2.6.32-rc1: spitz boots but suspend/resume is broken

[pavel@ucw.cz (Pavel Machek)]

On Fri 2009-10-02 09:32:05, Sascha Hauer wrote:
> Hi,
> 
> On Fri, Oct 02, 2009 at 06:10:15AM +0200, Pavel Machek wrote:
> > On Wed 2009-09-30 16:09:25, Dmitry Eremin-Solenikov wrote:
> > > On Wed, Sep 30, 2009 at 4:06 PM, Pavel Machek <pavel@ucw.cz> wrote:
> > > > Hi!
> > > >
> > > > matrix keyboard driver needs to be enabled, otherwise it seems ok.
> > > >
> > > > Unfortunately, it does not respond to power button in any visible way
> > > > :-(. Any ideas what might be wrong/how to debug it?
> > > 
> > > Enable gpio-keyboard driver, verify (or port power button to it :))
> > > and check that
> > > enable_wakeup is enabled.
> > 
> > It seems neccessary tables for gpio-keyboard just are not there :-(.
> > 
> > In the meantime, this allows easy switch to known-good driver. (Can we
> > get it upstream until problem is fixed properly?)
> > 
> > Unfortunately, that still does not fix suspend/resume. (Does it work
> > for you?)
> 
> Are you using the serial console on spitz? If yes, this might be
> interesting for you:

I don't have serial cable :(.

> http://bugzilla.kernel.org/show_bug.cgi?id=14297
> 
> I ended up with a console with 9600 baud after resume. My system resumed
> correctly, but I did not see anything.

...but someone with serial cable capturing 2.6.32-rc2 resume would
certainly be welcome :).
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html