From mboxrd@z Thu Jan 1 00:00:00 1970 From: LW@KARO-electronics.de (=?iso-8859-15?Q?Lothar_Wa=DFmann?=) Date: Tue, 14 Sep 2010 09:36:23 +0200 Subject: [PATCH 05/25] drivers/i2c: Use static const char arrays In-Reply-To: <4C8E84A0.1010606@jic23.retrosnub.co.uk> References: <4C8E84A0.1010606@jic23.retrosnub.co.uk> Message-ID: <19599.9719.562406.692216@ipc1.ka-ro> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, Jonathan Cameron writes: > Commit message is somewhat inaccurate... > > On 09/13/10 20:47, Joe Perches wrote: > > Signed-off-by: Joe Perches > > --- > > drivers/i2c/busses/i2c-stu300.c | 4 ++-- > > 1 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c > > index 495be45..2f7c09c 100644 > > --- a/drivers/i2c/busses/i2c-stu300.c > > +++ b/drivers/i2c/busses/i2c-stu300.c > > @@ -871,7 +871,7 @@ stu300_probe(struct platform_device *pdev) > > struct resource *res; > > int bus_nr; > > int ret = 0; > > - char clk_name[] = "I2C0"; > > + char clk_name[sizeof("I2Cx")]; > > > > dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL); > > if (!dev) { > > @@ -881,7 +881,7 @@ stu300_probe(struct platform_device *pdev) > > } > > > > bus_nr = pdev->id; > > - clk_name[3] += (char)bus_nr; > > + sprintf(clk_name, "I2C%c", '0' + bus_nr); > I'm guessing that there are never more than a couple of these. > Why is this method a better bet than just putting %d? > '%c' will only ever produce one byte of output while '%d' may produce up to 11 bytes depending on the value of bus_nr thus overflowing the buffer. Lothar Wa?mann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________