From: Jerome Brunet <jbrunet@baylibre.com>
To: Frank Li <Frank.li@nxp.com>
Cc: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Abel Vesa" <abelvesa@kernel.org>, "Peng Fan" <peng.fan@nxp.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
linux-mips@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 3/4] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper
Date: Mon, 23 Jun 2025 11:04:12 +0200 [thread overview]
Message-ID: <1jikkmkewj.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <aEmzRrhQC+olmywj@lizhi-Precision-Tower-5810> (Frank Li's message of "Wed, 11 Jun 2025 12:48:06 -0400")
On Wed 11 Jun 2025 at 12:48, Frank Li <Frank.li@nxp.com> wrote:
> On Wed, Jun 11, 2025 at 02:53:58PM +0200, Jerome Brunet wrote:
>> The auxiliary device creation of this driver is simple enough to
>> use the available auxiliary device creation helper.
>>
>> Use it and remove some boilerplate code.
>
> Actaully, you also remove unused struct clk_imx8mp_audiomix_priv *priv
> at clk_imx8mp_audiomix_reset_controller_register().
>
> Please add it into comments.
That's merely a side effect of removing the boilerplate code.
Like for the other changes of the same kind, I don't think listing the
symbols removed would be useful to the change description
>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>> drivers/clk/imx/clk-imx8mp-audiomix.c | 49 ++++++-----------------------------
>> 1 file changed, 8 insertions(+), 41 deletions(-)
>>
>> diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
>> index 775f62dddb11d8cfd17a4ebf7a677ef399c5e617..765fb1f5bd4fa2b039d7414abd89471438ee41dd 100644
>> --- a/drivers/clk/imx/clk-imx8mp-audiomix.c
>> +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
>> @@ -230,61 +230,28 @@ struct clk_imx8mp_audiomix_priv {
>>
>> #if IS_ENABLED(CONFIG_RESET_CONTROLLER)
>>
>> -static void clk_imx8mp_audiomix_reset_unregister_adev(void *_adev)
>> +static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev)
>> {
>> - struct auxiliary_device *adev = _adev;
>> -
>> - auxiliary_device_delete(adev);
>> - auxiliary_device_uninit(adev);
>> -}
>> -
>> -static void clk_imx8mp_audiomix_reset_adev_release(struct device *dev)
>> -{
>> - struct auxiliary_device *adev = to_auxiliary_dev(dev);
>> -
>> - kfree(adev);
>> -}
>> -
>> -static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev,
>> - struct clk_imx8mp_audiomix_priv *priv)
>> -{
>> - struct auxiliary_device *adev __free(kfree) = NULL;
>> - int ret;
>> + struct auxiliary_device *adev;
>>
>> if (!of_property_present(dev->of_node, "#reset-cells"))
>> return 0;
>>
>> - adev = kzalloc(sizeof(*adev), GFP_KERNEL);
>> + adev = devm_auxiliary_device_create(dev, "reset", NULL);
>> if (!adev)
>> - return -ENOMEM;
>> -
>> - adev->name = "reset";
>> - adev->dev.parent = dev;
>> - adev->dev.release = clk_imx8mp_audiomix_reset_adev_release;
>> -
>> - ret = auxiliary_device_init(adev);
>> - if (ret)
>> - return ret;
>> + return -ENODEV;
>>
>> - ret = auxiliary_device_add(adev);
>> - if (ret) {
>> - auxiliary_device_uninit(adev);
>> - return ret;
>> - }
>> -
>> - return devm_add_action_or_reset(dev, clk_imx8mp_audiomix_reset_unregister_adev,
>> - no_free_ptr(adev));
>> + return 0;
>> }
>>
>> #else /* !CONFIG_RESET_CONTROLLER */
>>
>> -static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev,
>> - struct clk_imx8mp_audiomix_priv *priv)
>> +static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev)
>> {
>> return 0;
>> }
>>
>> -#endif /* !CONFIG_RESET_CONTROLLER */
>> +#endif
>>
>> static void clk_imx8mp_audiomix_save_restore(struct device *dev, bool save)
>> {
>> @@ -408,7 +375,7 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
>> if (ret)
>> goto err_clk_register;
>>
>> - ret = clk_imx8mp_audiomix_reset_controller_register(dev, priv);
>> + ret = clk_imx8mp_audiomix_reset_controller_register(dev);
>> if (ret)
>> goto err_clk_register;
>>
>>
>> --
>> 2.47.2
>>
--
Jerome
next prev parent reply other threads:[~2025-06-23 9:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-11 12:53 [PATCH 0/4] clk: use the auxiliary device creation helper Jerome Brunet
2025-06-11 12:53 ` [PATCH 1/4] clk: eyeq: " Jerome Brunet
2025-06-11 12:53 ` [PATCH 2/4] reset: eyeq: drop device_set_of_node_from_dev() done by parent Jerome Brunet
2025-06-11 12:53 ` [PATCH 3/4] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper Jerome Brunet
2025-06-11 16:48 ` Frank Li
2025-06-23 9:04 ` Jerome Brunet [this message]
2025-06-11 12:53 ` [PATCH 4/4] clk: amlogic: axg-audio: use the auxiliary reset driver Jerome Brunet
2025-06-23 13:29 ` (subset) [PATCH 0/4] clk: use the auxiliary device creation helper Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1jikkmkewj.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=Frank.li@nxp.com \
--cc=abelvesa@kernel.org \
--cc=festevam@gmail.com \
--cc=gregory.clement@bootlin.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=theo.lebrun@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox