linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/10] omap4: Allow omap_serial_early_init() for OMAP4430 board
Date: Thu, 22 Oct 2009 15:13:02 -0700	[thread overview]
Message-ID: <20091022221302.27408.10116.stgit@localhost> (raw)
In-Reply-To: <20091022221013.27408.443.stgit@localhost>

From: Santosh Shilimkar <santosh.shilimkar@ti.com>

This patch enables omap_serial_early_init() function for OMAP4430
SDP. Without this the bootup would throw oops in omap_serial_init().

Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections
to enable omap_serial_early_init(). This ifndef cannot be removed
until omap4 clock framework is implemented.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: Tony Lindgren <tony@atomide.com>
Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |    4 ++--
 arch/arm/mach-omap2/io.c            |    2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40..609a5a4 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad..56be87d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+#endif
 	omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);

  parent reply	other threads:[~2009-10-22 22:13 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-22 22:11 [PATCH 00/10] omap fixes for v2.6.32-rc5 Tony Lindgren
2009-10-22 22:11 ` [PATCH 01/10] omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad Tony Lindgren
2009-10-22 22:11 ` [PATCH 02/10] omap: SDMA: Fix omap_stop_dma() API for channel linking Tony Lindgren
2009-10-22 22:11 ` [PATCH 03/10] omap: iommu: fix wrong condition check for SUPERSECTION Tony Lindgren
2009-10-22 22:12 ` [PATCH 04/10] omap1: Fix redundant UARTs pin muxing that can break other hardware support Tony Lindgren
2009-10-22 22:12 ` [PATCH 05/10] omap1: Fix DSP public peripherals support for ams-delta Tony Lindgren
2009-10-22 23:22   ` Jon Hunter
2009-10-23 19:19     ` Tony Lindgren
2009-10-23 23:11       ` Janusz Krzysztofik
2009-10-22 22:12 ` [PATCH 06/10] omap: Fix detection of n8x0 Tony Lindgren
2009-10-22 22:12 ` [PATCH 07/10] omap2: Fix console serial port number for n8x0 Tony Lindgren
2009-10-22 22:12 ` [PATCH 08/10] omap3: PM: enable UART3 module wakeups Tony Lindgren
2009-10-22 22:13 ` Tony Lindgren [this message]
2009-10-22 22:13 ` [PATCH 10/10] omap4: Fix UART4 platform data on omap4 Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091022221302.27408.10116.stgit@localhost \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).