From mboxrd@z Thu Jan 1 00:00:00 1970 From: cbouatmailru@gmail.com (Anton Vorontsov) Date: Thu, 15 Oct 2009 20:51:17 +0400 Subject: [RFC] Re-order of PXA-based platforms in Kconfig and Makefile In-Reply-To: References: Message-ID: <20091015165117.GA23632@oksana.dev.rtsoft.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Oct 11, 2009 at 12:01:19AM +0800, Eric Miao wrote: > All, > > I've listed almost all the PXA based platforms currently existing in mainline > kernel as below. Due to the naming mess in Kconfig and Makefile, I'd like to > get them sorted in the following order: > > 1. By category: > Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed > by end-user products (this is to ensure the commonly referenced platforms > will appear first) > > 2. By vendor name in alphabetic within each category > (this is to ensure code reuse and similar platforms can be grouped as > much as possible) > > Patch is attached, and any problems, please let me know. > > - eric > > Vendor Board Name Processor Maintaneance Status [...] > HP HX4700 PXA27x Philipp Zabel > HP H5000 PXA27x Unknown (initial submission by: > Anton Vorontsov > Milan Plzik ) I still have the H5000 (as well as HX4700) machine, and I'm still interested in it. The active development/mainlining suspended a bit, but I hope to get to it soon (heh). The latest version of the patch looks good, thanks! -- Anton Vorontsov email: cbouatmailru at gmail.com irc://irc.freenode.net/bd2