From: Jerome Brunet <jbrunet@baylibre.com>
To: Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Xianwei Zhao <xianwei.zhao@amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
jian.hu@amlogic.com, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver
Date: Thu, 14 May 2026 18:27:42 +0200 [thread overview]
Message-ID: <1j33zu6jnl.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20260511-b4-a9_clk-v1-10-41cb4071b7c9@amlogic.com> (Jian Hu via's message of "Mon, 11 May 2026 20:47:32 +0800")
On lun. 11 mai 2026 at 20:47, Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com@kernel.org> wrote:
> From: Jian Hu <jian.hu@amlogic.com>
>
> Add the Always-on clock controller driver for the Amlogic A9 SoC family.
>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---
> drivers/clk/meson/Makefile | 2 +-
> drivers/clk/meson/a9-aoclk.c | 494 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 495 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 2b5b67b14efc..91af609ce815 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -20,7 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
> obj-$(CONFIG_COMMON_CLK_A9_PLL) += a9-pll.o
> -obj-$(CONFIG_COMMON_CLK_A9_PERIPHERALS) += a9-peripherals.o
> +obj-$(CONFIG_COMMON_CLK_A9_PERIPHERALS) += a9-peripherals.o a9-aoclk.o
> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
> obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> diff --git a/drivers/clk/meson/a9-aoclk.c b/drivers/clk/meson/a9-aoclk.c
> new file mode 100644
> index 000000000000..3c42eaf585d2
> --- /dev/null
> +++ b/drivers/clk/meson/a9-aoclk.c
> @@ -0,0 +1,494 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright (C) 2026 Amlogic, Inc. All rights reserved
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/amlogic,a9-aoclkc.h>
> +#include "clk-regmap.h"
> +#include "clk-dualdiv.h"
> +#include "meson-clkc-utils.h"
> +
> +#define AO_OSCIN_CTRL 0x00
> +#define AO_SYS_CLK0 0x04
> +#define AO_PWM_CLK_A_CTRL 0x1c
> +#define AO_PWM_CLK_B_CTRL 0x20
> +#define AO_PWM_CLK_C_CTRL 0x24
> +#define AO_PWM_CLK_D_CTRL 0x28
> +#define AO_PWM_CLK_E_CTRL 0x2c
> +#define AO_PWM_CLK_F_CTRL 0x30
> +#define AO_PWM_CLK_G_CTRL 0x34
> +#define AO_CEC_CTRL0 0x38
> +#define AO_CEC_CTRL1 0x3c
> +#define AO_RTC_BY_OSCIN_CTRL0 0x50
> +#define AO_RTC_BY_OSCIN_CTRL1 0x54
> +
> +#define A9_COMP_SEL(_name, _reg, _shift, _mask, _pdata) \
> + MESON_COMP_SEL(a9_, _name, _reg, _shift, _mask, _pdata, NULL, 0, 0)
a9_ao_ ?
> +
> +#define A9_COMP_DIV(_name, _reg, _shift, _width) \
> + MESON_COMP_DIV(a9_, _name, _reg, _shift, _width, 0, CLK_SET_RATE_PARENT)
> +
> +#define A9_COMP_GATE(_name, _reg, _bit) \
> + MESON_COMP_GATE(a9_, _name, _reg, _bit, CLK_SET_RATE_PARENT)
> +
> +static struct clk_regmap a9_ao_xtal_in = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = AO_OSCIN_CTRL,
> + .bit_idx = 3,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "ao_xtal_in",
> + .ops = &clk_regmap_gate_ops,
> + .parent_data = &(const struct clk_parent_data) {
> + .fw_name = "xtal",
> + },
> + .num_parents = 1,
> + /*
> + * It may be ao_sys's parent clock, its child clocks mark
> + * CLK_IS_CRITICAL, So mark CLK_IS_CRITICAL for it.
> + */
> + .flags = CLK_IS_CRITICAL,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_xtal = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_OSCIN_CTRL,
> + .mask = 0x1,
> + .shift = 0,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_xtal",
> + .ops = &clk_regmap_mux_ops,
> + /* ext_32k is from external PAD, do not automatically reparent */
> + .parent_data = (const struct clk_parent_data []) {
> + { .hw = &a9_ao_xtal_in.hw },
> + { .fw_name = "ext_32k", },
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_RATE_NO_REPARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_sys = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_OSCIN_CTRL,
> + .mask = 0x1,
> + .shift = 1,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_sys",
> + .ops = &clk_regmap_mux_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .hw = &a9_ao_xtal.hw },
> + { .fw_name = "sys", },
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_PARENT_GATE,
> + },
> +};
> +
> +static const struct clk_parent_data a9_ao_pclk_parents = { .hw = &a9_ao_sys.hw };
> +
> +#define A9_AO_PCLK(_name, _bit, _flags) \
> + MESON_PCLK(a9_ao_sys_##_name, AO_SYS_CLK0, _bit, \
> + &a9_ao_pclk_parents, _flags)
> +
> +/*
> + * A9 integrates a low-power microprocessor (Always-on CPU: AOCPU). Some AO sys
> + * clocks control the AOCPU modules. Mark the AOCPU-related clocks with
> + * CLK_IS_CRITICAL to avoid them being disabled and impacting AOCPU functionality.
> + * AOCPU-related clocks list:
> + * - clktree
> + * - rst_ctrl
> + * - pad
> + * - irq
> + * - pwrctrl
> + * - aocpu
> + * - sram
> + */
> +static A9_AO_PCLK(i2c3, 0, 0);
> +static A9_AO_PCLK(rtc_reg, 1, 0);
> +static A9_AO_PCLK(clktree, 2, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(rst_ctrl, 3, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pad, 4, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(rtc_dig, 5, 0);
> +static A9_AO_PCLK(irq, 6, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pwrctrl, 7, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pwm_a, 8, 0);
> +static A9_AO_PCLK(pwm_b, 9, 0);
> +static A9_AO_PCLK(pwm_c, 10, 0);
> +static A9_AO_PCLK(pwm_d, 11, 0);
> +static A9_AO_PCLK(pwm_e, 12, 0);
> +static A9_AO_PCLK(pwm_f, 13, 0);
> +static A9_AO_PCLK(pwm_g, 14, 0);
> +static A9_AO_PCLK(i2c_a, 15, 0);
> +static A9_AO_PCLK(i2c_b, 16, 0);
> +static A9_AO_PCLK(i2c_c, 17, 0);
> +static A9_AO_PCLK(i2c_d, 18, 0);
> +static A9_AO_PCLK(sed, 19, 0);
> +static A9_AO_PCLK(ir_ctrl, 20, 0);
> +static A9_AO_PCLK(uart_b, 21, 0);
> +static A9_AO_PCLK(uart_c, 22, 0);
> +static A9_AO_PCLK(uart_d, 23, 0);
> +static A9_AO_PCLK(uart_e, 24, 0);
> +static A9_AO_PCLK(spisg_0, 25, 0);
> +static A9_AO_PCLK(rtc_secure, 26, 0);
> +static A9_AO_PCLK(cec, 27, 0);
> +static A9_AO_PCLK(aocpu, 28, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(sram, 29, CLK_IS_CRITICAL);
> +static A9_AO_PCLK(spisg_1, 30, 0);
> +static A9_AO_PCLK(spisg_2, 31, 0);
> +
> +static const struct clk_parent_data a9_ao_pwm_parents[] = {
> + { .hw = &a9_ao_xtal.hw },
> + { .fw_name = "fdiv5", },
> + { .fw_name = "fdiv4", },
> + { .fw_name = "fdiv3", }
> +};
> +
> +static A9_COMP_SEL(ao_pwm_a, AO_PWM_CLK_A_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_a, AO_PWM_CLK_A_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_a, AO_PWM_CLK_A_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_b, AO_PWM_CLK_B_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_b, AO_PWM_CLK_B_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_b, AO_PWM_CLK_A_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_c, AO_PWM_CLK_C_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_c, AO_PWM_CLK_C_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_c, AO_PWM_CLK_C_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_d, AO_PWM_CLK_D_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_d, AO_PWM_CLK_D_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_d, AO_PWM_CLK_D_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_e, AO_PWM_CLK_E_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_e, AO_PWM_CLK_E_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_e, AO_PWM_CLK_E_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_f, AO_PWM_CLK_F_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_f, AO_PWM_CLK_F_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_f, AO_PWM_CLK_F_CTRL, 8);
> +
> +static A9_COMP_SEL(ao_pwm_g, AO_PWM_CLK_G_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(ao_pwm_g, AO_PWM_CLK_G_CTRL, 0, 8);
> +static A9_COMP_GATE(ao_pwm_g, AO_PWM_CLK_G_CTRL, 8);
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_in = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = AO_RTC_BY_OSCIN_CTRL0,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "ao_rtc_duandiv_in",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_xtal.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static const struct meson_clk_dualdiv_param a9_ao_dualdiv_table[] = {
> + { 733, 732, 8, 11, 1 },
> + { /* sentinel */ }
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_div = {
> + .data = &(struct meson_clk_dualdiv_data){
> + .n1 = {
> + .reg_off = AO_RTC_BY_OSCIN_CTRL0,
> + .shift = 0,
> + .width = 12,
> + },
> + .n2 = {
> + .reg_off = AO_RTC_BY_OSCIN_CTRL0,
> + .shift = 12,
> + .width = 12,
> + },
> + .m1 = {
> + .reg_off = AO_RTC_BY_OSCIN_CTRL1,
> + .shift = 0,
> + .width = 12,
> + },
> + .m2 = {
> + .reg_off = AO_RTC_BY_OSCIN_CTRL1,
> + .shift = 12,
> + .width = 12,
> + },
> + .dual = {
> + .reg_off = AO_RTC_BY_OSCIN_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .table = a9_ao_dualdiv_table,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "a9_ao_rtc_dualdiv_div",
> + .ops = &meson_clk_dualdiv_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_rtc_dualdiv_in.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_sel = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_RTC_BY_OSCIN_CTRL1,
> + .mask = 0x1,
> + .shift = 24,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_rtc_dualdiv_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_rtc_dualdiv_div.hw,
> + &a9_ao_rtc_dualdiv_in.hw,
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = AO_RTC_BY_OSCIN_CTRL0,
> + .bit_idx = 30,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "ao_rtc_dualdiv",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_rtc_dualdiv_sel.hw
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_rtc = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_RTC_BY_OSCIN_CTRL1,
> + .mask = 0x1,
> + .shift = 30,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_rtc",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_xtal.hw,
> + &a9_ao_rtc_dualdiv.hw,
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_in = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = AO_CEC_CTRL0,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "ao_cec_dualdiv_in",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_xtal.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_div = {
> + .data = &(struct meson_clk_dualdiv_data){
> + .n1 = {
> + .reg_off = AO_CEC_CTRL0,
> + .shift = 0,
> + .width = 12,
> + },
> + .n2 = {
> + .reg_off = AO_CEC_CTRL0,
> + .shift = 12,
> + .width = 12,
> + },
> + .m1 = {
> + .reg_off = AO_CEC_CTRL1,
> + .shift = 0,
> + .width = 12,
> + },
> + .m2 = {
> + .reg_off = AO_CEC_CTRL1,
> + .shift = 12,
> + .width = 12,
> + },
> + .dual = {
> + .reg_off = AO_CEC_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .table = a9_ao_dualdiv_table,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_cec_dualdiv_div",
> + .ops = &meson_clk_dualdiv_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_cec_dualdiv_in.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_sel = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_CEC_CTRL1,
> + .mask = 0x1,
> + .shift = 24,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_cec_dualdiv_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_cec_dualdiv_div.hw,
> + &a9_ao_cec_dualdiv_in.hw,
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = AO_CEC_CTRL0,
> + .bit_idx = 30,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_cec_dualdiv",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_cec_dualdiv_sel.hw
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap a9_ao_cec = {
> + .data = &(struct clk_regmap_mux_data) {
> + .offset = AO_CEC_CTRL1,
> + .mask = 0x1,
> + .shift = 30,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "ao_cec",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a9_ao_cec_dualdiv.hw,
> + &a9_ao_rtc.hw,
> + },
> + .num_parents = 2,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_hw *a9_ao_hw_clks[] = {
> + [CLKID_AO_XTAL_IN] = &a9_ao_xtal_in.hw,
> + [CLKID_AO_XTAL] = &a9_ao_xtal.hw,
> + [CLKID_AO_SYS] = &a9_ao_sys.hw,
> + [CLKID_AO_SYS_I3C] = &a9_ao_sys_i2c3.hw,
> + [CLKID_AO_SYS_RTC_REG] = &a9_ao_sys_rtc_reg.hw,
> + [CLKID_AO_SYS_CLKTREE] = &a9_ao_sys_clktree.hw,
> + [CLKID_AO_SYS_RST_CTRL] = &a9_ao_sys_rst_ctrl.hw,
> + [CLKID_AO_SYS_PAD] = &a9_ao_sys_pad.hw,
> + [CLKID_AO_SYS_RTC_DIG] = &a9_ao_sys_rtc_dig.hw,
> + [CLKID_AO_SYS_IRQ] = &a9_ao_sys_irq.hw,
> + [CLKID_AO_SYS_PWRCTRL] = &a9_ao_sys_pwrctrl.hw,
> + [CLKID_AO_SYS_PWM_A] = &a9_ao_sys_pwm_a.hw,
> + [CLKID_AO_SYS_PWM_B] = &a9_ao_sys_pwm_b.hw,
> + [CLKID_AO_SYS_PWM_C] = &a9_ao_sys_pwm_c.hw,
> + [CLKID_AO_SYS_PWM_D] = &a9_ao_sys_pwm_d.hw,
> + [CLKID_AO_SYS_PWM_E] = &a9_ao_sys_pwm_e.hw,
> + [CLKID_AO_SYS_PWM_F] = &a9_ao_sys_pwm_f.hw,
> + [CLKID_AO_SYS_PWM_G] = &a9_ao_sys_pwm_g.hw,
> + [CLKID_AO_SYS_I2C_A] = &a9_ao_sys_i2c_a.hw,
> + [CLKID_AO_SYS_I2C_B] = &a9_ao_sys_i2c_b.hw,
> + [CLKID_AO_SYS_I2C_C] = &a9_ao_sys_i2c_c.hw,
> + [CLKID_AO_SYS_I2C_D] = &a9_ao_sys_i2c_d.hw,
> + [CLKID_AO_SYS_SED] = &a9_ao_sys_sed.hw,
> + [CLKID_AO_SYS_IR_CTRL] = &a9_ao_sys_ir_ctrl.hw,
> + [CLKID_AO_SYS_UART_B] = &a9_ao_sys_uart_b.hw,
> + [CLKID_AO_SYS_UART_C] = &a9_ao_sys_uart_c.hw,
> + [CLKID_AO_SYS_UART_D] = &a9_ao_sys_uart_d.hw,
> + [CLKID_AO_SYS_UART_E] = &a9_ao_sys_uart_e.hw,
> + [CLKID_AO_SYS_SPISG_0] = &a9_ao_sys_spisg_0.hw,
> + [CLKID_AO_SYS_RTC_SECURE] = &a9_ao_sys_rtc_secure.hw,
> + [CLKID_AO_SYS_CEC] = &a9_ao_sys_cec.hw,
> + [CLKID_AO_SYS_AOCPU] = &a9_ao_sys_aocpu.hw,
> + [CLKID_AO_SYS_SRAM] = &a9_ao_sys_sram.hw,
> + [CLKID_AO_SYS_SPISG_1] = &a9_ao_sys_spisg_1.hw,
> + [CLKID_AO_SYS_SPISG_2] = &a9_ao_sys_spisg_2.hw,
> + [CLKID_AO_PWM_A_SEL] = &a9_ao_pwm_a_sel.hw,
> + [CLKID_AO_PWM_A_DIV] = &a9_ao_pwm_a_div.hw,
> + [CLKID_AO_PWM_A] = &a9_ao_pwm_a.hw,
> + [CLKID_AO_PWM_B_SEL] = &a9_ao_pwm_b_sel.hw,
> + [CLKID_AO_PWM_B_DIV] = &a9_ao_pwm_b_div.hw,
> + [CLKID_AO_PWM_B] = &a9_ao_pwm_b.hw,
> + [CLKID_AO_PWM_C_SEL] = &a9_ao_pwm_c_sel.hw,
> + [CLKID_AO_PWM_C_DIV] = &a9_ao_pwm_c_div.hw,
> + [CLKID_AO_PWM_C] = &a9_ao_pwm_c.hw,
> + [CLKID_AO_PWM_D_SEL] = &a9_ao_pwm_d_sel.hw,
> + [CLKID_AO_PWM_D_DIV] = &a9_ao_pwm_d_div.hw,
> + [CLKID_AO_PWM_D] = &a9_ao_pwm_d.hw,
> + [CLKID_AO_PWM_E_SEL] = &a9_ao_pwm_e_sel.hw,
> + [CLKID_AO_PWM_E_DIV] = &a9_ao_pwm_e_div.hw,
> + [CLKID_AO_PWM_E] = &a9_ao_pwm_e.hw,
> + [CLKID_AO_PWM_F_SEL] = &a9_ao_pwm_f_sel.hw,
> + [CLKID_AO_PWM_F_DIV] = &a9_ao_pwm_f_div.hw,
> + [CLKID_AO_PWM_F] = &a9_ao_pwm_f.hw,
> + [CLKID_AO_PWM_G_SEL] = &a9_ao_pwm_g_sel.hw,
> + [CLKID_AO_PWM_G_DIV] = &a9_ao_pwm_g_div.hw,
> + [CLKID_AO_PWM_G] = &a9_ao_pwm_g.hw,
> + [CLKID_AO_RTC_DUALDIV_IN] = &a9_ao_rtc_dualdiv_in.hw,
> + [CLKID_AO_RTC_DUALDIV_DIV] = &a9_ao_rtc_dualdiv_div.hw,
> + [CLKID_AO_RTC_DUALDIV_SEL] = &a9_ao_rtc_dualdiv_sel.hw,
> + [CLKID_AO_RTC_DUALDIV] = &a9_ao_rtc_dualdiv.hw,
> + [CLKID_AO_RTC] = &a9_ao_rtc.hw,
> + [CLKID_AO_CEC_DUALDIV_IN] = &a9_ao_cec_dualdiv_in.hw,
> + [CLKID_AO_CEC_DUALDIV_DIV] = &a9_ao_cec_dualdiv_div.hw,
> + [CLKID_AO_CEC_DUALDIV_SEL] = &a9_ao_cec_dualdiv_sel.hw,
> + [CLKID_AO_CEC_DUALDIV] = &a9_ao_cec_dualdiv.hw,
> + [CLKID_AO_CEC] = &a9_ao_cec.hw,
> +};
> +
> +static const struct meson_clkc_data a9_ao_clkc_data = {
> + .hw_clks = {
> + .hws = a9_ao_hw_clks,
> + .num = ARRAY_SIZE(a9_ao_hw_clks),
> + },
> +};
> +
> +static const struct of_device_id a9_ao_clkc_match_table[] = {
> + {
> + .compatible = "amlogic,a9-aoclkc",
> + .data = &a9_ao_clkc_data,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, a9_ao_clkc_match_table);
> +
> +static struct platform_driver a9_ao_clkc_driver = {
> + .probe = meson_clkc_mmio_probe,
> + .driver = {
> + .name = "a9-aoclkc",
> + .of_match_table = a9_ao_clkc_match_table,
> + },
> +};
> +module_platform_driver(a9_ao_clkc_driver);
> +
> +MODULE_DESCRIPTION("Amlogic A9 Always-ON Clock Controller driver");
> +MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS("CLK_MESON");
--
Jerome
prev parent reply other threads:[~2026-05-14 16:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 12:47 [PATCH 00/10] Add support for A9 family clock controller Jian Hu via B4 Relay
2026-05-11 12:47 ` [PATCH 01/10] dt-bindings: clock: Add Amlogic A9 SCMI " Jian Hu via B4 Relay
2026-05-11 12:47 ` [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL " Jian Hu via B4 Relay
2026-05-11 12:47 ` [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals " Jian Hu via B4 Relay
2026-05-14 16:15 ` Jerome Brunet
2026-05-11 12:47 ` [PATCH 04/10] dt-bindings: clock: Add Amlogic A9 AO " Jian Hu via B4 Relay
2026-05-11 12:47 ` [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration Jian Hu via B4 Relay
2026-05-11 15:47 ` Brian Masney
2026-05-14 15:13 ` Jerome Brunet
2026-05-11 12:47 ` [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration Jian Hu via B4 Relay
2026-05-11 15:21 ` Brian Masney
2026-05-13 3:53 ` Jian Hu
2026-05-14 15:16 ` Jerome Brunet
2026-05-11 12:47 ` [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider Jian Hu via B4 Relay
2026-05-11 15:23 ` Brian Masney
2026-05-14 15:11 ` Jerome Brunet
2026-05-11 12:47 ` [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver Jian Hu via B4 Relay
2026-05-11 15:36 ` Brian Masney
2026-05-13 7:25 ` Jian Hu
2026-05-14 16:12 ` Jerome Brunet
2026-05-11 12:47 ` [PATCH 09/10] clk: amlogic: Add A9 peripherals " Jian Hu via B4 Relay
2026-05-11 15:42 ` Brian Masney
2026-05-13 8:50 ` Jian Hu
2026-05-11 12:47 ` [PATCH 10/10] clk: amlogic: Add A9 AO " Jian Hu via B4 Relay
2026-05-11 15:45 ` Brian Masney
2026-05-13 9:19 ` Jian Hu
2026-05-14 16:27 ` Jerome Brunet [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1j33zu6jnl.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+jian.hu.amlogic.com@kernel.org \
--cc=jian.hu@amlogic.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox