From: baruch@tkos.co.il (Baruch Siach)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC] i2c-designware patches
Date: Tue, 13 Oct 2009 09:04:12 +0200 [thread overview]
Message-ID: <20091013070412.GA9739@jasper.tkos.co.il> (raw)
In-Reply-To: <4AD3E974.8080200@necel.com>
Hi Shinya,
On Tue, Oct 13, 2009 at 11:44:04AM +0900, Shinya Kuribayashi wrote:
> Here're various improvements / bug-fixing patches for DW I2C driver.
> I'm working with v2.6.27-based kernel, but they must work fine with the
> latest mainline kernel.
>
> It's stil in RFC, and I'm working with it for some time. Any comments
> or suggestions are highly appreciated. Then I'll respin and give it a
> test, thanks.
>
> Baruch, I'd say the base driver is in good shape enogh, so I'm having
> a fun with modifing the driver. Thanks for the initial work.
Thanks. It is good to see that my work is actually useful for someone. I'll go
over this series in the coming days. Unfortunately I don't have the hardware
for testing anymore, but I'll try at least to compile test these patches.
By the way, what is the chip you work with?
baruch
> P.S. ARM and MIPS lists are Cc:ed as I believe there must be potential
> users of this driver.
>
>
> Shinya Kuribayashi (16):
> i2c-designware: Consolidate to use 32-bit word accesses
> i2c-designware: Don't use the IC_CLR_INTR register to clear interrupts
> i2c-designware: Use platform_get_irq helper
> i2c-designware: i2c_dw_read: Take "struct dw_i2c_dev" pointer
> i2c-designware: i2c_dw_xfer_msg: Take "struct dw_i2c_dev" pointer
> i2c-designware: Remove an useless local variable "num"
> i2c-designware: Set a clock name to DesignWare I2C clock source
> i2c-designware: Improve _HCNT/_LCNT calculation
> i2c-designware: i2c_dw_xfer_msg: Fix an i2c_msg search bug
> i2c-designware: Do dw_i2c_pump_msg's jobs in the interrutp handler
> i2c-designware: Set Tx/Rx FIFO threshold levels
> i2c-designware: Divide i2c_dw_xfer_msg into two functions
> i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer
> i2c-designware: Deferred FIFO-data-counting variables initialization
> i2c-designware: i2c_dw_xfer_msg: Mark as completed on an error
> i2c-designware: Add I2C_FUNC_SMBUS_* bits
>
> drivers/i2c/busses/i2c-designware.c | 367 +++++++++++++++++++++++++----------
> 1 files changed, 264 insertions(+), 103 deletions(-)
>
> --
> Shinya Kuribayashi
> NEC Electronics
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
next prev parent reply other threads:[~2009-10-13 7:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-13 2:44 [RFC] i2c-designware patches Shinya Kuribayashi
2009-10-13 2:48 ` [PATCH 01/16] i2c-designware: Consolidate to use 32-bit word accesses Shinya Kuribayashi
2009-10-13 2:48 ` [PATCH 02/16] i2c-designware: Don't use the IC_CLR_INTR register to clear interrupts Shinya Kuribayashi
2009-10-13 2:49 ` [PATCH 03/16] i2c-designware: Use platform_get_irq helper Shinya Kuribayashi
2009-10-13 2:49 ` [PATCH 04/16] i2c-designware: i2c_dw_read: Take "struct dw_i2c_dev" pointer Shinya Kuribayashi
2009-10-13 2:50 ` [PATCH 05/16] i2c-designware: i2c_dw_xfer_msg: " Shinya Kuribayashi
2009-10-13 2:50 ` [PATCH 06/16] i2c-designware: Remove an useless local variable "num" Shinya Kuribayashi
2009-10-13 2:50 ` [PATCH 07/16] i2c-designware: Set a clock name to DesignWare I2C clock source Shinya Kuribayashi
2009-10-13 9:54 ` Mark Brown
2009-10-14 4:19 ` Shinya Kuribayashi
2009-10-13 22:41 ` Ben Dooks
2009-10-14 4:19 ` Shinya Kuribayashi
2009-10-14 10:09 ` Mark Brown
2009-10-14 19:14 ` Russell King - ARM Linux
2009-10-15 3:37 ` Shinya Kuribayashi
2009-10-13 2:51 ` [PATCH 08/16] i2c-designware: Improve _HCNT/_LCNT calculation Shinya Kuribayashi
2009-10-13 2:51 ` [PATCH 09/16] i2c-designware: i2c_dw_xfer_msg: Fix an i2c_msg search bug Shinya Kuribayashi
2009-10-13 2:52 ` [PATCH 10/16] i2c-designware: Do dw_i2c_pump_msg's jobs in the interrutp handler Shinya Kuribayashi
2009-10-13 2:52 ` [PATCH 11/16] i2c-designware: Set Tx/Rx FIFO threshold levels Shinya Kuribayashi
2009-10-13 2:52 ` [PATCH 12/16] i2c-designware: Divide i2c_dw_xfer_msg into two functions Shinya Kuribayashi
2009-10-13 2:53 ` [PATCH 13/16] i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer Shinya Kuribayashi
2009-10-13 2:53 ` [PATCH 14/16] i2c-designware: Deferred FIFO-data-counting variables initialization Shinya Kuribayashi
2009-10-13 2:53 ` [PATCH 15/16] i2c-designware: i2c_dw_xfer_msg: Mark as completed on an error Shinya Kuribayashi
2009-10-15 5:29 ` Shinya Kuribayashi
2009-10-13 2:54 ` [PATCH 16/16] i2c-designware: Add I2C_FUNC_SMBUS_* bits Shinya Kuribayashi
2009-10-14 18:53 ` Baruch Siach
2009-10-15 3:22 ` Shinya Kuribayashi
2009-10-13 7:04 ` Baruch Siach [this message]
2009-10-13 8:01 ` [RFC] i2c-designware patches Shinya Kuribayashi
2009-10-14 19:02 ` Baruch Siach
2009-10-19 1:23 ` Shinya Kuribayashi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091013070412.GA9739@jasper.tkos.co.il \
--to=baruch@tkos.co.il \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).