From mboxrd@z Thu Jan 1 00:00:00 1970 From: alex@digriz.org.uk (Alexander Clouter) Date: Fri, 9 Oct 2009 16:24:07 +0100 Subject: [PATCH] [ARM] kirkwood: combine support for openrd base/client support In-Reply-To: <200910091600.45161.dk-arm-linux@gmx.de> References: <20091009123956.GA6085@chipmunk> <200910091600.45161.dk-arm-linux@gmx.de> Message-ID: <20091009152407.GE6085@chipmunk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, * Dieter Kiermaier [2009-10-09 16:00:44+0200]: > > [snipped] > > Additionally it would be nice, if you could integrate the i2c / pcie init in your patch? > Please see Simons patch at: > http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001950.html > Well on my Client board I get: ---- northdown:~# dmesg | grep -i PCI pci 0000:00:00.0: reg 10 64bit mmio pref: [0xf1000000-0xf10fffff] pci 0000:00:00.0: reg 18 32bit mmio: [0x000000-0x1fffffff] pci 0000:00:00.0: supports D1 D2 PCI: bus0: Fast back to back transfers disabled northdown:~# lspci -vvv 00:00.0 Memory controller: Marvell Technology Group Ltd. Device 6281 (rev 02) Subsystem: Marvell Technology Group Ltd. Device 11ab Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (64-bit, prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting ---- I guess it is working fine, however as there is no PCI(e) slot to use, I'm going to disable the call for the OpenRD Client as it's pointless; unless someone objects? Cheers -- Alexander Clouter .sigmonster says: Dyslexia means never having to say that you're ysror.