[PATCH 1/2] ARM: s3c64xx: cpuidle: convert to platform driver

[tomasz.figa@gmail.com (Tomasz Figa)]

On Friday 25 of October 2013 21:13:35 Daniel Lezcano wrote:
> On 10/25/2013 12:39 PM, Tomasz Figa wrote:
> > Hi Daniel,
> > 
> > [Sending again, without HTML part. Sorry for the noise.]
> > 
> > On Friday 25 of October 2013 09:11:13 Daniel Lezcano wrote:
> >> The driver is tied with the pm low level code making difficult to
> >> split
> >> the driver into a more arch independent code. The platform driver
> >> allows
> >> to move the standby callback into the platform data field and use a
> >> simple driver with no more dependency on the low level code.
> >> 
> >> The standby callback has a portion of code to set the standby method
> >> and
> >> the effective cpu_do_idle switching the cpu to the right mode. As this
> >> code is redundant in the cpu suspend code, it has been factored out
> >> when
> >> implementing the standby methdod.
> >> 
> >> By this way, the driver is ready to be moved out to the
> >> drivers/cpuidle.
> > 
> > The idea itself is quite good, but unfortunately I have to NAK this.
> > Please see details in comments below.
> > 
> >> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> >> ---
> >> 
> >>   arch/arm/mach-s3c64xx/cpuidle.c |   38
> >> 
> >> ++++++++++++++++---------------------- arch/arm/mach-s3c64xx/pm.c     
> >> |
> >> 
> >>    33 ++++++++++++++++++++++++++------- 2 files changed, 42
> >> 
> >> insertions(+), 29 deletions(-)
> 
> [ ... ]
> 
> >> -
> >> -	tmp = __raw_readl(S3C64XX_PWR_CFG);
> >> -	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
> >> -	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
> > 
> > Finally note the S3C64XX_PWRCFG_CFG_WFI_SLEEP flag here again.
> 
> Ouch ! I missed it. Thanks for spotting the problem.
> 
> > I believe it should be visible now what's wrong with this patch. To
> > make
> > sure it is, let me explain how the system controller of S3C64xx handles
> > WFI requests.
> > 
> > When the CPU issues WFI request to the syscon, it takes an action
> > depending on how it is configured. A bit field is there in one of
> > syscon registers (S3C64XX_PWR_CFG) that selects what action to perform
> > in case of WFI request.
> > 
> > You can program the syscon to ignore the request, enter IDLE mode,
> > enter
> > STOP mode or enter SLEEP mode. As the names suggest, for cpuidle, it
> > needs to be programmed for IDLE mode and for system-wide sleep it
> > needs to be set to SLEEP mode. STOP mode is not very useful as it has
> > mostly the same effect that can be achieved by performing fine-grained
> > clock and power gating of peripherals manually, so it is unused by
> > Linux.
> 
> Yes, this is what I assumed but I missed the CFG_WFI_SLEEP flag, my eyes
> read CFG_WFI_IDLE.
> 
> > Now, my take on the issue you are trying to solve would be a bit
> > different. Since the S3C64xx does not have any interesting cpuidle
> > modes, just a normal, clock-gated WFI mode, it does not need to have a
> > cpuidle driver at all. All that is needed is simply setting up the
> > S3C64XX_PWRCFG_CFG_WFI field to S3C64XX_PWRCFG_CFG_WFI_IDLE early at
> > boot-up, then set it to S3C64XX_PWRCFG_CFG_WFI_SLEEP just before
> > entering the sleep mode and restore it back to
> > S3C64XX_PWRCFG_CFG_WFI_IDLE after waking up.
> So you are suggesting to remove the cpuidle driver ?

Exactly.

> 
> Won't it be worth to add a new WFI_SLEEP state to the cpuidle driver ?

I don't think so. How a suspend-to-RAM specific thing like WFI_SLEEP could 
be relevant to a cpuidle driver? (Unless there are some plans to 
consolidate STR with cpuidle that I haven't heard about...)

Best regards,
Tomasz