From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/27] OMAP3: PM: handle PER/NEON/CORE in idle
Date: Wed, 14 Oct 2009 15:18:53 -0700 [thread overview]
Message-ID: <20091014221852.GP12700@atomide.com> (raw)
In-Reply-To: <1255557490-16787-9-git-send-email-khilman@deeprootsystems.com>
* Kevin Hilman <khilman@deeprootsystems.com> [091014 15:15]:
> From: Rajendra Nayak <rnayak@ti.com>
Might be worth checking the descriptions in the whole series :)
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> ---
> arch/arm/mach-omap2/pm34xx.c | 64 +++++++++++++++++++++++++++++++++++------
> 1 files changed, 54 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 9dbb5a0..7eab539 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -49,7 +49,10 @@ static LIST_HEAD(pwrst_list);
>
> static void (*_omap_sram_idle)(u32 *addr, int save_state);
>
> -static struct powerdomain *mpu_pwrdm;
> +static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
> +static struct powerdomain *core_pwrdm, *per_pwrdm;
> +
> +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
>
> /*
> * PRCM Interrupt Handler Helper Function
> @@ -169,13 +172,22 @@ static void omap_sram_idle(void)
> /* save_state = 1 => Only L1 and logic lost */
> /* save_state = 2 => Only L2 lost */
> /* save_state = 3 => L1, L2 and logic lost */
> - int save_state = 0, mpu_next_state;
> + int save_state = 0;
> + int mpu_next_state = PWRDM_POWER_ON;
> + int per_next_state = PWRDM_POWER_ON;
> + int core_next_state = PWRDM_POWER_ON;
>
> if (!_omap_sram_idle)
> return;
>
> + pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
> + pwrdm_clear_all_prev_pwrst(neon_pwrdm);
> + pwrdm_clear_all_prev_pwrst(core_pwrdm);
> + pwrdm_clear_all_prev_pwrst(per_pwrdm);
> +
> mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
> switch (mpu_next_state) {
> + case PWRDM_POWER_ON:
> case PWRDM_POWER_RET:
> /* No need to save context */
> save_state = 0;
> @@ -187,18 +199,37 @@ static void omap_sram_idle(void)
> }
> pwrdm_pre_transition();
>
> - omap2_gpio_prepare_for_retention();
> - omap_uart_prepare_idle(0);
> - omap_uart_prepare_idle(1);
> - omap_uart_prepare_idle(2);
> + /* NEON control */
> + if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
> + set_pwrdm_state(neon_pwrdm, mpu_next_state);
> +
> + /* CORE & PER */
> + core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
> + if (core_next_state < PWRDM_POWER_ON) {
> + omap2_gpio_prepare_for_retention();
> + omap_uart_prepare_idle(0);
> + omap_uart_prepare_idle(1);
> + /* PER changes only with core */
> + per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
> + if (per_next_state < PWRDM_POWER_ON)
> + omap_uart_prepare_idle(2);
> + /* Enable IO-PAD wakeup */
> + prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
> + }
>
> _omap_sram_idle(NULL, save_state);
> cpu_init();
>
> - omap_uart_resume_idle(2);
> - omap_uart_resume_idle(1);
> - omap_uart_resume_idle(0);
> - omap2_gpio_resume_after_retention();
> + if (core_next_state < PWRDM_POWER_ON) {
> + if (per_next_state < PWRDM_POWER_ON)
> + omap_uart_resume_idle(2);
> + omap_uart_resume_idle(1);
> + omap_uart_resume_idle(0);
> +
> + /* Disable IO-PAD wakeup */
> + prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
> + omap2_gpio_resume_after_retention();
> + }
>
> pwrdm_post_transition();
>
> @@ -791,6 +822,10 @@ static int __init omap3_pm_init(void)
> goto err2;
> }
>
> + neon_pwrdm = pwrdm_lookup("neon_pwrdm");
> + per_pwrdm = pwrdm_lookup("per_pwrdm");
> + core_pwrdm = pwrdm_lookup("core_pwrdm");
> +
> omap_push_sram_idle();
> #ifdef CONFIG_SUSPEND
> suspend_set_ops(&omap_pm_ops);
> @@ -798,6 +833,15 @@ static int __init omap3_pm_init(void)
>
> pm_idle = omap3_pm_idle;
>
> + pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
> + /*
> + * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
> + * IO-pad wakeup. Otherwise it will unnecessarily waste power
> + * waking up PER with every CORE wakeup - see
> + * http://marc.info/?l=linux-omap&m=121852150710062&w=2
> + */
> + pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
> +
> err1:
> return ret;
> err2:
> --
> 1.6.4.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2009-10-14 22:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-14 21:57 [PATCH 00/27] OMAP3: PM: base off-mode support Kevin Hilman
2009-10-14 21:57 ` [PATCH 01/27] OMAP3: PM: GPMC context save/restore Kevin Hilman
2009-10-14 21:57 ` [PATCH 02/27] OMAP3: PM: GPIO " Kevin Hilman
2009-10-14 21:57 ` [PATCH 03/27] OMAP3: PM: INTC " Kevin Hilman
2009-10-14 21:57 ` [PATCH 04/27] OMAP3: PM: PRCM " Kevin Hilman
2009-10-14 21:57 ` [PATCH 05/27] OMAP3: PM: Populate scratchpad contents Kevin Hilman
2009-10-14 21:57 ` [PATCH 06/27] OMAP3: PM: SCM context save/restore Kevin Hilman
2009-10-14 21:57 ` [PATCH 07/27] OMAP3: PM: SRAM restore function Kevin Hilman
2009-10-14 21:57 ` [PATCH 08/27] OMAP3: PM: handle PER/NEON/CORE in idle Kevin Hilman
2009-10-14 21:57 ` [PATCH 09/27] OMAP3: PM: Restore MMU table entry Kevin Hilman
2009-10-14 21:57 ` [PATCH 10/27] OMAP3: PM: MPU off-mode support Kevin Hilman
2009-10-14 21:57 ` [PATCH 11/27] OMAP3: PM: CORE domain " Kevin Hilman
2009-10-14 21:57 ` [PATCH 12/27] OMAP: PM: DMA context save/restore for " Kevin Hilman
2009-10-14 21:57 ` [PATCH 13/27] OMAP3 PM: off-mode support for HS/EMU devices Kevin Hilman
2009-10-14 21:57 ` [PATCH 14/27] OMAP3: PM: save secure RAM only during init Kevin Hilman
2009-10-14 21:57 ` [PATCH 15/27] OMAP3: PM: Enable SDRAM auto-refresh during sleep Kevin Hilman
2009-10-14 21:57 ` [PATCH 16/27] OMAP3: PM: Save and restore also CM_CLKSEL1_PLL_IVA2 Kevin Hilman
2009-10-14 21:58 ` [PATCH 17/27] OMAP3: PM: Fix secure SRAM context save/restore Kevin Hilman
2009-10-14 21:58 ` [PATCH 18/27] ARM: OMAP: Add missing SMS_SYSCONFIG save/restore Kevin Hilman
2009-10-14 21:58 ` [PATCH 19/27] OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpad Kevin Hilman
2009-10-14 21:58 ` [PATCH 20/27] OMAP: PM: Clear DMA channel state after a wakeup Kevin Hilman
2009-10-14 21:58 ` [PATCH 21/27] OMAP: Store reboot mode in scratchpad on OMAP34xx Kevin Hilman
2009-10-14 21:58 ` [PATCH 22/27] OMAP3: PM: SDRC auto-refresh workaround for off-mode Kevin Hilman
2009-10-14 21:58 ` [PATCH 23/27] OMAP3: PM: Fix INTC context save/restore Kevin Hilman
2009-10-14 21:58 ` [PATCH 24/27] PM: Disable usb host HW save and restore Kevin Hilman
2009-10-14 21:58 ` [PATCH 25/27] OMAP3: PM: Wait for SDRC ready iso a blind delay Kevin Hilman
2009-10-14 21:58 ` [PATCH 26/27] OMAP3: PM debug: allow runtime toggle of PM features Kevin Hilman
2009-10-14 21:58 ` [PATCH 27/27] PM debug: allow configurable wakeup from suspend on OMAP GPtimer Kevin Hilman
2009-10-14 22:18 ` Tony Lindgren [this message]
2009-10-14 22:17 ` [PATCH 07/27] OMAP3: PM: SRAM restore function Tony Lindgren
2009-10-14 22:15 ` [PATCH 03/27] OMAP3: PM: INTC context save/restore Tony Lindgren
2009-10-14 22:13 ` [PATCH 02/27] OMAP3: PM: GPIO " Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091014221852.GP12700@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).