Re: [PATCH 6/7] arm64: dts: amlogic: Add clock and EMMC for T7

[Jerome Brunet <jbrunet@baylibre.com>]

On mer. 18 févr. 2026 at 12:20, Ronald Claveau <linux-kernel-dev@aliel.fr> wrote:

> Add fixed clock and EMMC support for Amlogic T7 SoC family dtsi.

One topic per patch please

>
> Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
> ---
>  arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 129 ++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index 6510068bcff9..b84281e5cdd8 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -3,6 +3,8 @@
>   * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>   */
>  
> +#include <dt-bindings/clock/amlogic,t7-peripherals-clkc.h>
> +#include <dt-bindings/clock/amlogic,t7-pll-clkc.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/amlogic,t7-pwrc.h>
>  #include "amlogic-t7-reset.h"
> @@ -224,6 +226,24 @@ apb4: bus@fe000000 {
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>  
> +			clkc: clock-controller@0 {
> +				compatible = "amlogic,t7-peripherals-clkc";
> +				reg = <0x0 0x0 0x0 0x49c>;
> +				#clock-cells = <1>;
> +				clocks = <&xtal>,
> +						 <&fpll CLKID_FDIV2>,
> +						 <&fpll CLKID_FDIV2P5>,
> +						 <&fpll CLKID_FDIV3>,
> +						 <&fpll CLKID_FDIV4>,
> +						 <&fpll CLKID_FDIV5>,
> +						 <&hifi_pll CLKID_HIFI_PLL>,
> +						 <&mpll CLKID_MPLL2>,
> +						 <&mpll CLKID_MPLL3>,
> +						 <&gp0_pll CLKID_GP0_PLL>;
> +				clock-names = "xtal", "fdiv2", "fdiv2p5", "fdiv3", "fdiv4",
> +							  "fdiv5", "hifi", "mpll2", "mpll3", "gp0";
> +			};
> +
>  			reset: reset-controller@2000 {
>  				compatible = "amlogic,t7-reset";
>  				reg = <0x0 0x2000 0x0 0x98>;
> @@ -250,6 +270,68 @@ gpio: bank@4000 {
>  					#gpio-cells = <2>;
>  					gpio-ranges = <&periphs_pinctrl 0 0 157>;
>  				};
> +
> +				emmc_ctrl_pins: emmc-ctrl {
> +					mux-0 {
> +						groups = "emmc_cmd";
> +						function = "emmc";
> +						bias-pull-up;
> +						drive-strength-microamp = <4000>;
> +					};
> +
> +					mux-1 {
> +						groups = "emmc_clk";
> +						function = "emmc";
> +						bias-disable;
> +						drive-strength-microamp = <4000>;
> +					};
> +				};
> +
> +				emmc_data_4b_pins: emmc-data-4b {
> +					mux-0 {
> +						groups = "emmc_nand_d0",
> +								 "emmc_nand_d1",
> +								 "emmc_nand_d2",
> +								 "emmc_nand_d3";
> +						function = "emmc";
> +						bias-pull-up;
> +						drive-strength-microamp = <4000>;
> +					};
> +				};
> +
> +				emmc_data_8b_pins: emmc-data-8b {
> +					mux-0 {
> +						groups = "emmc_nand_d0",
> +								 "emmc_nand_d1",
> +								 "emmc_nand_d2",
> +								 "emmc_nand_d3",
> +								 "emmc_nand_d4",
> +								 "emmc_nand_d5",
> +								 "emmc_nand_d6",
> +								 "emmc_nand_d7";
> +						function = "emmc";
> +						bias-pull-up;
> +						drive-strength-microamp = <4000>;
> +					};
> +				};
> +
> +				emmc_ds_pins: emmc-ds {
> +					mux {
> +						groups = "emmc_nand_ds";
> +						function = "emmc";
> +						bias-pull-down;
> +						drive-strength-microamp = <4000>;
> +					};
> +				};
> +
> +				emmc_clk_gate_pins: emmc_clk_gate {
> +					mux {
> +						groups = "GPIOB_8";
> +						function = "gpio_periphs";
> +						bias-pull-down;
> +						drive-strength-microamp = <4000>;
> +					};
> +				};
>  			};
>  
>  			gpio_intc: interrupt-controller@4080 {
> @@ -262,6 +344,38 @@ gpio_intc: interrupt-controller@4080 {
>  					<10 11 12 13 14 15 16 17 18 19 20 21>;
>  			};
>  
> +			fpll: clock-controller@8040 {
> +				compatible = "amlogic,t7-fpll";
> +				reg = <0x0 0x8040 0x0 0x20>;
> +				#clock-cells = <1>;
> +				clocks = <&xtal>;
> +				clock-names = "xtal";
> +			};
> +
> +			gp0_pll: clock-controller@8080 {
> +				compatible = "amlogic,t7-gp0-pll";
> +				reg = <0x0 0x8080 0x0 0x20>;
> +				#clock-cells = <1>;
> +				clocks = <&xtal>;
> +				clock-names = "in0";
> +			};
> +
> +			hifi_pll: clock-controller@8100 {
> +				compatible = "amlogic,t7-hifi-pll";
> +				reg = <0x0 0x8100 0x0 0x20>;
> +				#clock-cells = <1>;
> +				clocks = <&xtal>;
> +				clock-names = "in0";
> +			};
> +
> +			mpll: clock-controller@8180 {
> +				compatible = "amlogic,t7-mpll";
> +				reg = <0x0 0x8180 0x0 0x20>;
> +				#clock-cells = <1>;
> +				clocks = <&fpll CLKID_FPLL_DCO>;
> +				clock-names = "in0";
> +			};
> +
>  			uart_a: serial@78000 {
>  				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
>  				reg = <0x0 0x78000 0x0 0x18>;
> @@ -276,6 +390,21 @@ sec_ao: ao-secure@10220 {
>  				reg = <0x0 0x10220 0x0 0x140>;
>  				amlogic,has-chip-id;
>  			};
> +
> +			sd_emmc_c: mmc@8c000{
> +				compatible = "amlogic,meson-axg-mmc";
> +				reg = <0x0 0x8c000 0x0 0x800>;
> +				interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&clkc CLKID_SYS_SD_EMMC_C>,
> +						 <&clkc CLKID_SD_EMMC_C>,
> +						 <&gp0_pll CLKID_GP0_PLL>;
> +				clock-names = "core", "clkin0", "clkin1";
> +				assigned-clocks = <&clkc CLKID_SD_EMMC_C_SEL>;
> +				assigned-clock-parents = <&xtal>;
> +				no-sdio;
> +				no-sd;
> +			};
>  		};
>  
>  	};

-- 
Jerome