From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] msm: add minimal board file for HTC Dream device
Date: Mon, 2 Nov 2009 11:49:49 +0100 [thread overview]
Message-ID: <20091102104949.GA23456@elf.ucw.cz> (raw)
This is just enough to get the device booting and serial console
working. Sufficient for debugging further MSM7k/Dream Support.
This will support HTC Dream / T-Mobile G1 / Android ADP1 (which
are all the same hardware, known as "trout" to the ARM machine
database).
Signed-off-by: Brian Swetland <swetland@google.com>
Reviewed-by: GeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/mach-msm/Kconfig | 6 +++
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/board-dream.c | 84 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/board-dream.h | 5 ++
4 files changed, 96 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/board-dream.c
create mode 100644 arch/arm/mach-msm/board-dream.h
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 35f2a90..f780086 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -34,4 +34,10 @@ config MACH_HALIBUT
help
Support for the Qualcomm SURF7201A eval board.
+config MACH_TROUT
+ default y
+ bool "HTC Dream (aka trout)"
+ help
+ Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1aa4700..91e6f5c 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -6,3 +6,4 @@ obj-y += clock.o clock-7x01a.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+obj-$(CONFIG_MACH_TROUT) += board-dream.o
diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c
new file mode 100644
index 0000000..6eae7e3
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.c
@@ -0,0 +1,84 @@
+/* linux/arch/arm/mach-msm/board-dream.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "devices.h"
+#include "board-dream.h"
+
+static struct platform_device *devices[] __initdata = {
+ &msm_device_uart3,
+ &msm_device_smd,
+ &msm_device_nand,
+ &msm_device_hsusb,
+ &msm_device_i2c,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init trout_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init trout_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc trout_io_desc[] __initdata = {
+ {
+ .virtual = TROUT_CPLD_BASE,
+ .pfn = __phys_to_pfn(TROUT_CPLD_START),
+ .length = TROUT_CPLD_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }
+};
+
+static void __init trout_map_io(void)
+{
+ msm_map_common_io();
+ iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
+
+#ifdef CONFIG_MSM_DEBUG_UART3
+ /* route UART3 to the "H2W" extended usb connector */
+ writeb(0x80, TROUT_CPLD_BASE + 0x00);
+#endif
+
+ msm_clock_init();
+}
+
+MACHINE_START(TROUT, "HTC Dream")
+#ifdef CONFIG_MSM_DEBUG_UART
+ .phys_io = MSM_DEBUG_UART_PHYS,
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+ .boot_params = 0x10000100,
+ .map_io = trout_map_io,
+ .init_irq = trout_init_irq,
+ .init_machine = trout_init,
+ .timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h
new file mode 100644
index 0000000..4f345a5
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.h
@@ -0,0 +1,5 @@
+
+#define TROUT_CPLD_BASE 0xE8100000
+#define TROUT_CPLD_START 0x98000000
+#define TROUT_CPLD_SIZE SZ_4K
+
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2009-11-02 10:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-02 10:49 Pavel Machek [this message]
2009-11-16 16:36 ` [PATCH 2/3] msm: add minimal board file for HTC Dream device Russell King - ARM Linux
2009-11-16 16:43 ` Brian Swetland
2009-11-16 16:57 ` Russell King - ARM Linux
2009-11-16 17:07 ` Brian Swetland
2009-11-16 18:56 ` Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091102104949.GA23456@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).