From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Wed, 14 Mar 2018 09:14:43 +0100 Subject: [PATCH v2 1/6] phy: rockchip-typec: fall back to working in host-mode if extcon is missing. In-Reply-To: <20180301152515.20940-2-enric.balletbo@collabora.com> References: <20180301152515.20940-1-enric.balletbo@collabora.com> <20180301152515.20940-2-enric.balletbo@collabora.com> Message-ID: <20019382.PXhIOVQJGo@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Kishon, Am Donnerstag, 1. M?rz 2018, 16:25:10 CET schrieb Enric Balletbo i Serra: > Right now the rockchip type-c phy does fail probing when no extcon is > detected. Some boards get the cable-state via the extcon interface and > have this supported, other boards seem to use the fusb302 chip or > another but the driver currently does not seem to utilize the extcon > interface to report the cable-state. And, other, just connect the type-c > to a standard USB-A port so use no controller at all. A missing extcon > shouldn't fail to probe, instead, should just fall back to working in > host-mode if it cannot get the extcon. > > Fixes: c301b327aea898af ("arm64: dts: rockchip: add usb3-phy otg-port > support for rk3399") Reported-by: Vicente Bergas > Signed-off-by: Enric Balletbo i Serra Reviewed-by: Heiko Stuebner I did revert the original commit mentioned in the fixes tag for 4.16-rc but it would nevertheless be really cool if these 2 patches (code + binding) could make it into your tree for 4.17 :-) And ideally also with the other 5 patches from Enric starting at [PATCH v3 1/6] phy: rockchip-typec: deprecate some DT properties for various register fields. from 2018-02-16. Thanks Heiko