From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Tue, 26 Nov 2013 15:52:54 +0100
Subject: [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform
 Marzen reference support
In-Reply-To: <1385451139-29686-16-git-send-email-horms+renesas@verge.net.au>
References: <1385451139-29686-1-git-send-email-horms+renesas@verge.net.au>
 <1385451139-29686-16-git-send-email-horms+renesas@verge.net.au>
Message-ID: <1902966.4sLBPLdrZF@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Simon,

Thank you for the patch.

On Tuesday 26 November 2013 16:32:17 Simon Horman wrote:
> Now that r8a7779 has CCF support remove the legacy Marzen reference
> Kconfig bits CONFIG_MACH_MARZEN_REFERENCE for the non-multiplatform
> case.
> 
> Starting from this commit Marzen board support is always enabled via
> CONFIG_MACH_MARZEN, and CONFIG_ARCH_MULTIPLATFORM is used to select
> between board-marzen.c and board-marzen-reference.c
> 
> The file board-marzen-reference.c can no longer be used together with
> the legacy sh-clk clock framework, instead CCF is used.

You should then modify it to remove the #ifdef CONFIG_COMMON_CLK conditional 
compilation.

> Based on work for the Koelsch board by Laurent Pinchart.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> ---
> v2
> * Correct changelog to refer to marzen instead of koelsch
> * Do not add typo to Makefile
> ---
>  arch/arm/boot/dts/Makefile           |  1 -
>  arch/arm/mach-shmobile/Kconfig       | 13 -------------
>  arch/arm/mach-shmobile/Makefile      |  1 -
>  arch/arm/mach-shmobile/Makefile.boot |  1 -
>  4 files changed, 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 723fe71..166e3dd 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -205,7 +205,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
>  	r8a7778-bockw-reference.dtb \
>  	r8a7740-armadillo800eva-reference.dtb \
>  	r8a7779-marzen.dtb \
> -	r8a7779-marzen-reference.dtb \
>  	r8a7791-koelsch.dtb \
>  	r8a7791-koelsch-reference.dtb \
>  	r8a7790-lager.dtb \
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 4216baa..a27d60c 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -239,19 +239,6 @@ config MACH_MARZEN
>  	select REGULATOR_FIXED_VOLTAGE if REGULATOR
>  	select USE_OF
> 
> -config MACH_MARZEN_REFERENCE
> -	bool "MARZEN board - Reference Device Tree Implementation"
> -	depends on ARCH_R8A7779
> -	select ARCH_REQUIRE_GPIOLIB
> -	select REGULATOR_FIXED_VOLTAGE if REGULATOR
> -	select USE_OF
> -	---help---
> -	   Use reference implementation of Marzen board support
> -	   which makes use of device tree at the expense
> -	   of not supporting a number of devices.
> -
> -	   This is intended to aid developers
> -
>  config MACH_LAGER
>  	bool "Lager board"
>  	depends on ARCH_R8A7790
> diff --git a/arch/arm/mach-shmobile/Makefile
> b/arch/arm/mach-shmobile/Makefile index 6d75ae8..e7f586c 100644
> --- a/arch/arm/mach-shmobile/Makefile
> +++ b/arch/arm/mach-shmobile/Makefile
> @@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+=
> board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
>  obj-$(CONFIG_MACH_GENMAI_REFERENCE)	+= board-genmai-reference.o
>  obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
> -obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
>  obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
>  obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
>  obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
> diff --git a/arch/arm/mach-shmobile/Makefile.boot
> b/arch/arm/mach-shmobile/Makefile.boot index 759e4f8f..6f761b4 100644
> --- a/arch/arm/mach-shmobile/Makefile.boot
> +++ b/arch/arm/mach-shmobile/Makefile.boot
> @@ -16,7 +16,6 @@ loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
>  loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
>  loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
>  loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
> -loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
> 
>  __ZRELADDR	:= $(sort $(loadaddr-y))
>     zreladdr-y   += $(__ZRELADDR)
-- 
Regards,

Laurent Pinchart