From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] Samsung watchdog support clean-up
Date: Mon, 03 Jun 2013 14:49:28 +0200 [thread overview]
Message-ID: <1850418.EOBZxN7PB0@amdc1227> (raw)
In-Reply-To: <51A9ADF4.8010102@gmail.com>
Hi Sylwester, Kukjin,
On Saturday 01 of June 2013 10:16:52 Sylwester Nawrocki wrote:
> Hi Tomasz,
>
> On 05/19/2013 12:37 AM, Tomasz Figa wrote:
> > This series is aiming at cleaning up a bit watchdog support on Samsung
> > SoCs. The patches tweak a bit all the watchdog handling code here and
> > there, with the goal of making it DT- and multiplatform-friendly.
> >
> > See particular patches for more detailed descriptions.
> >
> > On S3C6410-based Tiny6410 board (Mini6410-compatible):
> >
> > Tested-by: Tomasz Figa<tomasz.figa@gmail.com>
>
> I've tested this series on a s3c2440 based board. The system restart
> works fine.
>
> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Thank you Sylwester for testing this series.
Kukjin, since it has been already tested on s3c24xx and s3c64xx and nobody
seems to care about s5p64x0 and s5pc100 (although I don't see a reason why
these patches should break them), could we have this series applied?
Best regards,
--
Tomasz Figa
Linux Kernel Developer
Samsung R&D Institute Poland
Samsung Electronics
> > Depends on:
> > - [PATCH] ARM: s5p64x0: Use common uncompress.h part for plat-samsung
> >
> > Tomasz Figa (6):
> > watchdog: s3c2410_wdt: Use local register definitions
> > ARM: SAMSUNG: uncompress: Use local definitions of watchdog registers
> > ARM: SAMSUNG: Add watchdog reset driver
> > ARM: SAMSUNG: Let platforms use the new watchdog reset driver
> > ARM: SAMSUNG: Remove legacy watchdog reset code
> > ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
> >
> > arch/arm/Kconfig | 3 +
> > arch/arm/mach-s3c24xx/Kconfig | 2 +
> > arch/arm/mach-s3c24xx/s3c2410.c | 3 +-
> > arch/arm/mach-s3c24xx/s3c244x.c | 3 +-
> > arch/arm/mach-s3c64xx/common.c | 8 +-
> > arch/arm/mach-s5p64x0/common.c | 4 +-
> > arch/arm/mach-s5pc100/common.c | 3 +-
> > arch/arm/plat-samsung/Kconfig | 6 ++
> > arch/arm/plat-samsung/Makefile | 1 +
> > arch/arm/plat-samsung/include/plat/regs-watchdog.h | 41 ---------
> > arch/arm/plat-samsung/include/plat/uncompress.h | 15 +++-
> > .../arm/plat-samsung/include/plat/watchdog-reset.h | 38 ++-------
> > arch/arm/plat-samsung/watchdog-reset.c | 97
> > ++++++++++++++++++++++ drivers/watchdog/s3c2410_wdt.c
> > | 17 +++-
> > 14 files changed, 156 insertions(+), 85 deletions(-)
> > delete mode 100644 arch/arm/plat-samsung/include/plat/regs-watchdog.h
> > create mode 100644 arch/arm/plat-samsung/watchdog-reset.c>
>
> --
> Regards,
> Sylwester
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-06-03 12:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-18 22:37 [PATCH 0/6] Samsung watchdog support clean-up Tomasz Figa
2013-05-18 22:37 ` [PATCH 1/6] watchdog: s3c2410_wdt: Use local register definitions Tomasz Figa
2013-05-18 22:37 ` [PATCH 2/6] ARM: SAMSUNG: uncompress: Use local definitions of watchdog registers Tomasz Figa
2013-05-18 22:50 ` [PATCH v2 " Tomasz Figa
2013-05-18 22:37 ` [PATCH 3/6] ARM: SAMSUNG: Add watchdog reset driver Tomasz Figa
2013-05-18 22:37 ` [PATCH 4/6] ARM: SAMSUNG: Let platforms use the new " Tomasz Figa
2013-05-18 22:37 ` [PATCH 5/6] ARM: SAMSUNG: Remove legacy watchdog reset code Tomasz Figa
2013-05-18 22:37 ` [PATCH 6/6] ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header Tomasz Figa
2013-06-01 8:16 ` [PATCH 0/6] Samsung watchdog support clean-up Sylwester Nawrocki
2013-06-03 12:49 ` Tomasz Figa [this message]
2013-06-04 9:37 ` Kukjin Kim
2013-06-04 9:45 ` Tomasz Figa
2013-06-10 10:00 ` Kukjin Kim
2013-06-13 19:11 ` Tomasz Figa
2013-06-13 23:22 ` Kukjin Kim
2013-06-13 23:25 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1850418.EOBZxN7PB0@amdc1227 \
--to=t.figa@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox