From mboxrd@z Thu Jan  1 00:00:00 1970
From: xypron.glpk@gmx.de (Heinrich Schuchardt)
Date: Mon, 4 Jun 2018 23:45:18 +0200
Subject: [PATCH 1/1] arm64: dts: rockchip: correct voltage selector
 Firefly-RK3399
In-Reply-To: <20180604171523.28454-1-xypron.glpk@gmx.de>
References: <20180604171523.28454-1-xypron.glpk@gmx.de>
Message-ID: <1d5c4a57-c89c-07e9-e4ad-1bda2247e2be@gmx.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 06/04/2018 07:15 PM, Heinrich Schuchardt wrote:
> Without this patch the Firefly-RK3399 board boot process hangs after these
> lines:
> 
>    fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
>    fan53555-reg: supplied by vcc_sys
>    vcc1v8_s3: supplied by vcc_1v8
> 
> Blacklisting driver fan53555 allows booting.
> 
> The device tree uses a value of fcs,suspend-voltage-selector different to
> any other board.
> 
> Changing this setting to the usual value is sufficient to enable booting.
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
> index 4f28628aa091..50940ef844a7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
> @@ -458,7 +458,7 @@
>  	vdd_cpu_b: regulator at 40 {
>  		compatible = "silergy,syr827";
>  		reg = <0x40>;
> -		fcs,suspend-voltage-selector = <0>;
> +		fcs,suspend-voltage-selector = <1>;

The same value <1> is used in the legacy kernel:

https://github.com/rockchip-linux/kernel/blob/release-4.4/arch/arm64/boot/dts/rockchip/rk3399-firefly-linux.dts

	vdd_cpu_b: syr827 at 40 {
		compatible = "silergy,syr827";
		reg = <0x40>;
		vin-supply = <&vcc5v0_sys>;
		regulator-compatible = "fan53555-reg";
		regulator-name = "vdd_cpu_b";
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1500000>;
		regulator-ramp-delay = <1000>;
		vsel-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
		fcs,suspend-voltage-selector = <1>;
		regulator-always-on;
		regulator-boot-on;
		regulator-initial-state = <3>;
			regulator-state-mem {
			regulator-off-in-suspend;
		};
};

Best regards

Heinrich


>  		regulator-name = "vdd_cpu_b";
>  		regulator-min-microvolt = <712500>;
>  		regulator-max-microvolt = <1500000>;
>