From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
Date: Fri, 16 Oct 2009 16:41:38 -0700 [thread overview]
Message-ID: <20091016234138.2463.38350.stgit@localhost> (raw)
In-Reply-To: <20091016233624.2463.26653.stgit@localhost>
Use ioremap for omap4 L4 code
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-4430sdp.c | 13 ++++++++++--
arch/arm/mach-omap2/omap-smp.c | 28 ++++++++++++++++++++-----
arch/arm/mach-omap2/timer-gp.c | 3 ++-
arch/arm/plat-omap/include/mach/entry-macro.S | 2 ++
arch/arm/plat-omap/include/mach/omap44xx.h | 5 ----
5 files changed, 37 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40..2a7b901 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
static void __init gic_init_irq(void)
{
- gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+ void __iomem *base;
+
+ /* Static mapping, never released */
+ base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+ BUG_ON(!base);
+ gic_dist_init(0, base, 29);
+
+ /* Static mapping, never released */
+ base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
+ BUG_ON(!base);
+ gic_cpu_init(0, OMAP44XX_GIC_CPU_BASE);
}
static void __init omap_4430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 48ee295..a1b618c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -26,11 +26,11 @@
#include <mach/hardware.h>
/* Registers used for communicating startup information */
-#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
-#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+static void __iomem *omap4_auxcoreboot_reg0;
+static void __iomem *omap4_auxcoreboot_reg1;
/* SCU base address */
-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+static void __iomem *scu_base;
/*
* Use SCU config register to count number of cores
@@ -46,6 +46,8 @@ static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
+ void __iomem *gic_cpu_base;
+
trace_hardirqs_off();
/*
@@ -54,7 +56,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* for us: do so
*/
- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+ /* Static mapping, never released */
+ gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
+ BUG_ON(!gic_cpu_base);
+ gic_cpu_init(0, gic_cpu_base);
/*
* Synchronise with the boot thread.
@@ -79,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
- __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+ __raw_writel(cpu, omap4_auxcoreboot_reg1);
smp_wmb();
timeout = jiffies + (1 * HZ);
@@ -104,7 +109,7 @@ static void __init wakeup_secondary(void)
* A barrier is added to ensure that write buffer is drained
*/
__raw_writel(virt_to_phys(omap_secondary_startup), \
- OMAP4_AUXCOREBOOT_REG0);
+ omap4_auxcoreboot_reg0);
smp_wmb();
/*
@@ -130,6 +135,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = get_core_count();
unsigned int cpu = smp_processor_id();
+ void __iomem *omap4_wkupgen_base;
int i;
/* sanity check */
@@ -161,6 +167,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
+ /* Never released */
+ omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+ BUG_ON(!omap4_wkupgen_base);
+ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
+ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x804;
+
+ /* Never released */
+ scu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
+ BUG_ON(!scu_base);
+
if (max_cpus > 1) {
/*
* Enable the local timer or broadcast device for the
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e2338c0..cd72970 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void)
static void __init omap2_gp_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
- twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+ twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+ BUG_ON(!twd_base);
#endif
omap_dm_timer_init();
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index abe0864..3bad928 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -104,6 +104,8 @@
.endm
#else
+#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index b3ba5ac..8b4a578 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,9 @@
#define IRQ_SIR_IRQ 0x0040
#define OMAP44XX_GIC_DIST_BASE 0x48241000
#define OMAP44XX_GIC_CPU_BASE 0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_SCU_BASE 0x48240000
-#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
-#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
#define OMAP44XX_WKUPGEN_BASE 0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#endif /* __ASM_ARCH_OMAP44XX_H */
next prev parent reply other threads:[~2009-10-16 23:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-16 23:40 [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space Tony Lindgren
2009-10-16 23:40 ` [PATCH 01/14] omap: Change low-level serial init to use ioremap Tony Lindgren
2009-10-16 23:40 ` [PATCH 02/14] omap: Use ioremap in irq.c Tony Lindgren
2009-10-16 23:40 ` [PATCH 03/14] omap: Use ioremap in dma.c Tony Lindgren
2009-10-16 23:40 ` [PATCH 04/14] omap: Use ioremap in dmtimer.c Tony Lindgren
2009-10-16 23:41 ` [PATCH 05/14] omap: Use ioremap in gpio.c Tony Lindgren
2009-10-17 8:10 ` Russell King - ARM Linux
2009-10-17 16:13 ` Tony Lindgren
2009-10-19 0:19 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 06/14] omap: Use ioremap in omap_hwmod.c Tony Lindgren
2009-10-16 23:41 ` [PATCH 07/14] omap: Use getnstimeofday for omap_device Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren [this message]
2009-10-16 23:46 ` [PATCH 08/14] omap: Use ioremap for omap4 L4 code Tony Lindgren
2009-10-17 10:48 ` Shilimkar, Santosh
2009-10-17 16:19 ` Tony Lindgren
2009-10-19 0:24 ` Tony Lindgren
2009-10-19 7:27 ` Shilimkar, Santosh
2009-10-19 17:12 ` Tony Lindgren
2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 17:38 ` Tony Lindgren
2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto
2009-10-20 6:34 ` Shilimkar, Santosh
2009-10-16 23:41 ` [PATCH 09/14] omap: Use ioremap in dispc.c Tony Lindgren
2009-10-16 23:42 ` [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4 Tony Lindgren
2009-10-16 23:42 ` [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space Tony Lindgren
2009-10-20 0:20 ` Tony Lindgren
2009-10-20 6:32 ` Shilimkar, Santosh
2009-10-16 23:42 ` [PATCH 12/14] omap: Move SRAM map to claim more io space Tony Lindgren
2009-10-16 23:42 ` [PATCH 13/14] omap: Fix DEBUG_LL UART io address Tony Lindgren
2009-10-16 23:42 ` [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091016234138.2463.38350.stgit@localhost \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).