From: cgagneraud@techworks.ie (Christian Gagneraud)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1.0 3/4] EP93XX: Add more register definition
Date: Sun, 04 Oct 2009 02:14:29 +0100 [thread overview]
Message-ID: <20091004011429.12578.27177.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091004011413.12578.89897.stgit@localhost.localdomain>
Add register definition for GPIO A,B,C and D data and data direction,
Security, Chip ID, ...
Signed-off-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: Christian Gagneraud <cgagneraud@techworks.ie>
---
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index c5216fc..a5f721e 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -111,28 +111,42 @@
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_A_DATA EP93XX_GPIO_REG(0x00)
+#define EP93XX_GPIO_B_DATA EP93XX_GPIO_REG(0x04)
+#define EP93XX_GPIO_C_DATA EP93XX_GPIO_REG(0x08)
+#define EP93XX_GPIO_D_DATA EP93XX_GPIO_REG(0x0C)
+#define EP93XX_GPIO_A_DIR EP93XX_GPIO_REG(0x10)
+#define EP93XX_GPIO_B_DIR EP93XX_GPIO_REG(0x14)
+#define EP93XX_GPIO_C_DIR EP93XX_GPIO_REG(0x18)
+#define EP93XX_GPIO_D_DIR EP93XX_GPIO_REG(0x1C)
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_F_INT_DEBOUNCE EP93XX_GPIO_REG(0x64)
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_DEBOUNCE EP93XX_GPIO_REG(0xa8)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_B_INT_DEBOUNCE EP93XX_GPIO_REG(0xc4)
#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
+#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
@@ -221,6 +235,7 @@
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_CHIPID EP93XX_SYSCON_REG(0x94)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
next prev parent reply other threads:[~2009-10-04 1:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-04 1:14 [RFC][PATCH v1.0] Update and enhance TS-7XXX support Christian Gagneraud
2009-10-04 1:14 ` [PATCH v1.0 1/4] EP93XX: Allow to force nF bit in control reg Christian Gagneraud
2009-10-04 1:14 ` [PATCH v1.0 2/4] TS72XX: Allow to override machine ID Christian Gagneraud
2009-10-04 11:05 ` Matthieu Crapet
2009-10-04 11:13 ` Alexander Clouter
2009-10-04 18:34 ` Bill Gatliff
2009-10-04 18:35 ` Bill Gatliff
2009-10-04 11:21 ` Russell King - ARM Linux
2009-10-04 11:55 ` Christian Gagneraud
2009-10-04 23:03 ` H Hartley Sweeten
2009-10-05 12:17 ` Christian Gagneraud
2009-10-05 14:10 ` Alexander Clouter
2009-10-05 15:15 ` Mikael Pettersson
2009-10-05 16:01 ` Marek Vasut
2009-10-05 18:34 ` Christian Gagneraud
2009-10-04 1:14 ` Christian Gagneraud [this message]
2009-10-04 19:33 ` [PATCH v1.0 3/4] EP93XX: Add more register definition Ryan Mallon
2009-10-04 23:09 ` H Hartley Sweeten
2009-10-05 12:06 ` Christian Gagneraud
2009-10-05 16:51 ` H Hartley Sweeten
2009-10-05 18:30 ` Christian Gagneraud
2009-10-04 1:14 ` [PATCH v1.0 4/4] MM: Switch TS72XX to use sparemem Christian Gagneraud
2009-10-05 12:21 ` Christian Gagneraud
2009-10-05 17:06 ` H Hartley Sweeten
2009-10-05 18:16 ` Christian Gagneraud
2009-10-05 18:52 ` H Hartley Sweeten
2009-10-06 21:21 ` Christian Gagneraud
2009-10-06 21:26 ` Christian Gagneraud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091004011429.12578.27177.stgit@localhost.localdomain \
--to=cgagneraud@techworks.ie \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).