From mboxrd@z Thu Jan 1 00:00:00 1970 From: LW@KARO-electronics.de (=?utf-8?Q?Lothar_Wa=C3=9Fmann?=) Date: Mon, 7 Feb 2011 15:31:04 +0100 Subject: [PATCH 1/5] dmaengine: mxs-dma: add dma support for i.MX23/28 In-Reply-To: <1296871696-21008-2-git-send-email-shawn.guo@freescale.com> References: <1296871696-21008-1-git-send-email-shawn.guo@freescale.com> <1296871696-21008-2-git-send-email-shawn.guo@freescale.com> Message-ID: <19792.552.77000.702221@ipc1.ka-ro> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, Shawn Guo writes: > This patch adds dma support for Freescale MXS-based SoC i.MX23/28, > including apbh-dma and apbx-dma. > > * apbh-dma and apbx-dma are supported in the driver as two instances, > and have to be filtered by dma clients via device id. It becomes > the convention that apbh-dma always gets registered prior to > apbx-dma. > > * apbh-dma is different between mx23 and mx28, hardware version > register is used to handle the differences. > > * Every the mxs dma channel is statically assigned to client device > by soc design with fixed irq. The irq number is being passed by > alloc_chan function with mxs_dma_data, and client driver has to > filter the correct channel by its channel id. > > * mxs-dma supports pio function besides data transfer. The driver > uses dma_data_direction DMA_NONE to identify the pio mode, and > steals sgl and sg_len to get pio words and numbers from clients. > > * mxs dmaengine has some very specific features, like sense function > and the special NAND support (nand_lock, nand_wait4ready). These > are too specific to implemented in generic dmaengine driver. > > * The parameter "flags" of prep functions is currently being used to > pass wait4end flag from clients. > > * The driver refers to imx-sdma and only a single descriptor is > statically assigned to each channel. > > Signed-off-by: Shawn Guo > --- > arch/arm/mach-mxs/include/mach/dma.h | 16 + > drivers/dma/Kconfig | 8 + > drivers/dma/Makefile | 1 + > drivers/dma/mxs-dma.c | 702 ++++++++++++++++++++++++++++++++++ > 4 files changed, 727 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-mxs/include/mach/dma.h > create mode 100644 drivers/dma/mxs-dma.c > > diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h > new file mode 100644 > index 0000000..429f431 > --- /dev/null > +++ b/arch/arm/mach-mxs/include/mach/dma.h > @@ -0,0 +1,16 @@ > +/* > + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#ifndef __MACH_MXS_DMA_H__ > +#define __MACH_MXS_DMA_H__ > + > +struct mxs_dma_data { > + int chan_irq; > +}; > There is a name clash of this structure with the name of a different structure defined in arch/arm/mach-mxs/include/mach/devices-common.h (your patch 3/5): |diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h |index e7aefb4..acd74b4 100644 |--- a/arch/arm/mach-mxs/include/mach/devices-common.h |+++ b/arch/arm/mach-mxs/include/mach/devices-common.h |@@ -40,6 +40,13 @@ struct mxs_auart_data { | struct platform_device *__init mxs_add_auart( | const struct mxs_auart_data *data); | |+/* dma */ |+struct mxs_dma_data { |+ const char *devid; |+ resource_size_t iobase; |+}; |+struct platform_device *__init mxs_add_dma(const struct mxs_dma_data *data); Lothar Wa?mann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________