From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 4/4] Rockchip dts64 changes for 4.17
Date: Thu, 15 Mar 2018 23:22:59 +0100 [thread overview]
Message-ID: <1852590.WiPauY1nNm@phil> (raw)
In-Reply-To: <12470502.BUvxkRrZk8@phil>
The following changes since commit 7928b2cbe55b2a410a0f5c1f154610059c57b1b2:
Linux 4.16-rc1 (2018-02-11 15:04:29 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v4.17-rockchip-dts64-1
for you to fetch changes up to 3783f1eb8a8db3747e753c4aa972124e1309db4e:
arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire (2018-03-13 13:01:03 +0100)
----------------------------------------------------------------
The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well
as a default rate for ACLK_VIO that should be 400MHz according to the TRM.
The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using
that so far.
New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM
+ baseborad from Theobroma Systems and a standalone variant of the Sapphire
board, as a lot of people where using that without the Exkavator baseboard.
Sapphire also saw a lot of small cleanups of things that are not part
of the actual Sapphire board, but the baseboard instead. The rk3399-puma
board got i2s and tsadc support and Gru got its DP node enabled.
----------------------------------------------------------------
Chris Zhong (2):
arm64: dts: rockchip: add cdn-dp node for rk3399.
arm64: dts: rockchip: enable DP for rk3399-gru
Heiko Stuebner (2):
arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
arm64: dts: rockchip: add a standalone version of the rk3399 sapphire
Klaus Goger (7):
arm64: dts: rockchip: enable tsadc on rk3399-puma
arm64: dts: rockchip: add i2s0-2ch-bus pins on rk3399
dt-bindings: add RK3368-uQ7 SoM and EVK base board
arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM
arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM
arm64: dts: rockchip: move i2s0 node from baseboard to SoM on rk3399-puma
arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou
Levin Du (1):
arm64: dts: rockchip: add roc-rk3328-cc board
Robin Murphy (1):
arm64: dts: rockchip: Fix RK3328 UART DMAs
Shawn Lin (1):
arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire
Shunqian Zheng (2):
arm64: dts: rockchip: Add cif test clocks for rk3399
arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399
Vicente Bergas (3):
arm64: dts: rockchip: vdd_log on rk3399-sapphire is not an i2c slave
arm64: dts: rockchip: move rk3399-sapphire i2s2 to daughterboard
arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard
Documentation/devicetree/bindings/arm/rockchip.txt | 12 +
arch/arm64/boot/dts/rockchip/Makefile | 3 +
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 267 +++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +-
.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 146 ++++++++++
arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 317 +++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 13 +-
.../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 71 ++++-
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 28 ++
.../dts/rockchip/rk3399-sapphire-excavator.dts | 44 ++-
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts | 12 +
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 67 +++--
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 79 ++++-
13 files changed, 993 insertions(+), 72 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
next prev parent reply other threads:[~2018-03-15 22:22 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 22:20 [GIT PULL 1/4] Rockchip driver changes for 4.17 Heiko Stuebner
2018-03-15 22:21 ` [GIT PULL 2/4] Rockchip soc32 " Heiko Stuebner
2018-03-15 22:22 ` [GIT PULL 3/4] Rockchip dts32 " Heiko Stuebner
2018-03-15 22:22 ` Heiko Stuebner [this message]
2018-03-27 17:50 ` [GIT PULL 1/4] Rockchip driver " Heiko Stübner
2018-03-28 15:10 ` Arnd Bergmann
2018-03-28 15:08 ` [GIT PULL RESEND 2/4] Rockchip soc32 " Heiko Stuebner
2018-03-28 15:15 ` Arnd Bergmann
2018-03-28 15:09 ` [GIT PULL RESEND 3/4] Rockchip dts32 " Heiko Stuebner
2018-03-28 15:16 ` Arnd Bergmann
2018-03-28 15:09 ` [GIT PULL RESEND 4/4] Rockchip dts64 " Heiko Stuebner
2018-03-28 15:17 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1852590.WiPauY1nNm@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).