From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 02/11] opp: Relocate few routines
Date: Mon, 27 Jul 2015 10:32:32 +0530 [thread overview]
Message-ID: <1f43ce4bd97433c41d379daac005d71cf771d15a.1437972635.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1437972635.git.viresh.kumar@linaro.org>
In order to prepare for the later commits, this relocates few routines
towards the top as they will be used earlier in the code.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/base/power/opp.c | 277 ++++++++++++++++++++++++-----------------------
1 file changed, 139 insertions(+), 138 deletions(-)
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 677fb2843553..8c3fd57975fb 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -438,6 +438,102 @@ static struct device_opp *_add_device_opp(struct device *dev)
}
/**
+ * _kfree_device_rcu() - Free device_opp RCU handler
+ * @head: RCU head
+ */
+static void _kfree_device_rcu(struct rcu_head *head)
+{
+ struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head);
+
+ kfree_rcu(device_opp, rcu_head);
+}
+
+/**
+ * _kfree_opp_rcu() - Free OPP RCU handler
+ * @head: RCU head
+ */
+static void _kfree_opp_rcu(struct rcu_head *head)
+{
+ struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head);
+
+ kfree_rcu(opp, rcu_head);
+}
+
+/**
+ * _opp_remove() - Remove an OPP from a table definition
+ * @dev_opp: points back to the device_opp struct this opp belongs to
+ * @opp: pointer to the OPP to remove
+ *
+ * This function removes an opp definition from the opp list.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * It is assumed that the caller holds required mutex for an RCU updater
+ * strategy.
+ */
+static void _opp_remove(struct device_opp *dev_opp,
+ struct dev_pm_opp *opp)
+{
+ /*
+ * Notify the changes in the availability of the operable
+ * frequency/voltage list.
+ */
+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+ list_del_rcu(&opp->node);
+ call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
+
+ if (list_empty(&dev_opp->opp_list)) {
+ list_del_rcu(&dev_opp->node);
+ call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head,
+ _kfree_device_rcu);
+ }
+}
+
+/**
+ * dev_pm_opp_remove() - Remove an OPP from OPP list
+ * @dev: device for which we do this operation
+ * @freq: OPP to remove with matching 'freq'
+ *
+ * This function removes an opp from the opp list.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_remove(struct device *dev, unsigned long freq)
+{
+ struct dev_pm_opp *opp;
+ struct device_opp *dev_opp;
+ bool found = false;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ dev_opp = _find_device_opp(dev);
+ if (IS_ERR(dev_opp))
+ goto unlock;
+
+ list_for_each_entry(opp, &dev_opp->opp_list, node) {
+ if (opp->rate == freq) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n",
+ __func__, freq);
+ goto unlock;
+ }
+
+ _opp_remove(dev_opp, opp);
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
+
+/**
* _opp_add_dynamic() - Allocate a dynamic OPP.
* @dev: device for which we do this operation
* @freq: Frequency in Hz for this OPP
@@ -570,102 +666,6 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
EXPORT_SYMBOL_GPL(dev_pm_opp_add);
/**
- * _kfree_opp_rcu() - Free OPP RCU handler
- * @head: RCU head
- */
-static void _kfree_opp_rcu(struct rcu_head *head)
-{
- struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head);
-
- kfree_rcu(opp, rcu_head);
-}
-
-/**
- * _kfree_device_rcu() - Free device_opp RCU handler
- * @head: RCU head
- */
-static void _kfree_device_rcu(struct rcu_head *head)
-{
- struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head);
-
- kfree_rcu(device_opp, rcu_head);
-}
-
-/**
- * _opp_remove() - Remove an OPP from a table definition
- * @dev_opp: points back to the device_opp struct this opp belongs to
- * @opp: pointer to the OPP to remove
- *
- * This function removes an opp definition from the opp list.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * It is assumed that the caller holds required mutex for an RCU updater
- * strategy.
- */
-static void _opp_remove(struct device_opp *dev_opp,
- struct dev_pm_opp *opp)
-{
- /*
- * Notify the changes in the availability of the operable
- * frequency/voltage list.
- */
- srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
- list_del_rcu(&opp->node);
- call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
-
- if (list_empty(&dev_opp->opp_list)) {
- list_del_rcu(&dev_opp->node);
- call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head,
- _kfree_device_rcu);
- }
-}
-
-/**
- * dev_pm_opp_remove() - Remove an OPP from OPP list
- * @dev: device for which we do this operation
- * @freq: OPP to remove with matching 'freq'
- *
- * This function removes an opp from the opp list.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-void dev_pm_opp_remove(struct device *dev, unsigned long freq)
-{
- struct dev_pm_opp *opp;
- struct device_opp *dev_opp;
- bool found = false;
-
- /* Hold our list modification lock here */
- mutex_lock(&dev_opp_list_lock);
-
- dev_opp = _find_device_opp(dev);
- if (IS_ERR(dev_opp))
- goto unlock;
-
- list_for_each_entry(opp, &dev_opp->opp_list, node) {
- if (opp->rate == freq) {
- found = true;
- break;
- }
- }
-
- if (!found) {
- dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n",
- __func__, freq);
- goto unlock;
- }
-
- _opp_remove(dev_opp, opp);
-unlock:
- mutex_unlock(&dev_opp_list_lock);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
-
-/**
* _opp_set_availability() - helper to set the availability of an opp
* @dev: device for which we do this operation
* @freq: OPP frequency to modify availability
@@ -825,6 +825,49 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
#ifdef CONFIG_OF
/**
+ * of_free_opp_table() - Free OPP table entries created from static DT entries
+ * @dev: device pointer used to lookup device OPPs.
+ *
+ * Free OPPs created using static entries present in DT.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void of_free_opp_table(struct device *dev)
+{
+ struct device_opp *dev_opp;
+ struct dev_pm_opp *opp, *tmp;
+
+ /* Check for existing list for 'dev' */
+ dev_opp = _find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ int error = PTR_ERR(dev_opp);
+
+ if (error != -ENODEV)
+ WARN(1, "%s: dev_opp: %d\n",
+ IS_ERR_OR_NULL(dev) ?
+ "Invalid device" : dev_name(dev),
+ error);
+ return;
+ }
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Free static OPPs */
+ list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) {
+ if (!opp->dynamic)
+ _opp_remove(dev_opp, opp);
+ }
+
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(of_free_opp_table);
+
+/**
* of_init_opp_table() - Initialize opp table from device tree
* @dev: device pointer used to lookup device OPPs.
*
@@ -882,46 +925,4 @@ int of_init_opp_table(struct device *dev)
return 0;
}
EXPORT_SYMBOL_GPL(of_init_opp_table);
-
-/**
- * of_free_opp_table() - Free OPP table entries created from static DT entries
- * @dev: device pointer used to lookup device OPPs.
- *
- * Free OPPs created using static entries present in DT.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * Hence this function indirectly uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- */
-void of_free_opp_table(struct device *dev)
-{
- struct device_opp *dev_opp;
- struct dev_pm_opp *opp, *tmp;
-
- /* Check for existing list for 'dev' */
- dev_opp = _find_device_opp(dev);
- if (IS_ERR(dev_opp)) {
- int error = PTR_ERR(dev_opp);
- if (error != -ENODEV)
- WARN(1, "%s: dev_opp: %d\n",
- IS_ERR_OR_NULL(dev) ?
- "Invalid device" : dev_name(dev),
- error);
- return;
- }
-
- /* Hold our list modification lock here */
- mutex_lock(&dev_opp_list_lock);
-
- /* Free static OPPs */
- list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) {
- if (!opp->dynamic)
- _opp_remove(dev_opp, opp);
- }
-
- mutex_unlock(&dev_opp_list_lock);
-}
-EXPORT_SYMBOL_GPL(of_free_opp_table);
#endif
--
2.4.0
next prev parent reply other threads:[~2015-07-27 5:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-27 5:02 [PATCH V2 00/11] OPP: Add code to support operating-points-v2 bindings Viresh Kumar
2015-07-27 5:02 ` [PATCH V2 01/11] opp: Create a directory for opp bindings Viresh Kumar
2015-07-27 5:02 ` Viresh Kumar [this message]
2015-07-27 5:02 ` [PATCH V2 03/11] OPP: Create _remove_device_opp() for freeing dev_opp Viresh Kumar
2015-07-27 5:02 ` [PATCH V2 04/11] OPP: Allocate dev_opp from _add_device_opp() Viresh Kumar
2015-07-27 5:02 ` [PATCH V2 05/11] OPP: Break _opp_add_dynamic() into smaller functions Viresh Kumar
2015-07-27 5:02 ` [PATCH V2 06/11] opp: Add support to parse "operating-points-v2" bindings Viresh Kumar
2015-07-27 14:23 ` Bartlomiej Zolnierkiewicz
2015-07-27 5:02 ` [PATCH V2 07/11] OPP: Add clock-latency-ns support Viresh Kumar
2015-07-27 14:27 ` Bartlomiej Zolnierkiewicz
2015-07-27 5:02 ` [PATCH V2 08/11] opp: Add OPP sharing information to OPP library Viresh Kumar
2015-07-27 14:48 ` Bartlomiej Zolnierkiewicz
2015-07-28 2:11 ` Viresh Kumar
2015-07-27 5:02 ` [PATCH V2 09/11] OPP: Add support for opp-suspend Viresh Kumar
2015-07-27 14:50 ` Bartlomiej Zolnierkiewicz
2015-07-27 5:02 ` [PATCH V2 10/11] opp: Add helpers for initializing CPU OPPs Viresh Kumar
2015-07-27 16:37 ` Bartlomiej Zolnierkiewicz
2015-07-27 5:02 ` [PATCH V2 11/11] cpufreq-dt: Add support for operating-points-v2 bindings Viresh Kumar
2015-07-27 16:50 ` Bartlomiej Zolnierkiewicz
2015-07-27 13:39 ` [PATCH V2 00/11] OPP: Add code to support " Rafael J. Wysocki
2015-07-27 14:34 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1f43ce4bd97433c41d379daac005d71cf771d15a.1437972635.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).