From mboxrd@z Thu Jan 1 00:00:00 1970 From: marek.vasut@gmail.com (Marek Vasut) Date: Sat, 24 Feb 2018 11:05:49 +0100 Subject: [PATCH] ARM: dts: porter: Add missing PMIC nodes In-Reply-To: <20180223164517.aboazzeuujgtkh7q@verge.net.au> References: <20180217020756.21474-1-marek.vasut+renesas@gmail.com> <20180223164517.aboazzeuujgtkh7q@verge.net.au> Message-ID: <1d93db7c-e65a-e2b3-5a65-a1eb4fa1d60e@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/23/2018 05:45 PM, Simon Horman wrote: > On Sun, Feb 18, 2018 at 04:07:51PM +0100, Geert Uytterhoeven wrote: >> Hi Marek, >> >> CC Steve Twiss >> >> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut wrote: >>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is >>> one DA9063 and one DA9210 on Porter, the only difference from >>> the other boards is that DA9063 is at I2C address 0x5a rather >>> than 0x58 . >>> >>> Signed-off-by: Marek Vasut >> >> Thanks for your patch! >> >>> --- a/arch/arm/boot/dts/r8a7791-porter.dts >>> +++ b/arch/arm/boot/dts/r8a7791-porter.dts >>> @@ -354,10 +354,47 @@ >>> clock-frequency = <400000>; >>> }; >>> >>> +&i2c6 { >>> + status = "okay"; >>> + clock-frequency = <100000>; >>> + >>> + pmic at 5a { >>> + compatible = "dlg,da9063"; >> >> Does it matter that this is a DA9063L ("Variant 6B")? >> Do we need a new compatible value, or can this be detected at runtime? > > Hi Marek, > > could you follow up on this? Yes, ASAP, once I'm back in the office, currently I'm stuck at the airport. -- Best regards, Marek Vasut