From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
Date: Tue, 12 Feb 2013 09:48:42 -0800 [thread overview]
Message-ID: <1d4a01ce0949$343c4230$9cb4c690$@samsung.com> (raw)
In-Reply-To: 201302080057.00664.heiko@sntech.de
Kukjin Kim wrote:
>
> Heiko St?bner wrote:
> >
> > The register definitions are only used in the driver itself.
> > This also removes the last dependency on plat/ includes from the i2c
> > driver.
> >
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > ---
> > arch/arm/mach-s3c24xx/mach-rx1950.c | 1 -
> > arch/arm/plat-samsung/devs.c | 1 -
> > arch/arm/plat-samsung/include/plat/regs-iic.h | 56 -------------------------
> > drivers/i2c/busses/i2c-s3c2410.c | 41 ++++++++++++++++++-
> > 4 files changed, 40 insertions(+), 59 deletions(-) delete mode
> > 100644 arch/arm/plat-samsung/include/plat/regs-iic.h
> >
> > diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-
> > s3c24xx/mach-rx1950.c index 799af43..64b52a9 100644
> > --- a/arch/arm/mach-s3c24xx/mach-rx1950.c
> > +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
> > @@ -56,7 +56,6 @@
> > #include <plat/cpu.h>
> > #include <plat/devs.h>
> > #include <plat/pm.h>
> > -#include <plat/regs-iic.h>
> > #include <plat/regs-serial.h>
> > #include <plat/samsung-time.h>
> >
> > diff --git a/arch/arm/plat-samsung/devs.c
> > b/arch/arm/plat-samsung/devs.c index e1124d9..6317a9e 100644
> > --- a/arch/arm/plat-samsung/devs.c
> > +++ b/arch/arm/plat-samsung/devs.c
> > @@ -62,7 +62,6 @@
> > #include <linux/platform_data/usb-s3c2410_udc.h>
> > #include <linux/platform_data/usb-ohci-s3c2410.h>
> > #include <plat/usb-phy.h>
> > -#include <plat/regs-iic.h>
> > #include <plat/regs-serial.h>
> > #include <plat/regs-spi.h>
> > #include <linux/platform_data/spi-s3c64xx.h>
> > diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h
> > b/arch/arm/plat- samsung/include/plat/regs-iic.h deleted file mode
> > 100644 index 2f7c17d..0000000
> > --- a/arch/arm/plat-samsung/include/plat/regs-iic.h
> > +++ /dev/null
> > @@ -1,56 +0,0 @@
> > -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
> > - *
> > - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
> > - * http://www.simtec.co.uk/products/SWLINUX/
> > - *
> > - * This program is free software; you can redistribute it and/or
> > modify
> > - * it under the terms of the GNU General Public License version 2 as
> > - * published by the Free Software Foundation.
> > - *
> > - * S3C2410 I2C Controller
> > -*/
> > -
> > -#ifndef __ASM_ARCH_REGS_IIC_H
> > -#define __ASM_ARCH_REGS_IIC_H __FILE__
> > -
> > -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
> > -
> > -#define S3C2410_IICREG(x) (x)
> > -
> > -#define S3C2410_IICCON S3C2410_IICREG(0x00)
> > -#define S3C2410_IICSTAT S3C2410_IICREG(0x04)
> > -#define S3C2410_IICADD S3C2410_IICREG(0x08)
> > -#define S3C2410_IICDS S3C2410_IICREG(0x0C)
> > -#define S3C2440_IICLC S3C2410_IICREG(0x10)
> > -
> > -#define S3C2410_IICCON_ACKEN (1<<7)
> > -#define S3C2410_IICCON_TXDIV_16 (0<<6)
> > -#define S3C2410_IICCON_TXDIV_512 (1<<6)
> > -#define S3C2410_IICCON_IRQEN (1<<5)
> > -#define S3C2410_IICCON_IRQPEND (1<<4)
> > -#define S3C2410_IICCON_SCALE(x) ((x)&15)
> > -#define S3C2410_IICCON_SCALEMASK (0xf)
> > -
> > -#define S3C2410_IICSTAT_MASTER_RX (2<<6)
> > -#define S3C2410_IICSTAT_MASTER_TX (3<<6)
> > -#define S3C2410_IICSTAT_SLAVE_RX (0<<6)
> > -#define S3C2410_IICSTAT_SLAVE_TX (1<<6)
> > -#define S3C2410_IICSTAT_MODEMASK (3<<6)
> > -
> > -#define S3C2410_IICSTAT_START (1<<5)
> > -#define S3C2410_IICSTAT_BUSBUSY (1<<5)
> > -#define S3C2410_IICSTAT_TXRXEN (1<<4)
> > -#define S3C2410_IICSTAT_ARBITR (1<<3)
> > -#define S3C2410_IICSTAT_ASSLAVE (1<<2)
> > -#define S3C2410_IICSTAT_ADDR0 (1<<1)
> > -#define S3C2410_IICSTAT_LASTBIT (1<<0)
> > -
> > -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
> > -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
> > -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
> > -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
> > -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
> > -
> > -#define S3C2410_IICLC_FILTER_ON (1<<2)
> > -
> > -#endif /* __ASM_ARCH_REGS_IIC_H */
> > diff --git a/drivers/i2c/busses/i2c-s3c2410.c
> > b/drivers/i2c/busses/i2c- s3c2410.c index a290d08..5cc4f71 100644
> > --- a/drivers/i2c/busses/i2c-s3c2410.c
> > +++ b/drivers/i2c/busses/i2c-s3c2410.c
> > @@ -42,9 +42,48 @@
> >
> > #include <asm/irq.h>
> >
> > -#include <plat/regs-iic.h>
> > #include <linux/platform_data/i2c-s3c2410.h>
> >
> > +/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
> > +
> > +#define S3C2410_IICREG(x) (x)
> > +
> > +#define S3C2410_IICCON S3C2410_IICREG(0x00)
> > +#define S3C2410_IICSTAT S3C2410_IICREG(0x04)
> > +#define S3C2410_IICADD S3C2410_IICREG(0x08)
> > +#define S3C2410_IICDS S3C2410_IICREG(0x0C)
> > +#define S3C2440_IICLC S3C2410_IICREG(0x10)
> > +
> > +#define S3C2410_IICCON_ACKEN (1<<7)
> > +#define S3C2410_IICCON_TXDIV_16 (0<<6)
> > +#define S3C2410_IICCON_TXDIV_512 (1<<6)
> > +#define S3C2410_IICCON_IRQEN (1<<5)
> > +#define S3C2410_IICCON_IRQPEND (1<<4)
> > +#define S3C2410_IICCON_SCALE(x) ((x)&15)
> > +#define S3C2410_IICCON_SCALEMASK (0xf)
> > +
> > +#define S3C2410_IICSTAT_MASTER_RX (2<<6)
> > +#define S3C2410_IICSTAT_MASTER_TX (3<<6)
> > +#define S3C2410_IICSTAT_SLAVE_RX (0<<6)
> > +#define S3C2410_IICSTAT_SLAVE_TX (1<<6)
> > +#define S3C2410_IICSTAT_MODEMASK (3<<6)
> > +
> > +#define S3C2410_IICSTAT_START (1<<5)
> > +#define S3C2410_IICSTAT_BUSBUSY (1<<5)
> > +#define S3C2410_IICSTAT_TXRXEN (1<<4)
> > +#define S3C2410_IICSTAT_ARBITR (1<<3)
> > +#define S3C2410_IICSTAT_ASSLAVE (1<<2)
> > +#define S3C2410_IICSTAT_ADDR0 (1<<1)
> > +#define S3C2410_IICSTAT_LASTBIT (1<<0)
> > +
> > +#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
> > +#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
> > +#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
> > +#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
> > +#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
> > +
> > +#define S3C2410_IICLC_FILTER_ON (1<<2)
> > +
> > /* Treat S3C2410 as baseline hardware, anything else is supported via
> > quirks */
> > #define QUIRK_S3C2440 (1 << 0)
> > #define QUIRK_HDMIPHY (1 << 1)
> > --
> > 1.7.2.3
>
> Looks good to me on this series:
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>
> Hi Wolfram, if you're ok on this, please pick up into your tree with my ack.
>
Re-sending due to changing of Wolfram's e-mail address.
Thanks.
- Kukjin
next prev parent reply other threads:[~2013-02-12 17:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 23:57 [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver Heiko Stübner
2013-02-07 23:57 ` [PATCH 2/2] i2c: s3c2410: fixup the styling of the newly moved register definitions Heiko Stübner
2013-02-12 17:41 ` [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver Kukjin Kim
2013-02-15 20:00 ` Wolfram Sang
2013-02-12 17:48 ` Kukjin Kim [this message]
2013-03-21 9:57 ` Wolfram Sang
2013-03-21 10:51 ` Heiko Stübner
2013-03-21 10:59 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='1d4a01ce0949$343c4230$9cb4c690$@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox