[Rev2]Samsung: New driver for AC97 controllers

[Rev2]Samsung: New driver for AC97 controllers

[jassisinghbrar at gmail.com]

From: Jassi Brar <jassi.brar@samsung.com>

Hi,
 I am going to submit revised patches for new driver for the AC97-ver-2.0
controllers found in Samsung SoCs. The driver is named generic s3c-ac97.c
 The driver has been tested for on s3c64xx and newer SoCs and is confirmed
to support Playback/Capture and VRA.

 A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
been added. The driver is generic enough to be used as such with newer SoCs.

 The controller driver patch is meant for Mark Brown's for-2.6.34
 Other patches apply cleanly against the Ben Dooks' next-samsung

 Last few patches move smd2443 and ln2440sbc ac97 drivers to use new s3c-ac97.c
and at last the s3c2443-ac97.c is removed.

Regards.

[Rev2]Samsung: New driver for AC97 controllers

[Mark Brown]

On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:

>  I am going to submit revised patches for new driver for the AC97-ver-2.0
> controllers found in Samsung SoCs. The driver is named generic s3c-ac97.c
>  The driver has been tested for on s3c64xx and newer SoCs and is confirmed
> to support Playback/Capture and VRA.

The ASoC bits of this all look good, I'll do some testing before I apply
them though (probably later today) since I have relevant hardware on my
desk.

[Rev2]Samsung: New driver for AC97 controllers

[Mark Brown]

On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:

>  A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
> been added. The driver is generic enough to be used as such with newer SoCs.

OK, works for me with a smoke test so I've applied all the sound/soc
parts.  I'll add a commit detailing the CFG jumper settings expected to
make it work out of the box on SMDK6410 since that catches quite a few
people out.

[Rev2]Samsung: New driver for AC97 controllers

[jassi brar]

On Thu, Jan 28, 2010 at 5:45 AM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:
>
>> ?A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
>> been added. The driver is generic enough to be used as such with newer SoCs.
>
> OK, works for me with a smoke test so I've applied all the sound/soc
> parts. ?I'll add a commit detailing the CFG jumper settings expected to
> make it work out of the box on SMDK6410 since that catches quite a few
> people out.
Thanks.