From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: porter: add sound support
Date: Thu, 21 Jan 2016 14:36:01 -0800 (PST) [thread overview]
Message-ID: <1872468.4EonQLNEFn@wasted.cogentembedded.com> (raw)
In-Reply-To: <1674850.BZpGW9kEud@wasted.cogentembedded.com>
Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device and the codec.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
This patch is against 'renesas-devel-20160121-v4.4' tag of Simon Horman's
'renesas.git' repo.
arch/arm/boot/dts/r8a7791-porter.dts | 71 +++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ * 3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ */
+
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ x14_clk: x14-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&soundcodec>;
+ simple-audio-card,frame-master = <&soundcodec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ soundcodec: simple-audio-card,codec {
+ sound-dai = <&ak4642>;
+ clocks = <&x14_clk>;
+ };
+ };
};
&extal_clk {
@@ -167,6 +202,16 @@
renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
renesas,function = "du";
};
+
+ ssi_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ audio_clk_pins: audio_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
&scif0 {
@@ -257,6 +302,12 @@
status = "okay";
clock-frequency = <400000>;
+ ak4642: codec at 12 {
+ compatible = "asahi-kasei,ak4642";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
composite-in at 20 {
compatible = "adi,adv7180";
reg = <0x20>;
@@ -385,3 +436,23 @@
};
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>;
+ capture = <&ssi1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
next prev parent reply other threads:[~2016-01-21 22:36 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-08 19:53 [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Sergei Shtylyov
2014-10-08 19:54 ` [PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node Sergei Shtylyov
2014-10-08 19:55 ` [PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB Sergei Shtylyov
2014-10-24 5:09 ` [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Simon Horman
2014-10-24 5:22 ` Yoshihiro Shimoda
2015-09-16 23:53 ` [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support Sergei Shtylyov
2015-10-05 3:02 ` Simon Horman
2015-10-14 19:35 ` [PATCH] ARM: shmobile: porter: " Sergei Shtylyov
2015-10-15 0:18 ` Simon Horman
2015-10-15 10:27 ` Sergei Shtylyov
2015-10-27 21:03 ` [PATCH] ARM: shmobile: porter: add CAN0 " Sergei Shtylyov
2015-10-27 22:41 ` Simon Horman
2015-10-27 22:56 ` Sergei Shtylyov
2015-12-24 22:45 ` [PATCH] ARM: shmobile: porter: add DU " Sergei Shtylyov
2015-12-28 5:29 ` Simon Horman
2015-12-28 14:35 ` Sergei Shtylyov
2015-12-28 21:43 ` Simon Horman
2016-01-12 23:06 ` [PATCH] ARM: shmobile: silk: " Sergei Shtylyov
2016-01-18 1:41 ` Simon Horman
2016-01-21 22:36 ` Sergei Shtylyov [this message]
2016-01-25 0:35 ` [PATCH] ARM: dts: porter: add sound support Kuninori Morimoto
2016-01-26 0:43 ` Simon Horman
2016-01-26 14:31 ` Sergei Shtylyov
2016-01-26 22:14 ` [PATCH] ARM: dts: porter: add MAX3355 support Sergei Shtylyov
2016-01-28 5:49 ` Yoshihiro Shimoda
2016-01-29 20:28 ` Sergei Shtylyov
2016-01-29 20:49 ` Sergei Shtylyov
2016-02-01 11:17 ` Yoshihiro Shimoda
2016-02-01 17:54 ` Sergei Shtylyov
2016-02-01 19:00 ` Sergei Shtylyov
2016-02-15 1:45 ` Simon Horman
2016-02-15 10:59 ` Sergei Shtylyov
2016-02-11 20:26 ` [PATCH] ARM: dts: silk: add sound support Sergei Shtylyov
2016-02-15 4:56 ` Kuninori Morimoto
2016-02-11 21:49 ` [PATCH] ARM: dts: porter: fix JP3 jumper description Sergei Shtylyov
2016-02-15 4:50 ` Kuninori Morimoto
2016-02-15 21:55 ` Simon Horman
2016-02-13 22:26 ` [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node Sergei Shtylyov
2016-02-26 19:43 ` Sergei Shtylyov
2016-03-02 0:47 ` Simon Horman
2016-04-13 19:36 ` [PATCH] ARM: dts: silk: add DU pins Sergei Shtylyov
2016-06-17 20:53 ` Sergei Shtylyov
2016-06-20 8:35 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1872468.4EonQLNEFn@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).