* Some light on FastFPE
@ 2009-10-07 1:22 Jacky Lam
2009-10-07 1:50 ` Nicolas Pitre
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Jacky Lam @ 2009-10-07 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Dear All,
Could anyone point me some light on how to get the current source code
of FastFPE?
Thanks very much.
BR,
Jacky
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
2009-10-07 1:22 Some light on FastFPE Jacky Lam
@ 2009-10-07 1:50 ` Nicolas Pitre
2009-10-07 9:02 ` Jamie Lokier
2009-10-07 7:35 ` Russell King - ARM Linux
2009-10-09 19:31 ` Peter Teichmann
2 siblings, 1 reply; 7+ messages in thread
From: Nicolas Pitre @ 2009-10-07 1:50 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 7 Oct 2009, Jacky Lam wrote:
> Dear All,
>
> Could anyone point me some light on how to get the current source code
> of FastFPE?
Why? You would get much faster results by using user space based
soft-float.
Nicolas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
@ 2009-10-07 2:01 Jacky Lam
2009-10-07 2:12 ` Nicolas Pitre
0 siblings, 1 reply; 7+ messages in thread
From: Jacky Lam @ 2009-10-07 2:01 UTC (permalink / raw)
To: linux-arm-kernel
Nicolas Pitre ??:
> On Wed, 7 Oct 2009, Jacky Lam wrote:
>
>> Dear All,
>>
>> Could anyone point me some light on how to get the current source code
>> of FastFPE?
>
> Why? You would get much faster results by using user space based
> soft-float.
>
>
> Nicolas
>
>
Yes, I have read the FAQ. But for historical reason, I still need the
support of hard float. Please point me to the source if it is still
being maintained.
Thanks.
Jacky
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
2009-10-07 2:01 Jacky Lam
@ 2009-10-07 2:12 ` Nicolas Pitre
0 siblings, 0 replies; 7+ messages in thread
From: Nicolas Pitre @ 2009-10-07 2:12 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 7 Oct 2009, Jacky Lam wrote:
> Nicolas Pitre ??:
> > On Wed, 7 Oct 2009, Jacky Lam wrote:
> >
> >> Dear All,
> >>
> >> Could anyone point me some light on how to get the current source code
> >> of FastFPE?
> >
> > Why? You would get much faster results by using user space based
> > soft-float.
> >
> >
> > Nicolas
> >
> >
> Yes, I have read the FAQ. But for historical reason, I still need the
> support of hard float. Please point me to the source if it is still
> being maintained.
I personally have no idea where to find them.
Nicolas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
2009-10-07 1:22 Some light on FastFPE Jacky Lam
2009-10-07 1:50 ` Nicolas Pitre
@ 2009-10-07 7:35 ` Russell King - ARM Linux
2009-10-09 19:31 ` Peter Teichmann
2 siblings, 0 replies; 7+ messages in thread
From: Russell King - ARM Linux @ 2009-10-07 7:35 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 07, 2009 at 09:22:28AM +0800, Jacky Lam wrote:
> Could anyone point me some light on how to get the current source code
> of FastFPE?
You'll have to extract it from the old 2.4 patches - you can find it
in patch-2.4.27-vrs1.bz2.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
2009-10-07 1:50 ` Nicolas Pitre
@ 2009-10-07 9:02 ` Jamie Lokier
0 siblings, 0 replies; 7+ messages in thread
From: Jamie Lokier @ 2009-10-07 9:02 UTC (permalink / raw)
To: linux-arm-kernel
Nicolas Pitre wrote:
> On Wed, 7 Oct 2009, Jacky Lam wrote:
>
> > Dear All,
> >
> > Could anyone point me some light on how to get the current source code
> > of FastFPE?
>
> Why? You would get much faster results by using user space based
> soft-float.
Only if you have source code.
-- Jamie
^ permalink raw reply [flat|nested] 7+ messages in thread
* Some light on FastFPE
2009-10-07 1:22 Some light on FastFPE Jacky Lam
2009-10-07 1:50 ` Nicolas Pitre
2009-10-07 7:35 ` Russell King - ARM Linux
@ 2009-10-09 19:31 ` Peter Teichmann
2 siblings, 0 replies; 7+ messages in thread
From: Peter Teichmann @ 2009-10-09 19:31 UTC (permalink / raw)
To: linux-arm-kernel
Am Wednesday 07 October 2009 03:22:28 schrieb Jacky Lam:
> Dear All,
>
> Could anyone point me some light on how to get the current source code
> of FastFPE?
I do not have access to the most recent version presently, but version 0.95
is available at:
http://www.peter-teichmann.de/download/fastfpe_0.95.tar.bz2
Peter
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-10-09 19:31 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-07 1:22 Some light on FastFPE Jacky Lam
2009-10-07 1:50 ` Nicolas Pitre
2009-10-07 9:02 ` Jamie Lokier
2009-10-07 7:35 ` Russell King - ARM Linux
2009-10-09 19:31 ` Peter Teichmann
-- strict thread matches above, loose matches on Subject: below --
2009-10-07 2:01 Jacky Lam
2009-10-07 2:12 ` Nicolas Pitre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).