From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: exynos: cpuidle: Move exynos4_idle_driver declaration below in the code
Date: Wed, 24 Jul 2013 10:34:36 +0200 [thread overview]
Message-ID: <1870758.9skEtZxYsB@flatron> (raw)
In-Reply-To: <1374152070-21008-3-git-send-email-daniel.lezcano@linaro.org>
On Thursday 18 of July 2013 14:54:29 Daniel Lezcano wrote:
> In order to prevent a pointless forward declaration, move the driver
> declation after the idle function callback, right before the init
> function.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> arch/arm/mach-exynos/cpuidle.c | 40
> ++++++++++++++++++---------------------- 1 file changed, 18
> insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/cpuidle.c
> b/arch/arm/mach-exynos/cpuidle.c index d8fc1a2..8d06128 100644
> --- a/arch/arm/mach-exynos/cpuidle.c
> +++ b/arch/arm/mach-exynos/cpuidle.c
> @@ -37,28 +37,6 @@
>
> #define S5P_CHECK_AFTR 0xFCBA0D10
>
> -static int exynos4_enter_lowpower(struct cpuidle_device *dev,
> - struct cpuidle_driver *drv,
> - int index);
> -
> -static struct cpuidle_driver exynos4_idle_driver = {
> - .name = "exynos4_idle",
> - .owner = THIS_MODULE,
> - .states = {
> - [0] = ARM_CPUIDLE_WFI_STATE,
> - [1] = {
> - .enter = exynos4_enter_lowpower,
> - .exit_latency = 300,
> - .target_residency = 100000,
> - .flags = CPUIDLE_FLAG_TIME_VALID,
> - .name = "C1",
> - .desc = "ARM power down",
> - },
> - },
> - .state_count = 2,
> - .safe_state_index = 0,
> -};
> -
> /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
> static void exynos4_set_wakeupmask(void)
> {
> @@ -184,6 +162,24 @@ static void __init exynos5_core_down_clk(void)
> __raw_writel(tmp, EXYNOS5_PWR_CTRL2);
> }
>
> +static struct cpuidle_driver exynos4_idle_driver = {
> + .name = "exynos4_idle",
> + .owner = THIS_MODULE,
> + .states = {
> + [0] = ARM_CPUIDLE_WFI_STATE,
> + [1] = {
> + .enter = exynos4_enter_lowpower,
> + .exit_latency = 300,
> + .target_residency = 100000,
> + .flags = CPUIDLE_FLAG_TIME_VALID,
> + .name = "C1",
> + .desc = "ARM power down",
> + },
> + },
> + .state_count = 2,
> + .safe_state_index = 0,
> +};
> +
> static int __init exynos4_init_cpuidle(void)
> {
> if (soc_is_exynos5250())
Makes sense.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
next prev parent reply other threads:[~2013-07-24 8:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 12:54 [PATCH 1/4] ARM: exynos: cpuidle: Fallback to WFI, when AFTR is selected Daniel Lezcano
2013-07-18 12:54 ` [PATCH 2/4] ARM: exynos: cpuidle: Use the common cpuidle register routine Daniel Lezcano
2013-07-19 16:03 ` Bartlomiej Zolnierkiewicz
2013-07-22 4:36 ` Daniel Lezcano
2013-07-22 9:35 ` Bartlomiej Zolnierkiewicz
2013-07-24 8:36 ` Tomasz Figa
2013-07-18 12:54 ` [PATCH 3/4] ARM: exynos: cpuidle: Move exynos4_idle_driver declaration below in the code Daniel Lezcano
2013-07-24 8:34 ` Tomasz Figa [this message]
2013-07-18 12:54 ` [PATCH 4/4] ARM: exynos: cpuidle: Remove useless headers Daniel Lezcano
2013-07-24 8:35 ` Tomasz Figa
2013-07-24 8:32 ` [PATCH 1/4] ARM: exynos: cpuidle: Fallback to WFI, when AFTR is selected Tomasz Figa
2013-07-24 15:16 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1870758.9skEtZxYsB@flatron \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox