From mboxrd@z Thu Jan 1 00:00:00 1970 From: sameo@linux.intel.com (Samuel Ortiz) Date: Mon, 12 Oct 2009 18:33:22 +0200 Subject: [PATCH v3 7/7] mfd: add AB4500 SPI used in U8500 In-Reply-To: <1255300105.21542.415.camel@vinay-desktop> References: <1255300105.21542.415.camel@vinay-desktop> Message-ID: <20091012163321.GB20786@sortiz.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Srinidhi, On Mon, Oct 12, 2009 at 03:58:25AM +0530, srinidhi kasagar wrote: > From: srinidhi kasagar > > This adds core driver support for AB4500 mixed signal > multimedia & power management chip. This connects to U8500 > on the SSP (pl022) and exports read/write functions for > the device to get access to this chip. This also registers > the client devices and sets the parent. > > The chip is now called as AB4500, whereas in the older version > it was called as STW4500. This just renames stw4500 as ab4500. Path applied to my for-next branch, thanks. I had to apply a build fix for this driver as it wouldnt build as a module. See: http://git.kernel.org/?p=linux/kernel/git/sameo/mfd-2.6.git;a=commit;h=2c7ddb89e5fb17723198cf7e67c80a324d1d9784 Cheers, Samuel. > Signed-off-by: srinidhi kasagar > Acked-by: Andrea Gallo > Reviewed-by: Mark Brown > Reviewed-by: Jean-Christophe > --- > drivers/mfd/Kconfig | 10 ++ > drivers/mfd/Makefile | 1 + > drivers/mfd/ab4500-core.c | 207 ++++++++++++++++++++++++++++++++++ > include/linux/mfd/ab4500.h | 262 ++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 480 insertions(+), 0 deletions(-) > create mode 100755 drivers/mfd/ab4500-core.c > create mode 100644 include/linux/mfd/ab4500.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 570be13..4b2c97d 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -305,6 +305,16 @@ config EZX_PCAP > This enables the PCAP ASIC present on EZX Phones. This is > needed for MMC, TouchScreen, Sound, USB, etc.. > > +config AB4500_CORE > + tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" > + depends on SPI > + default y > + help > + Select this option to enable access to AB4500 power management > + chip. This connects to U8500 on the SSP/SPI bus and exports > + read/write functions for the devices to get access to this chip. > + This chip embeds various other multimedia funtionalities as well. > + > endmenu > > menu "Multimedia Capabilities Port drivers" > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index f3b277b..0d98968 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -50,3 +50,4 @@ obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o > obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o > obj-$(CONFIG_AB3100_CORE) += ab3100-core.o > obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o > +obj-$(CONFIG_AB4500_CORE) += ab4500-core.o > diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c > new file mode 100755 > index 0000000..3ad91f7 > --- /dev/null > +++ b/drivers/mfd/ab4500-core.c > @@ -0,0 +1,207 @@ > +/* > + * Copyright (C) 2009 ST-Ericsson > + * > + * Author: Srinidhi KASAGAR > + * > + * This program is free software; you can redistribute it > + * and/or modify it under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation. > + * > + * AB4500 is a companion power management chip used with U8500. > + * On this platform, this is interfaced with SSP0 controller > + * which is a ARM primecell pl022. > + * > + * At the moment the module just exports read/write features. > + * Interrupt management to be added - TODO. > + */ > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* just required if probe fails, we need to > + * unregister the device > + */ > +static struct spi_driver ab4500_driver; > + > +/* > + * This funtion writes to any AB4500 registers using > + * SPI protocol & before it writes it packs the data > + * in the below 24 bit frame format > + * > + * *|------------------------------------| > + * *| 23|22...18|17.......10|9|8|7......0| > + * *| r/w bank adr data | > + * * ------------------------------------ > + * > + * This function shouldn't be called from interrupt > + * context > + */ > +int ab4500_write(struct ab4500 *ab4500, unsigned char block, > + unsigned long addr, unsigned char data) > +{ > + struct spi_transfer xfer; > + struct spi_message msg; > + int err; > + unsigned long spi_data = > + block << 18 | addr << 10 | data; > + > + mutex_lock(&ab4500->lock); > + ab4500->tx_buf[0] = spi_data; > + ab4500->rx_buf[0] = 0; > + > + xfer.tx_buf = ab4500->tx_buf; > + xfer.rx_buf = NULL; > + xfer.len = sizeof(unsigned long); > + > + spi_message_init(&msg); > + spi_message_add_tail(&xfer, &msg); > + > + err = spi_sync(ab4500->spi, &msg); > + mutex_unlock(&ab4500->lock); > + > + return err; > +} > +EXPORT_SYMBOL(ab4500_write); > + > +int ab4500_read(struct ab4500 *ab4500, unsigned char block, > + unsigned long addr) > +{ > + struct spi_transfer xfer; > + struct spi_message msg; > + unsigned long spi_data = > + 1 << 23 | block << 18 | addr << 10; > + > + mutex_lock(&ab4500->lock); > + ab4500->tx_buf[0] = spi_data; > + ab4500->rx_buf[0] = 0; > + > + xfer.tx_buf = ab4500->tx_buf; > + xfer.rx_buf = ab4500->rx_buf; > + xfer.len = sizeof(unsigned long); > + > + spi_message_init(&msg); > + spi_message_add_tail(&xfer, &msg); > + > + spi_sync(ab4500->spi, &msg); > + mutex_unlock(&ab4500->lock); > + > + return ab4500->rx_buf[0]; > +} > +EXPORT_SYMBOL(ab4500_read); > + > +/* ref: ab3100 core */ > +#define AB4500_DEVICE(devname, devid) \ > +static struct platform_device ab4500_##devname##_device = { \ > + .name = devid, \ > + .id = -1, \ > +} > + > +/* list of childern devices of ab4500 - all are > + * not populated here - TODO > + */ > +AB4500_DEVICE(charger, "ab4500-charger"); > +AB4500_DEVICE(audio, "ab4500-audio"); > +AB4500_DEVICE(usb, "ab4500-usb"); > +AB4500_DEVICE(tvout, "ab4500-tvout"); > +AB4500_DEVICE(sim, "ab4500-sim"); > +AB4500_DEVICE(gpadc, "ab4500-gpadc"); > +AB4500_DEVICE(clkmgt, "ab4500-clkmgt"); > +AB4500_DEVICE(misc, "ab4500-misc"); > + > +static struct platform_device *ab4500_platform_devs[] = { > + &ab4500_charger_device, > + &ab4500_audio_device, > + &ab4500_usb_device, > + &ab4500_tvout_device, > + &ab4500_sim_device, > + &ab4500_gpadc_device, > + &ab4500_clkmgt_device, > + &ab4500_misc_device, > +}; > + > +static int __init ab4500_probe(struct spi_device *spi) > +{ > + struct ab4500 *ab4500; > + unsigned char revision; > + int err = 0; > + int i; > + > + ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL); > + if (!ab4500) { > + dev_err(&spi->dev, "could not allocate AB4500\n"); > + err = -ENOMEM; > + goto not_detect; > + } > + > + ab4500->spi = spi; > + spi_set_drvdata(spi, ab4500); > + > + mutex_init(&ab4500->lock); > + > + /* read the revision register */ > + revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG); > + > + /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */ > + if (revision == 0x0 || revision == 0x10) > + dev_info(&spi->dev, "Detected chip: %s, revision = %x\n", > + ab4500_driver.driver.name, revision); > + else { > + dev_err(&spi->dev, "unknown chip: 0x%x\n", revision); > + goto not_detect; > + } > + > + for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) { > + ab4500_platform_devs[i]->dev.parent = > + &spi->dev; > + platform_set_drvdata(ab4500_platform_devs[i], ab4500); > + } > + > + /* register the ab4500 platform devices */ > + platform_add_devices(ab4500_platform_devs, > + ARRAY_SIZE(ab4500_platform_devs)); > + > + return err; > + > + not_detect: > + spi_unregister_driver(&ab4500_driver); > + kfree(ab4500); > + return err; > +} > + > +static int __devexit ab4500_remove(struct spi_device *spi) > +{ > + struct ab4500 *ab4500 = > + spi_get_drvdata(spi); > + > + kfree(ab4500); > + > + return 0; > +} > + > +static struct spi_driver ab4500_driver = { > + .driver = { > + .name = "ab4500", > + .owner = THIS_MODULE, > + }, > + .probe = ab4500_probe, > + .remove = __devexit_p(ab4500_remove) > +}; > + > +static int __devinit ab4500_init(void) > +{ > + return spi_register_driver(&ab4500_driver); > +} > + > +static void __exit ab4500_exit(void) > +{ > + spi_unregister_driver(&ab4500_driver); > +} > + > +subsys_initcall_sync(ab4500_init); > + > +MODULE_AUTHOR("Srinidhi KASAGAR +MODULE_DESCRIPTION("AB4500 core driver"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h > new file mode 100644 > index 0000000..a42a703 > --- /dev/null > +++ b/include/linux/mfd/ab4500.h > @@ -0,0 +1,262 @@ > +/* > + * Copyright (C) 2009 ST-Ericsson > + * > + * Author: Srinidhi KASAGAR > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2, as > + * published by the Free Software Foundation. > + * > + * AB4500 device core funtions, for client access > + */ > +#ifndef MFD_AB4500_H > +#define MFD_AB4500_H > + > +#include > + > +/* > + * AB4500 bank addresses > + */ > +#define AB4500_SYS_CTRL1_BLOCK 0x1 > +#define AB4500_SYS_CTRL2_BLOCK 0x2 > +#define AB4500_REGU_CTRL1 0x3 > +#define AB4500_REGU_CTRL2 0x4 > +#define AB4500_USB 0x5 > +#define AB4500_TVOUT 0x6 > +#define AB4500_DBI 0x7 > +#define AB4500_ECI_AV_ACC 0x8 > +#define AB4500_RESERVED 0x9 > +#define AB4500_GPADC 0xA > +#define AB4500_CHARGER 0xB > +#define AB4500_GAS_GAUGE 0xC > +#define AB4500_AUDIO 0xD > +#define AB4500_INTERRUPT 0xE > +#define AB4500_RTC 0xF > +#define AB4500_MISC 0x10 > +#define AB4500_DEBUG 0x12 > +#define AB4500_PROD_TEST 0x13 > +#define AB4500_OTP_EMUL 0x15 > + > +/* > + * System control 1 register offsets. > + * Bank = 0x01 > + */ > +#define AB4500_TURNON_STAT_REG 0x0100 > +#define AB4500_RESET_STAT_REG 0x0101 > +#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102 > + > +#define AB4500_FSM_STAT1_REG 0x0140 > +#define AB4500_FSM_STAT2_REG 0x0141 > +#define AB4500_SYSCLK_REQ_STAT_REG 0x0142 > +#define AB4500_USB_STAT1_REG 0x0143 > +#define AB4500_USB_STAT2_REG 0x0144 > +#define AB4500_STATUS_SPARE1_REG 0x0145 > +#define AB4500_STATUS_SPARE2_REG 0x0146 > + > +#define AB4500_CTRL1_REG 0x0180 > +#define AB4500_CTRL2_REG 0x0181 > + > +/* > + * System control 2 register offsets. > + * bank = 0x02 > + */ > +#define AB4500_CTRL3_REG 0x0200 > +#define AB4500_MAIN_WDOG_CTRL_REG 0x0201 > +#define AB4500_MAIN_WDOG_TIMER_REG 0x0202 > +#define AB4500_LOW_BAT_REG 0x0203 > +#define AB4500_BATT_OK_REG 0x0204 > +#define AB4500_SYSCLK_TIMER_REG 0x0205 > +#define AB4500_SMPSCLK_CTRL_REG 0x0206 > +#define AB4500_SMPSCLK_SEL1_REG 0x0207 > +#define AB4500_SMPSCLK_SEL2_REG 0x0208 > +#define AB4500_SMPSCLK_SEL3_REG 0x0209 > +#define AB4500_SYSULPCLK_CONF_REG 0x020A > +#define AB4500_SYSULPCLK_CTRL1_REG 0x020B > +#define AB4500_SYSCLK_CTRL_REG 0x020C > +#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D > +#define AB4500_SYSCLK_REQ_VALID_REG 0x020E > +#define AB4500_SYSCTRL_SPARE_REG 0x020F > +#define AB4500_PAD_CONF_REG 0x0210 > + > +/* > + * Regu control1 register offsets > + * Bank = 0x03 > + */ > +#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300 > +#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301 > +#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302 > +#define AB4500_REGU_REQ_CTRL1_REG 0x0303 > +#define AB4500_REGU_REQ_CTRL2_REG 0x0304 > +#define AB4500_REGU_REQ_CTRL3_REG 0x0305 > +#define AB4500_REGU_REQ_CTRL4_REG 0x0306 > +#define AB4500_REGU_MISC1_REG 0x0380 > +#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381 > +#define AB4500_REGU_VUSB_CTRL_REG 0x0382 > +#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383 > +#define AB4500_REGU_CTRL1_SPARE_REG 0x0384 > + > +/* > + * Regu control2 Vmod register offsets > + */ > +#define AB4500_REGU_VMOD_REGU_REG 0x0440 > +#define AB4500_REGU_VMOD_SEL1_REG 0x0441 > +#define AB4500_REGU_VMOD_SEL2_REG 0x0442 > +#define AB4500_REGU_CTRL_DISCH_REG 0x0443 > +#define AB4500_REGU_CTRL_DISCH2_REG 0x0444 > + > +/* > + * USB/ULPI register offsets > + * Bank : 0x5 > + */ > +#define AB4500_USB_LINE_STAT_REG 0x0580 > +#define AB4500_USB_LINE_CTRL1_REG 0x0581 > +#define AB4500_USB_LINE_CTRL2_REG 0x0582 > +#define AB4500_USB_LINE_CTRL3_REG 0x0583 > +#define AB4500_USB_LINE_CTRL4_REG 0x0584 > +#define AB4500_USB_LINE_CTRL5_REG 0x0585 > +#define AB4500_USB_OTG_CTRL_REG 0x0587 > +#define AB4500_USB_OTG_STAT_REG 0x0588 > +#define AB4500_USB_OTG_STAT_REG 0x0588 > +#define AB4500_USB_CTRL_SPARE_REG 0x0589 > +#define AB4500_USB_PHY_CTRL_REG 0x058A > + > +/* > + * TVOUT / CTRL register offsets > + * Bank : 0x06 > + */ > +#define AB4500_TVOUT_CTRL_REG 0x0680 > + > +/* > + * DBI register offsets > + * Bank : 0x07 > + */ > +#define AB4500_DBI_REG1_REG 0x0700 > +#define AB4500_DBI_REG2_REG 0x0701 > + > +/* > + * ECI regsiter offsets > + * Bank : 0x08 > + */ > +#define AB4500_ECI_CTRL_REG 0x0800 > +#define AB4500_ECI_HOOKLEVEL_REG 0x0801 > +#define AB4500_ECI_DATAOUT_REG 0x0802 > +#define AB4500_ECI_DATAIN_REG 0x0803 > + > +/* > + * AV Connector register offsets > + * Bank : 0x08 > + */ > +#define AB4500_AV_CONN_REG 0x0840 > + > +/* > + * Accessory detection register offsets > + * Bank : 0x08 > + */ > +#define AB4500_ACC_DET_DB1_REG 0x0880 > +#define AB4500_ACC_DET_DB2_REG 0x0881 > + > +/* > + * GPADC register offsets > + * Bank : 0x0A > + */ > +#define AB4500_GPADC_CTRL1_REG 0x0A00 > +#define AB4500_GPADC_CTRL2_REG 0x0A01 > +#define AB4500_GPADC_CTRL3_REG 0x0A02 > +#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03 > +#define AB4500_GPADC_STAT_REG 0x0A04 > +#define AB4500_GPADC_MANDATAL_REG 0x0A05 > +#define AB4500_GPADC_MANDATAH_REG 0x0A06 > +#define AB4500_GPADC_AUTODATAL_REG 0x0A07 > +#define AB4500_GPADC_AUTODATAH_REG 0x0A08 > +#define AB4500_GPADC_MUX_CTRL_REG 0x0A09 > + > +/* > + * Charger / status register offfsets > + * Bank : 0x0B > + */ > +#define AB4500_CH_STATUS1_REG 0x0B00 > +#define AB4500_CH_STATUS2_REG 0x0B01 > +#define AB4500_CH_USBCH_STAT1_REG 0x0B02 > +#define AB4500_CH_USBCH_STAT2_REG 0x0B03 > +#define AB4500_CH_FSM_STAT_REG 0x0B04 > +#define AB4500_CH_STAT_REG 0x0B05 > + > +/* > + * Charger / control register offfsets > + * Bank : 0x0B > + */ > +#define AB4500_CH_VOLT_LVL_REG 0x0B40 > + > +/* > + * Charger / main control register offfsets > + * Bank : 0x0B > + */ > +#define AB4500_MCH_CTRL1 0x0B80 > +#define AB4500_MCH_CTRL2 0x0B81 > +#define AB4500_MCH_IPT_CURLVL_REG 0x0B82 > +#define AB4500_CH_WD_REG 0x0B83 > + > +/* > + * Charger / USB control register offsets > + * Bank : 0x0B > + */ > +#define AB4500_USBCH_CTRL1_REG 0x0BC0 > +#define AB4500_USBCH_CTRL2_REG 0x0BC1 > +#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2 > + > +/* > + * RTC bank register offsets > + * Bank : 0xF > + */ > +#define AB4500_RTC_SOFF_STAT_REG 0x0F00 > +#define AB4500_RTC_CC_CONF_REG 0x0F01 > +#define AB4500_RTC_READ_REQ_REG 0x0F02 > +#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03 > +#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04 > +#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05 > +#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06 > +#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07 > +#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08 > +#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09 > +#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A > +#define AB4500_RTC_STAT_REG 0x0F0B > +#define AB4500_RTC_BKUP_CHG_REG 0x0F0C > +#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D > +#define AB4500_RTC_CALIB_REG 0x0F0E > +#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F > + > +/* > + * PWM Out generators > + * Bank: 0x10 > + */ > +#define AB4500_PWM_OUT_CTRL1_REG 0x1060 > +#define AB4500_PWM_OUT_CTRL2_REG 0x1061 > +#define AB4500_PWM_OUT_CTRL3_REG 0x1062 > +#define AB4500_PWM_OUT_CTRL4_REG 0x1063 > +#define AB4500_PWM_OUT_CTRL5_REG 0x1064 > +#define AB4500_PWM_OUT_CTRL6_REG 0x1065 > +#define AB4500_PWM_OUT_CTRL7_REG 0x1066 > + > +#define AB4500_I2C_PAD_CTRL_REG 0x1067 > +#define AB4500_REV_REG 0x1080 > + > +/** > + * struct ab4500 > + * @spi: spi device structure > + * @tx_buf: transmit buffer > + * @rx_buf: receive buffer > + * @lock: sync primitive > + */ > +struct ab4500 { > + struct spi_device *spi; > + unsigned long tx_buf[4]; > + unsigned long rx_buf[4]; > + struct mutex lock; > +}; > + > +int ab4500_write(struct ab4500 *ab4500, unsigned char block, > + unsigned long addr, unsigned char data); > +int ab4500_read(struct ab4500 *ab4500, unsigned char block, > + unsigned long addr); > + > +#endif /* MFD_AB4500_H */ > -- > 1.6.3.GIT > > > -- Intel Open Source Technology Centre http://oss.intel.com/