directly
> - musb cleanup: use const where possible
> - drop partitions from Popstick DTS file
> - clarify Popstick has a USB type-A *plug*
> - add tags
> 
> Changelog v2 ... v3:
> - remove redundant "Device Tree Bindings" suffix in DT binding doc title
> - add BSD license to binding doc file (as per checkpatch)
> - fix some commit message title prefixes
> - use proper plural spelling for usb0_id_det-gpios
> - popstick.dts: Reorder otg_sram node reference alphabetically
> - popstick.dts: Add regulator- prefix to 3.3V regulator node name
> - popstick.dts: Fix status, compatible and reg property order
> - popstick.dts: Drop unneeded mmc0 and spi0 aliases
> - add patch to clean up sunxi MUSB driver
> - add Acks and Reviewed-by's
> 
> Changelog v1 ... v2:
> - USB PHY binding: clarify the relation with other phy-sun4i-usb bindings
> - Add Popstick binding and .dts patches
> 
> 
> Andre Przywara (1):
>   ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
> 
> Icenowy Zheng (5):
>   ARM: dts: suniv: add USB-related device nodes
>   ARM: dts: suniv: licheepi-nano: enable USB
>   dt-bindings: vendor-prefixes: add Source Parts and Lctech names
>   dt-binding: arm: sunxi: add two board compatible strings
>   ARM: dts: suniv: add device tree for PopStick v1.1
> 
>  .../devicetree/bindings/arm/sunxi.yaml        | 13 +++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  4 +
>  arch/arm/boot/dts/Makefile                    |  4 +-
>  .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 ++++
>  arch/arm/boot/dts/suniv-f1c100s.dtsi          | 32 ++++++++
>  arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 +++++++++++++++++
>  .../boot/dts/suniv-f1c200s-popstick-v1.1.dts  | 81 +++++++++++++++++++
>  7 files changed, 225 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
>  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts

Applied, thanks!

Best regards,
Jernej




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel