From mboxrd@z Thu Jan 1 00:00:00 1970 From: david.lanzendoerfer@o2s.ch (David =?ISO-8859-1?Q?Lanzend=F6rfer?=) Date: Sun, 15 Dec 2013 17:33:57 +0100 Subject: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs In-Reply-To: <52ADBAA3.7060507@redhat.com> References: <1387058295-20641-1-git-send-email-hdegoede@redhat.com> <20131215134415.GE3651@lukather> <52ADBAA3.7060507@redhat.com> Message-ID: <1870422.7CyGeURSCU@dizzy-6.site> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi > David, since you'll be doing v2 I guess you'll be filling in v2. FYI > I've tested this on sun4i-a10, sun5i-a10s sun5i-a13 and sun7i-a20. Yeah. I'll take care of it. I'll work out a V2 which incorporates all the comments made on the first patch set you've handed in. > It uses dma in bus-master mode using a built-in designware idmac controller, > which is identical to the one found in the mmc-dw hosts. Note the rest of > the host is not identical, I've looked into reusing the mmc-dw driver but > that does not seem like a good idea (manual sending stop commands > versus auto stop on sunxi, completely different registers, etc.). It's already a good thing, that I know now what the command set of the IDMAC controller is, since I had no idea how to configure it exactly. > The plan is for David to send v2 of this patch-set so that should take care > of that :) ok -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: