[PATCH -next v2] drm/rockchip: Use for_each_child_of_node_scoped()

[PATCH -next v2] drm/rockchip: Use for_each_child_of_node_scoped()

[Jinjie Ruan]

Avoids the need for manual cleanup of_node_put() in early exits
from the loop.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
v2:
- Add Reviewed-by.
- Split out from the PATCH set.
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 9a01aa450741..f5b3f18794dd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -548,7 +548,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
 	struct device_node *remote = NULL;
-	struct device_node  *port, *endpoint;
+	struct device_node  *port;
 	int ret = 0, child_count = 0;
 	const char *name;
 	u32 endpoint_id = 0;
@@ -560,15 +560,13 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 			      "can't found port point, please init lvds panel port!\n");
 		return -EINVAL;
 	}
-	for_each_child_of_node(port, endpoint) {
+	for_each_child_of_node_scoped(port, endpoint) {
 		child_count++;
 		of_property_read_u32(endpoint, "reg", &endpoint_id);
 		ret = drm_of_find_panel_or_bridge(dev->of_node, 1, endpoint_id,
 						  &lvds->panel, &lvds->bridge);
-		if (!ret) {
-			of_node_put(endpoint);
+		if (!ret)
 			break;
-		}
 	}
 	if (!child_count) {
 		DRM_DEV_ERROR(dev, "lvds port does not have any children\n");
-- 
2.34.1

Re: [PATCH -next v2] drm/rockchip: Use for_each_child_of_node_scoped()

[Heiko Stuebner]

Hi,

Am Freitag, 30. August 2024, 09:34:54 CEST schrieb Jinjie Ruan:
> Avoids the need for manual cleanup of_node_put() in early exits
> from the loop.
> 
> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
> v2:
> - Add Reviewed-by.
> - Split out from the PATCH set.

This patch also appears in your series
"[PATCH -next v2 0/3] drm/rockchip: Simplified with for_each_child_of_node_scoped()"
it seems, so I think you could describe why it was split from there now.

Also patch subject "drm/rockchip: lvds: ...."


Thanks
Heiko

> ---
>  drivers/gpu/drm/rockchip/rockchip_lvds.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
> index 9a01aa450741..f5b3f18794dd 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
> @@ -548,7 +548,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
>  	struct drm_encoder *encoder;
>  	struct drm_connector *connector;
>  	struct device_node *remote = NULL;
> -	struct device_node  *port, *endpoint;
> +	struct device_node  *port;
>  	int ret = 0, child_count = 0;
>  	const char *name;
>  	u32 endpoint_id = 0;
> @@ -560,15 +560,13 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
>  			      "can't found port point, please init lvds panel port!\n");
>  		return -EINVAL;
>  	}
> -	for_each_child_of_node(port, endpoint) {
> +	for_each_child_of_node_scoped(port, endpoint) {
>  		child_count++;
>  		of_property_read_u32(endpoint, "reg", &endpoint_id);
>  		ret = drm_of_find_panel_or_bridge(dev->of_node, 1, endpoint_id,
>  						  &lvds->panel, &lvds->bridge);
> -		if (!ret) {
> -			of_node_put(endpoint);
> +		if (!ret)
>  			break;
> -		}
>  	}
>  	if (!child_count) {
>  		DRM_DEV_ERROR(dev, "lvds port does not have any children\n");
>