* [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2
@ 2009-12-03 0:21 Tony Lindgren
2009-12-03 0:21 ` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren
` (8 more replies)
0 siblings, 9 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
I've updated this series to only map GPIO pins to mux registers
if CONFIG_OMAP_MUX is not set. Those are needed for dynamic muxing
for off-idle.
I've also added omap36xx support, which I have not been able to
test. People with 36xx boards, please give it a try.
Also fixed several checkpatch.pl warnings.
Again big thanks for Benoit Cousson <b-cousson@ti.com> and
Paul Walmsley <paul@pwsan.com> for help in getting the mux
data generated!
Regards,
Tony
Here are some instructions on how to use:
To see what got muxed during init, edit the kernel
CMDLINE to have debug in it:
# dmesg | grep mux
mux: Setting signal i2c2_scl.i2c2_scl 0x0100 -> 0x0100
mux: Setting signal i2c2_sda.i2c2_sda 0x0100 -> 0x0100
mux: Setting signal i2c3_scl.i2c3_scl 0x0100 -> 0x0100
mux: Setting signal i2c3_sda.i2c3_sda 0x0100 -> 0x0100
mux: Setting signal gpmc_ncs3.gpio54 0x410c -> 0x010c
...
Looks like the gpmc_ncs3.gpio54 muxing in the kernel
has a bug where we should have OMAP_WAKEUP_EN set for
board_smc91x_init for board-rx51? :)
To override bootloader mux settings, edit the kernel CMDLINE:
omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
Note that this only changes the bootloader settings, not
what might be muxed from the board-*.c files.
With CONFIG_DEBUG_FS set:
# mount -t sysfs sys /sys
# mount -t debugfs debug /sys/kernel/debug
# ls /sys/kernel/debug/omap_mux/i2c
i2c2_scl i2c2_sda i2c3_scl i2c3_sda i2c4_scl i2c4_sda
# cat /sys/kernel/debug/omap_mux/i2c2_scl
name: i2c2_scl.i2c2_scl (0x480021be/0x18e = 0x0100), b af15, t NA
mode: OMAP_PIN_INPUT | OMAP_MUX_MODE0
signals: i2c2_scl | NA | NA | NA | gpio_168 | NA | NA | safe_mode
---
Mike Rapoport (1):
omap2: mux: intoduce omap_mux_{read,write}
Tony Lindgren (8):
omap: mux: Add new style pin multiplexing code for omap3
omap: mux: Add new style pin multiplexing data for 34xx
omap: mux: Add new style init functions to omap3 board-*.c files
omap: mux: Add debugfs support for new mux code
omap: Split i2c platform init for mach-omap1 and mach-omap2
omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
omap: mux: Remove old mux code for 34xx
omap: mux: Add 36xx CBP package support
Documentation/kernel-parameters.txt | 5
arch/arm/mach-omap1/Makefile | 3
arch/arm/mach-omap1/i2c.c | 33
arch/arm/mach-omap2/Kconfig | 24
arch/arm/mach-omap2/Makefile | 6
arch/arm/mach-omap2/board-3430sdp.c | 15
arch/arm/mach-omap2/board-3630sdp.c | 14
arch/arm/mach-omap2/board-am3517evm.c | 11
arch/arm/mach-omap2/board-cm-t35.c | 14
arch/arm/mach-omap2/board-igep0020.c | 11
arch/arm/mach-omap2/board-ldp.c | 10
arch/arm/mach-omap2/board-omap3beagle.c | 21
arch/arm/mach-omap2/board-omap3evm.c | 21
arch/arm/mach-omap2/board-omap3pandora.c | 15
arch/arm/mach-omap2/board-overo.c | 14
arch/arm/mach-omap2/board-rx51-peripherals.c | 7
arch/arm/mach-omap2/board-rx51.c | 16
arch/arm/mach-omap2/board-zoom2.c | 10
arch/arm/mach-omap2/board-zoom3.c | 10
arch/arm/mach-omap2/devices.c | 62 +
arch/arm/mach-omap2/i2c.c | 56 +
arch/arm/mach-omap2/io.c | 1
arch/arm/mach-omap2/mux.c | 1061 +++++++++----
arch/arm/mach-omap2/mux.h | 163 ++
arch/arm/mach-omap2/mux34xx.c | 2099 ++++++++++++++++++++++++++
arch/arm/mach-omap2/mux34xx.h | 398 +++++
arch/arm/mach-omap2/usb-ehci.c | 166 +-
arch/arm/plat-omap/i2c.c | 44 -
arch/arm/plat-omap/include/plat/common.h | 14
arch/arm/plat-omap/include/plat/i2c.h | 39
arch/arm/plat-omap/include/plat/mux.h | 226 ---
arch/arm/plat-omap/mux.c | 8
32 files changed, 3850 insertions(+), 747 deletions(-)
create mode 100644 arch/arm/mach-omap1/i2c.c
create mode 100644 arch/arm/mach-omap2/i2c.c
create mode 100644 arch/arm/mach-omap2/mux.h
create mode 100644 arch/arm/mach-omap2/mux34xx.c
create mode 100644 arch/arm/mach-omap2/mux34xx.h
create mode 100644 arch/arm/plat-omap/include/plat/i2c.h
--
Signature
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write}
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
@ 2009-12-03 0:21 ` Tony Lindgren
2009-12-03 0:21 ` [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3 Tony Lindgren
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:21 UTC (permalink / raw)
To: linux-arm-kernel
From: Mike Rapoport <mike@compulab.co.il>
intoduce omap_mux_{read,write}
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.c | 44 ++++++++++++++++++++++++++++++++++++++------
1 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index c18a94e..64250c5 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -35,7 +35,27 @@
#ifdef CONFIG_OMAP_MUX
+#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
+#define OMAP_MUX_BASE_SZ 0x5ca
+
static struct omap_mux_cfg arch_mux_cfg;
+static void __iomem *mux_base;
+
+static inline u16 omap_mux_read(u16 reg)
+{
+ if (cpu_is_omap24xx())
+ return __raw_readb(mux_base + reg);
+ else
+ return __raw_readw(mux_base + reg);
+}
+
+static inline void omap_mux_write(u16 val, u16 reg)
+{
+ if (cpu_is_omap24xx())
+ __raw_writeb(val, mux_base + reg);
+ else
+ __raw_writew(val, mux_base + reg);
+}
/* NOTE: See mux.h for the enumeration */
@@ -581,10 +601,7 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
u16 orig;
u8 warn = 0, debug = 0;
- if (cpu_is_omap24xx())
- orig = omap_ctrl_readb(cfg->mux_reg);
- else
- orig = omap_ctrl_readw(cfg->mux_reg);
+ orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
@@ -614,7 +631,7 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
if (cfg->pu_pd_val)
reg |= OMAP2_PULL_UP;
omap2_cfg_debug(cfg, reg);
- omap_ctrl_writeb(reg, cfg->mux_reg);
+ omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
spin_unlock_irqrestore(&mux_spin_lock, flags);
return 0;
@@ -633,7 +650,7 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
spin_lock_irqsave(&mux_spin_lock, flags);
reg |= cfg->mux_val;
omap2_cfg_debug(cfg, reg);
- omap_ctrl_writew(reg, cfg->mux_reg);
+ omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
spin_unlock_irqrestore(&mux_spin_lock, flags);
return 0;
@@ -644,6 +661,21 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
int __init omap2_mux_init(void)
{
+ u32 mux_pbase;
+
+ if (cpu_is_omap2420())
+ mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+ else if (cpu_is_omap2430())
+ mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+ else if (cpu_is_omap34xx())
+ mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+
+ mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
+ if (!mux_base) {
+ printk(KERN_ERR "mux: Could not ioremap\n");
+ return -ENODEV;
+ }
+
if (cpu_is_omap24xx()) {
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
2009-12-03 0:21 ` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren
@ 2009-12-03 0:21 ` Tony Lindgren
2009-12-03 0:21 ` [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx Tony Lindgren
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:21 UTC (permalink / raw)
To: linux-arm-kernel
Initially only for 34xx. This code allows us to:
- Make the code more generic as the omap internal signal
names can stay the same across omap generations for some
devices
- Map mux registers to GPIO registers that is needed for
dynamic muxing of pins during off-idle
- Override bootloader mux values via kernel cmdline using
omap_mux=some.signa1=0x1234,some.signal2=0x1234
- View and set the mux registers via debugfs if
CONFIG_DEBUG_FS is enabled
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Documentation/kernel-parameters.txt | 5
arch/arm/mach-omap2/mux.c | 444 +++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux.h | 160 +++++++++++++
arch/arm/plat-omap/mux.c | 8 -
4 files changed, 611 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/mach-omap2/mux.h
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9107b38..24a0d84 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1772,6 +1772,11 @@ and is between 256 and 4096 characters. It is defined in the file
waiting for the ACK, so if this is set too high
interrupts *may* be lost!
+ omap_mux= [OMAP] Override bootloader pin multiplexing.
+ Format: <mux_mode0.mode_name=value>...
+ For example, to override I2C bus2:
+ omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
+
opl3= [HW,OSS]
Format: <io>
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 64250c5..b082b50 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -27,18 +27,23 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/list.h>
#include <asm/system.h>
#include <plat/control.h>
#include <plat/mux.h>
-#ifdef CONFIG_OMAP_MUX
+#include "mux.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
-static struct omap_mux_cfg arch_mux_cfg;
+struct omap_mux_entry {
+ struct omap_mux mux;
+ struct list_head node;
+};
+
static void __iomem *mux_base;
static inline u16 omap_mux_read(u16 reg)
@@ -57,6 +62,10 @@ static inline void omap_mux_write(u16 val, u16 reg)
__raw_writew(val, mux_base + reg);
}
+#ifdef CONFIG_OMAP_MUX
+
+static struct omap_mux_cfg arch_mux_cfg;
+
/* NOTE: See mux.h for the enumeration */
#ifdef CONFIG_ARCH_OMAP24XX
@@ -667,8 +676,8 @@ int __init omap2_mux_init(void)
mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else if (cpu_is_omap2430())
mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
- else if (cpu_is_omap34xx())
- mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+ else
+ return -ENODEV;
mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
if (!mux_base) {
@@ -689,4 +698,431 @@ int __init omap2_mux_init(void)
return omap_mux_register(&arch_mux_cfg);
}
+#endif /* CONFIG_OMAP_MUX */
+
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+static LIST_HEAD(muxmodes);
+static DEFINE_MUTEX(muxmode_mutex);
+
+#ifdef CONFIG_OMAP_MUX
+
+static char *omap_mux_options;
+
+int __init omap_mux_init_gpio(int gpio, int val)
+{
+ struct omap_mux_entry *e;
+ int found = 0;
+
+ if (!gpio)
+ return -EINVAL;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ if (gpio == m->gpio) {
+ u16 old_mode;
+ u16 mux_mode;
+
+ old_mode = omap_mux_read(m->reg_offset);
+ mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+ mux_mode |= OMAP_MUX_MODE4;
+ printk(KERN_DEBUG "mux: Setting signal "
+ "%s.gpio%i 0x%04x -> 0x%04x\n",
+ m->muxnames[0], gpio, old_mode, mux_mode);
+ omap_mux_write(mux_mode, m->reg_offset);
+ found++;
+ }
+ }
+
+ if (found == 1)
+ return 0;
+
+ if (found > 1) {
+ printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+ return -EINVAL;
+ }
+
+ printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+
+ return -ENODEV;
+}
+
+int __init omap_mux_init_signal(char *muxname, int val)
+{
+ struct omap_mux_entry *e;
+ char *m0_name = NULL, *mode_name = NULL;
+ int found = 0;
+
+ mode_name = strchr(muxname, '.');
+ if (mode_name) {
+ *mode_name = '\0';
+ mode_name++;
+ m0_name = muxname;
+ } else {
+ mode_name = muxname;
+ }
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ char *m0_entry = m->muxnames[0];
+ int i;
+
+ if (m0_name && strcmp(m0_name, m0_entry))
+ continue;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+ char *mode_cur = m->muxnames[i];
+
+ if (!mode_cur)
+ continue;
+
+ if (!strcmp(mode_name, mode_cur)) {
+ u16 old_mode;
+ u16 mux_mode;
+
+ old_mode = omap_mux_read(m->reg_offset);
+ mux_mode = val | i;
+ printk(KERN_DEBUG "mux: Setting signal "
+ "%s.%s 0x%04x -> 0x%04x\n",
+ m0_entry, muxname, old_mode, mux_mode);
+ omap_mux_write(mux_mode, m->reg_offset);
+ found++;
+ }
+ }
+ }
+
+ if (found == 1)
+ return 0;
+
+ if (found > 1) {
+ printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
+ found, muxname);
+ return -EINVAL;
+ }
+
+ printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
+
+ return -ENODEV;
+}
+
+static void __init omap_mux_free_names(struct omap_mux *m)
+{
+ int i;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++)
+ kfree(m->muxnames[i]);
+
+#ifdef CONFIG_DEBUG_FS
+ for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
+ kfree(m->balls[i]);
+#endif
+
+}
+
+/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
+static int __init omap_mux_late_init(void)
+{
+ struct omap_mux_entry *e, *tmp;
+
+ list_for_each_entry_safe(e, tmp, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ u16 mode = omap_mux_read(m->reg_offset);
+
+ if (OMAP_MODE_GPIO(mode))
+ continue;
+
+#ifndef CONFIG_DEBUG_FS
+ mutex_lock(&muxmode_mutex);
+ list_del(&e->node);
+ mutex_unlock(&muxmode_mutex);
+ omap_mux_free_names(m);
+ kfree(m);
#endif
+
+ }
+
+ return 0;
+}
+late_initcall(omap_mux_late_init);
+
+static void __init omap_mux_package_fixup(struct omap_mux *p,
+ struct omap_mux *superset)
+{
+ while (p->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *s = superset;
+ int found = 0;
+
+ while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+ if (s->reg_offset == p->reg_offset) {
+ *s = *p;
+ found++;
+ break;
+ }
+ s++;
+ }
+ if (!found)
+ printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
+ p->reg_offset);
+ p++;
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void __init omap_mux_package_init_balls(struct omap_ball *b,
+ struct omap_mux *superset)
+{
+ while (b->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *s = superset;
+ int found = 0;
+
+ while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+ if (s->reg_offset == b->reg_offset) {
+ s->balls[0] = b->balls[0];
+ s->balls[1] = b->balls[1];
+ found++;
+ break;
+ }
+ s++;
+ }
+ if (!found)
+ printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
+ b->reg_offset);
+ b++;
+ }
+}
+
+#else /* CONFIG_DEBUG_FS */
+
+static inline void omap_mux_package_init_balls(struct omap_ball *b,
+ struct omap_mux *superset)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __init omap_mux_setup(char *options)
+{
+ if (!options)
+ return 0;
+
+ omap_mux_options = options;
+
+ return 1;
+}
+__setup("omap_mux=", omap_mux_setup);
+
+/*
+ * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
+ * cmdline options only override the bootloader values.
+ * During development, please enable CONFIG_DEBUG_FS, and use the
+ * signal specific entries under debugfs.
+ */
+static void __init omap_mux_set_cmdline_signals(void)
+{
+ char *options, *next_opt, *token;
+
+ if (!omap_mux_options)
+ return;
+
+ options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+ if (!options)
+ return;
+
+ strcpy(options, omap_mux_options);
+ next_opt = options;
+
+ while ((token = strsep(&next_opt, ",")) != NULL) {
+ char *keyval, *name;
+ unsigned long val;
+
+ keyval = token;
+ name = strsep(&keyval, "=");
+ if (name) {
+ int res;
+
+ res = strict_strtoul(keyval, 0x10, &val);
+ if (res < 0)
+ continue;
+
+ omap_mux_init_signal(name, (u16)val);
+ }
+ }
+
+ kfree(options);
+}
+
+static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
+{
+ while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
+ omap_mux_write(board_mux->value, board_mux->reg_offset);
+ board_mux++;
+ }
+}
+
+static int __init omap_mux_copy_names(struct omap_mux *src,
+ struct omap_mux *dst)
+{
+ int i;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+ if (src->muxnames[i]) {
+ dst->muxnames[i] =
+ kmalloc(strlen(src->muxnames[i]) + 1,
+ GFP_KERNEL);
+ if (!dst->muxnames[i])
+ goto free;
+ strcpy(dst->muxnames[i], src->muxnames[i]);
+ }
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
+ if (src->balls[i]) {
+ dst->balls[i] =
+ kmalloc(strlen(src->balls[i]) + 1,
+ GFP_KERNEL);
+ if (!dst->balls[i])
+ goto free;
+ strcpy(dst->balls[i], src->balls[i]);
+ }
+ }
+#endif
+
+ return 0;
+
+free:
+ omap_mux_free_names(dst);
+ return -ENOMEM;
+
+}
+
+#endif /* CONFIG_OMAP_MUX */
+
+static u16 omap_mux_get_by_gpio(int gpio)
+{
+ struct omap_mux_entry *e;
+ u16 offset = OMAP_MUX_TERMINATOR;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ if (m->gpio == gpio) {
+ offset = m->reg_offset;
+ break;
+ }
+ }
+
+ return offset;
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+u16 omap_mux_get_gpio(int gpio)
+{
+ u16 offset;
+
+ offset = omap_mux_get_by_gpio(gpio);
+ if (offset == OMAP_MUX_TERMINATOR) {
+ printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
+ return offset;
+ }
+
+ return omap_mux_read(offset);
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+void omap_mux_set_gpio(u16 val, int gpio)
+{
+ u16 offset;
+
+ offset = omap_mux_get_by_gpio(gpio);
+ if (offset == OMAP_MUX_TERMINATOR) {
+ printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+ return;
+ }
+
+ omap_mux_write(val, offset);
+}
+
+static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
+{
+ struct omap_mux_entry *entry;
+ struct omap_mux *m;
+
+ entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
+ if (!entry)
+ return NULL;
+
+ m = &entry->mux;
+ memcpy(m, src, sizeof(struct omap_mux_entry));
+
+#ifdef CONFIG_OMAP_MUX
+ if (omap_mux_copy_names(src, m)) {
+ kfree(entry);
+ return NULL;
+ }
+#endif
+
+ mutex_lock(&muxmode_mutex);
+ list_add_tail(&entry->node, &muxmodes);
+ mutex_unlock(&muxmode_mutex);
+
+ return m;
+}
+
+/*
+ * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
+ * the GPIO to mux offset mapping that is needed for dynamic muxing
+ * of GPIO pins for off-idle.
+ */
+static void __init omap_mux_init_list(struct omap_mux *superset)
+{
+ while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *entry;
+
+#ifndef CONFIG_OMAP_MUX
+ /* Skip pins that are not muxed as GPIO by bootloader */
+ if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+ superset++;
+ continue;
+ }
+#endif
+
+ entry = omap_mux_list_add(superset);
+ if (!entry) {
+ printk(KERN_ERR "mux: Could not add entry\n");
+ return;
+ }
+ superset++;
+ }
+}
+
+int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
+ struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_board_mux *board_mux,
+ struct omap_ball *package_balls)
+{
+ if (mux_base)
+ return -EBUSY;
+
+ mux_base = ioremap(mux_pbase, mux_size);
+ if (!mux_base) {
+ printk(KERN_ERR "mux: Could not ioremap\n");
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_OMAP_MUX
+ omap_mux_package_fixup(package_subset, superset);
+ omap_mux_package_init_balls(package_balls, superset);
+ omap_mux_set_cmdline_signals();
+ omap_mux_set_board_signals(board_mux);
+#endif
+
+ omap_mux_init_list(superset);
+
+ return 0;
+}
+
+#endif /* CONFIG_ARCH_OMAP34XX */
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
new file mode 100644
index 0000000..bebe9cc
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP_MUX_TERMINATOR 0xffff
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0 0
+#define OMAP_MUX_MODE1 1
+#define OMAP_MUX_MODE2 2
+#define OMAP_MUX_MODE3 3
+#define OMAP_MUX_MODE4 4
+#define OMAP_MUX_MODE5 5
+#define OMAP_MUX_MODE6 6
+#define OMAP_MUX_MODE7 7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA (1 << 3)
+#define OMAP_PULL_UP (1 << 4)
+#define OMAP_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN (1 << 8)
+#define OMAP_OFF_EN (1 << 9)
+#define OMAP_OFFOUT_EN (1 << 10)
+#define OMAP_OFFOUT_VAL (1 << 11)
+#define OMAP_OFF_PULL_EN (1 << 12)
+#define OMAP_OFF_PULL_UP (1 << 13)
+#define OMAP_WAKEUP_EN (1 << 14)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT 0
+#define OMAP_PIN_INPUT OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
+ | OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE 0
+#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
+ | OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+ | OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
+
+#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+
+/* Flags for omap_mux_init */
+#define OMAP_PACKAGE_MASK 0xffff
+#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
+
+
+#define OMAP_MUX_NR_MODES 8 /* Available modes */
+#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
+
+/**
+ * struct omap_mux - data for omap mux register offset and it's value
+ * @reg_offset: mux register offset from the mux base
+ * @gpio: GPIO number
+ * @muxnames: available signal modes for a ball
+ */
+struct omap_mux {
+ u16 reg_offset;
+ u16 gpio;
+#ifdef CONFIG_OMAP_MUX
+ char *muxnames[OMAP_MUX_NR_MODES];
+#ifdef CONFIG_DEBUG_FS
+ char *balls[OMAP_MUX_NR_SIDES];
+#endif
+#endif
+};
+
+/**
+ * struct omap_ball - data for balls on omap package
+ * @reg_offset: mux register offset from the mux base
+ * @balls: available balls on the package
+ */
+struct omap_ball {
+ u16 reg_offset;
+ char *balls[OMAP_MUX_NR_SIDES];
+};
+
+/**
+ * struct omap_board_mux - data for initializing mux registers
+ * @reg_offset: mux register offset from the mux base
+ * @mux_value: desired mux value to set
+ */
+struct omap_board_mux {
+ u16 reg_offset;
+ u16 value;
+};
+
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+
+/**
+ * omap_mux_init_gpio - initialize a signal based on the GPIO number
+ * @gpio: GPIO number
+ * @val: Options for the mux register value
+ */
+int omap_mux_init_gpio(int gpio, int val);
+
+/**
+ * omap_mux_init_signal - initialize a signal based on the signal name
+ * @muxname: Mux name in mode0_name.signal_name format
+ * @val: Options for the mux register value
+ */
+int omap_mux_init_signal(char *muxname, int val);
+
+#else
+
+static inline int omap_mux_init_gpio(int gpio, int val)
+{
+ return 0;
+}
+static inline int omap_mux_init_signal(char *muxname, int val)
+{
+ return 0;
+}
+
+#endif
+
+/**
+ * omap_mux_get_gpio() - get mux register value based on GPIO number
+ * @gpio: GPIO number
+ *
+ */
+u16 omap_mux_get_gpio(int gpio);
+
+/**
+ * omap_mux_set_gpio() - set mux register value based on GPIO number
+ * @val: New mux register value
+ * @gpio: GPIO number
+ *
+ */
+void omap_mux_set_gpio(u16 val, int gpio);
+
+/**
+ * omap3_mux_init() - initialize mux system with board specific set
+ * @board_mux: Board specific mux table
+ * @flags: OMAP package type used for the board
+ */
+int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap_mux_init - private mux init function, do not call
+ */
+int omap_mux_init(u32 mux_pbase, u32 mux_size,
+ struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_board_mux *board_mux,
+ struct omap_ball *package_balls);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 05aebca..0670363 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
- if (cpu_is_omap44xx())
- return 0;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
2009-12-03 0:21 ` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren
2009-12-03 0:21 ` [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3 Tony Lindgren
@ 2009-12-03 0:21 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files Tony Lindgren
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:21 UTC (permalink / raw)
To: linux-arm-kernel
Add new style mux data for 34xx. This should also
work with 3630 easily by adding the processor subset
and ball data.
Note that this data is __initdata, and gets optimized
out except for the GPIO pins if CONFIG_OMAP_MUX
is not set.
Also note that this data uses omap3630 naming for
the SDMMC registers instead of 34xx naming with just
MMC.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 9
arch/arm/mach-omap2/Makefile | 3
arch/arm/mach-omap2/mux.h | 2
arch/arm/mach-omap2/mux34xx.c | 1579 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux34xx.h | 356 +++++++++
5 files changed, 1949 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/mux34xx.c
create mode 100644 arch/arm/mach-omap2/mux34xx.h
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 034d990..c324d52 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -24,6 +24,15 @@ config ARCH_OMAP3430
depends on ARCH_OMAP3 && ARCH_OMAP34XX
select ARCH_OMAP_OTG
+config OMAP_PACKAGE_CBC
+ bool
+
+config OMAP_PACKAGE_CBB
+ bool
+
+config OMAP_PACKAGE_CUS
+ bool
+
comment "OMAP Board Type"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 59b0ccc..3d0c35f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
+# Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
+
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index bebe9cc..a6bd58f 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -7,6 +7,8 @@
* published by the Free Software Foundation.
*/
+#include "mux34xx.h"
+
#define OMAP_MUX_TERMINATOR 0xffff
/* 34xx mux mode options for each pin. See TRM for options */
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
new file mode 100644
index 0000000..116d5b2
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -0,0 +1,1579 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+ .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
+}
+
+#else
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+}
+
+#endif
+
+#define _OMAP3_BALLENTRY(M0, bb, bt) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .balls = { bb, bt }, \
+}
+
+/*
+ * Superset of all mux modes for omap3
+ */
+static struct omap_mux __initdata omap3_muxmodes[] = {
+ _OMAP3_MUXENTRY(CAM_D0, 99,
+ "cam_d0", NULL, NULL, NULL,
+ "gpio_99", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D1, 100,
+ "cam_d1", NULL, NULL, NULL,
+ "gpio_100", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", "hw_dbg8", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", "hw_dbg9", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", "hw_dbg4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", "hw_dbg5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", "hw_dbg6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", "hw_dbg7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D6, 105,
+ "cam_d6", NULL, NULL, NULL,
+ "gpio_105", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D7, 106,
+ "cam_d7", NULL, NULL, NULL,
+ "gpio_106", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D8, 107,
+ "cam_d8", NULL, NULL, NULL,
+ "gpio_107", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D9, 108,
+ "cam_d9", NULL, NULL, NULL,
+ "gpio_108", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", "hw_dbg3", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", "hw_dbg0", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", "hw_dbg2", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", "hw_dbg11", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", "hw_dbg1", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", "hw_dbg10", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_XCLKA, 96,
+ "cam_xclka", NULL, NULL, NULL,
+ "gpio_96", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_XCLKB, 111,
+ "cam_xclkb", NULL, NULL, NULL,
+ "gpio_111", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DX0, 112,
+ "csi2_dx0", NULL, NULL, NULL,
+ "gpio_112", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DX1, 114,
+ "csi2_dx1", NULL, NULL, NULL,
+ "gpio_114", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DY0, 113,
+ "csi2_dy0", NULL, NULL, NULL,
+ "gpio_113", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DY1, 115,
+ "csi2_dy1", NULL, NULL, NULL,
+ "gpio_115", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_ACBIAS, 69,
+ "dss_acbias", NULL, NULL, NULL,
+ "gpio_69", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA0, 70,
+ "dss_data0", NULL, "uart1_cts", NULL,
+ "gpio_70", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA1, 71,
+ "dss_data1", NULL, "uart1_rts", NULL,
+ "gpio_71", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA10, 80,
+ "dss_data10", NULL, NULL, NULL,
+ "gpio_80", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA11, 81,
+ "dss_data11", NULL, NULL, NULL,
+ "gpio_81", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA12, 82,
+ "dss_data12", NULL, NULL, NULL,
+ "gpio_82", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA13, 83,
+ "dss_data13", NULL, NULL, NULL,
+ "gpio_83", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA14, 84,
+ "dss_data14", NULL, NULL, NULL,
+ "gpio_84", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA15, 85,
+ "dss_data15", NULL, NULL, NULL,
+ "gpio_85", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA16, 86,
+ "dss_data16", NULL, NULL, NULL,
+ "gpio_86", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA17, 87,
+ "dss_data17", NULL, NULL, NULL,
+ "gpio_87", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA18, 88,
+ "dss_data18", NULL, "mcspi3_clk", "dss_data0",
+ "gpio_88", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA19, 89,
+ "dss_data19", NULL, "mcspi3_simo", "dss_data1",
+ "gpio_89", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA20, 90,
+ "dss_data20", NULL, "mcspi3_somi", "dss_data2",
+ "gpio_90", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA21, 91,
+ "dss_data21", NULL, "mcspi3_cs0", "dss_data3",
+ "gpio_91", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA22, 92,
+ "dss_data22", NULL, "mcspi3_cs1", "dss_data4",
+ "gpio_92", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA23, 93,
+ "dss_data23", NULL, NULL, "dss_data5",
+ "gpio_93", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA2, 72,
+ "dss_data2", NULL, NULL, NULL,
+ "gpio_72", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA3, 73,
+ "dss_data3", NULL, NULL, NULL,
+ "gpio_73", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA4, 74,
+ "dss_data4", NULL, "uart3_rx_irrx", NULL,
+ "gpio_74", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA5, 75,
+ "dss_data5", NULL, "uart3_tx_irtx", NULL,
+ "gpio_75", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", "hw_dbg14", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", "hw_dbg15", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", "hw_dbg16", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", "hw_dbg17", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", "hw_dbg13", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", "hw_dbg12", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_VSYNC, 68,
+ "dss_vsync", NULL, NULL, NULL,
+ "gpio_68", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
+ _OMAP3_MUXENTRY(GPMC_A1, 34,
+ "gpmc_a1", NULL, NULL, NULL,
+ "gpio_34", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A10, 43,
+ "gpmc_a10", "sys_ndmareq3", NULL, NULL,
+ "gpio_43", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A2, 35,
+ "gpmc_a2", NULL, NULL, NULL,
+ "gpio_35", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A3, 36,
+ "gpmc_a3", NULL, NULL, NULL,
+ "gpio_36", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A4, 37,
+ "gpmc_a4", NULL, NULL, NULL,
+ "gpio_37", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A5, 38,
+ "gpmc_a5", NULL, NULL, NULL,
+ "gpio_38", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A6, 39,
+ "gpmc_a6", NULL, NULL, NULL,
+ "gpio_39", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A7, 40,
+ "gpmc_a7", NULL, NULL, NULL,
+ "gpio_40", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A8, 41,
+ "gpmc_a8", NULL, NULL, NULL,
+ "gpio_41", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A9, 42,
+ "gpmc_a9", "sys_ndmareq2", NULL, NULL,
+ "gpio_42", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_CLK, 59,
+ "gpmc_clk", NULL, NULL, NULL,
+ "gpio_59", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D10, 46,
+ "gpmc_d10", NULL, NULL, NULL,
+ "gpio_46", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D11, 47,
+ "gpmc_d11", NULL, NULL, NULL,
+ "gpio_47", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D12, 48,
+ "gpmc_d12", NULL, NULL, NULL,
+ "gpio_48", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D13, 49,
+ "gpmc_d13", NULL, NULL, NULL,
+ "gpio_49", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D14, 50,
+ "gpmc_d14", NULL, NULL, NULL,
+ "gpio_50", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D15, 51,
+ "gpmc_d15", NULL, NULL, NULL,
+ "gpio_51", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D8, 44,
+ "gpmc_d8", NULL, NULL, NULL,
+ "gpio_44", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D9, 45,
+ "gpmc_d9", NULL, NULL, NULL,
+ "gpio_45", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
+ "gpmc_nbe0_cle", NULL, NULL, NULL,
+ "gpio_60", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NBE1, 61,
+ "gpmc_nbe1", NULL, NULL, NULL,
+ "gpio_61", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS1, 52,
+ "gpmc_ncs1", NULL, NULL, NULL,
+ "gpio_52", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS2, 53,
+ "gpmc_ncs2", NULL, NULL, NULL,
+ "gpio_53", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS3, 54,
+ "gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
+ "gpio_54", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS4, 55,
+ "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
+ "gpio_55", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS5, 56,
+ "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
+ "gpio_56", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS6, 57,
+ "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
+ "gpio_57", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS7, 58,
+ "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
+ "gpio_58", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NWP, 62,
+ "gpmc_nwp", NULL, NULL, NULL,
+ "gpio_62", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT1, 63,
+ "gpmc_wait1", NULL, NULL, NULL,
+ "gpio_63", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+ "gpmc_wait2", NULL, NULL, NULL,
+ "gpio_64", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+ "gpmc_wait3", "sys_ndmareq1", NULL, NULL,
+ "gpio_65", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HDQ_SIO, 170,
+ "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
+ "gpio_170", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_CLK, 120,
+ "hsusb0_clk", NULL, NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+ "hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+ "hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+ "gpio_130", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+ "hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+ "gpio_131", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+ "hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+ "gpio_169", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
+ "hsusb0_data4", NULL, NULL, NULL,
+ "gpio_188", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
+ "hsusb0_data5", NULL, NULL, NULL,
+ "gpio_189", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
+ "hsusb0_data6", NULL, NULL, NULL,
+ "gpio_190", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
+ "hsusb0_data7", NULL, NULL, NULL,
+ "gpio_191", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DIR, 122,
+ "hsusb0_dir", NULL, NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_NXT, 124,
+ "hsusb0_nxt", NULL, NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_STP, 121,
+ "hsusb0_stp", NULL, NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C2_SCL, 168,
+ "i2c2_scl", NULL, NULL, NULL,
+ "gpio_168", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C2_SDA, 183,
+ "i2c2_sda", NULL, NULL, NULL,
+ "gpio_183", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C3_SCL, 184,
+ "i2c3_scl", NULL, NULL, NULL,
+ "gpio_184", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C3_SDA, 185,
+ "i2c3_sda", NULL, NULL, NULL,
+ "gpio_185", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C4_SCL, 0,
+ "i2c4_scl", "sys_nvmode1", NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C4_SDA, 0,
+ "i2c4_sda", "sys_nvmode2", NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(JTAG_EMU0, 11,
+ "jtag_emu0", NULL, NULL, NULL,
+ "gpio_11", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(JTAG_EMU1, 31,
+ "jtag_emu1", NULL, NULL, NULL,
+ "gpio_31", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+ "mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
+ "gpio_156", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
+ "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
+ "gpio_162", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_DR, 159,
+ "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
+ "gpio_159", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_DX, 158,
+ "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
+ "gpio_158", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+ "mcbsp1_fsr", NULL, "cam_global_reset", NULL,
+ "gpio_157", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSX, 161,
+ "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
+ "gpio_161", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
+ "mcbsp2_clkx", NULL, NULL, NULL,
+ "gpio_117", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_DR, 118,
+ "mcbsp2_dr", NULL, NULL, NULL,
+ "gpio_118", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_DX, 119,
+ "mcbsp2_dx", NULL, NULL, NULL,
+ "gpio_119", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_FSX, 116,
+ "mcbsp2_fsx", NULL, NULL, NULL,
+ "gpio_116", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+ "mcbsp3_clkx", "uart2_tx", NULL, NULL,
+ "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DR, 141,
+ "mcbsp3_dr", "uart2_rts", NULL, NULL,
+ "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DX, 140,
+ "mcbsp3_dx", "uart2_cts", NULL, NULL,
+ "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+ "mcbsp3_fsx", "uart2_rx", NULL, NULL,
+ "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+ "mcbsp4_clkx", NULL, NULL, NULL,
+ "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DR, 153,
+ "mcbsp4_dr", NULL, NULL, NULL,
+ "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DX, 154,
+ "mcbsp4_dx", NULL, NULL, NULL,
+ "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+ "mcbsp4_fsx", NULL, NULL, NULL,
+ "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP_CLKS, 160,
+ "mcbsp_clks", NULL, "cam_shutter", NULL,
+ "gpio_160", "uart1_cts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CLK, 171,
+ "mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
+ "gpio_171", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS0, 174,
+ "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
+ "gpio_174", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+ "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
+ "gpio_175", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS2, 176,
+ "mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
+ "gpio_176", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS3, 177,
+ "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
+ "gpio_177", "mm2_txdat", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
+ "mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
+ "gpio_172", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
+ "mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
+ "gpio_173", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CLK, 178,
+ "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
+ "gpio_178", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CS0, 181,
+ "mcspi2_cs0", "gpt11_pwm_evt",
+ "hsusb2_tll_data6", "hsusb2_data6",
+ "gpio_181", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CS1, 182,
+ "mcspi2_cs1", "gpt8_pwm_evt",
+ "hsusb2_tll_data3", "hsusb2_data3",
+ "gpio_182", "mm2_txen_n", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
+ "mcspi2_simo", "gpt9_pwm_evt",
+ "hsusb2_tll_data4", "hsusb2_data4",
+ "gpio_179", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
+ "mcspi2_somi", "gpt10_pwm_evt",
+ "hsusb2_tll_data5", "hsusb2_data5",
+ "gpio_180", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+ "sdmmc1_clk", NULL, NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+ "sdmmc1_cmd", NULL, NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+ "sdmmc1_dat0", NULL, NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+ "sdmmc1_dat1", NULL, NULL, NULL,
+ "gpio_123", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+ "sdmmc1_dat2", NULL, NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+ "sdmmc1_dat3", NULL, NULL, NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
+ "sdmmc1_dat4", NULL, "sim_io", NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
+ "sdmmc1_dat5", NULL, "sim_clk", NULL,
+ "gpio_127", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
+ "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
+ "gpio_128", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
+ "sdmmc1_dat7", NULL, "sim_rst", NULL,
+ "gpio_129", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_CLK, 130,
+ "sdmmc2_clk", "mcspi3_clk", NULL, NULL,
+ "gpio_130", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_CMD, 131,
+ "sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
+ "gpio_131", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
+ "sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
+ "gpio_132", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
+ "sdmmc2_dat1", NULL, NULL, NULL,
+ "gpio_133", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
+ "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
+ "gpio_134", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
+ "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
+ "gpio_135", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
+ "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
+ "gpio_136", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+ "sdmmc2_dat5", "sdmmc2_dir_dat1",
+ "cam_global_reset", "sdmmc3_dat1",
+ "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+ "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+ "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+ "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+ "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE0, 0,
+ "sdrc_cke0", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE1, 0,
+ "sdrc_cke1", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT0, 2,
+ "sys_boot0", NULL, NULL, NULL,
+ "gpio_2", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT1, 3,
+ "sys_boot1", NULL, NULL, NULL,
+ "gpio_3", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT2, 4,
+ "sys_boot2", NULL, NULL, NULL,
+ "gpio_4", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT3, 5,
+ "sys_boot3", NULL, NULL, NULL,
+ "gpio_5", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT4, 6,
+ "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
+ "gpio_6", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT5, 7,
+ "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
+ "gpio_7", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT6, 8,
+ "sys_boot6", NULL, NULL, NULL,
+ "gpio_8", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
+ "sys_clkout1", NULL, NULL, NULL,
+ "gpio_10", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
+ "sys_clkout2", NULL, NULL, NULL,
+ "gpio_186", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKREQ, 1,
+ "sys_clkreq", NULL, NULL, NULL,
+ "gpio_1", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_NIRQ, 0,
+ "sys_nirq", NULL, NULL, NULL,
+ "gpio_0", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_NRESWARM, 30,
+ "sys_nreswarm", NULL, NULL, NULL,
+ "gpio_30", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
+ "sys_off_mode", NULL, NULL, NULL,
+ "gpio_9", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", NULL, NULL, NULL,
+ "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RTS, 149,
+ "uart1_rts", NULL, NULL, NULL,
+ "gpio_149", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RX, 151,
+ "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "gpio_151", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_TX, 148,
+ "uart1_tx", NULL, NULL, NULL,
+ "gpio_148", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_CTS, 144,
+ "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
+ "gpio_144", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_RTS, 145,
+ "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
+ "gpio_145", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_RX, 147,
+ "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
+ "gpio_147", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_TX, 146,
+ "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
+ "gpio_146", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
+ "uart3_cts_rctx", NULL, NULL, NULL,
+ "gpio_163", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_RTS_SD, 164,
+ "uart3_rts_sd", NULL, NULL, NULL,
+ "gpio_164", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
+ "uart3_rx_irrx", NULL, NULL, NULL,
+ "gpio_165", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
+ "uart3_tx_irtx", NULL, NULL, NULL,
+ "gpio_166", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Signals different on CBC package compared to the superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_mux __initdata omap3_cbc_subset[] = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_subset NULL
+#endif
+
+/*
+ * Balls for CBC package
+ * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
+ *
+ * FIXME: What's up with the outdated TI documentation? See:
+ *
+ * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
+ * http://community.ti.com/forums/t/10982.aspx
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_ball __initdata omap3_cbc_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
+ _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
+ _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
+ _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
+ _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
+ _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
+ _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
+ _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
+ _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
+ _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_ball NULL
+#endif
+
+/*
+ * Signals different on CUS package compared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_mux __initdata omap3_cus_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", NULL),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", NULL),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", NULL),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", NULL),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+ "mcbsp3_clkx", "uart2_tx", NULL, NULL,
+ "gpio_142", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DR, 141,
+ "mcbsp3_dr", "uart2_rts", NULL, NULL,
+ "gpio_141", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DX, 140,
+ "mcbsp3_dx", "uart2_cts", NULL, NULL,
+ "gpio_140", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+ "mcbsp3_fsx", "uart2_rx", NULL, NULL,
+ "gpio_143", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+ "sdmmc2_dat5", "sdmmc2_dir_dat1",
+ "cam_global_reset", "sdmmc3_dat1",
+ "gpio_137", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+ "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+ "gpio_138", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+ "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+ "gpio_139", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", NULL, NULL, NULL,
+ "gpio_150", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_subset NULL
+#endif
+
+/*
+ * Balls for CUS package
+ * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_ball __initdata omap3_cus_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
+ _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
+ _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
+ _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
+ _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
+ _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
+ _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
+ _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
+ _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
+ _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_ball NULL
+#endif
+
+/*
+ * Signals different on CBB package comapared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_mux __initdata omap3_cbb_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", NULL),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", NULL),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", NULL),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", NULL),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_subset NULL
+#endif
+
+/*
+ * Balls for CBB package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_ball __initdata omap3_cbb_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+ _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+ _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+ _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+ _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+ _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+ _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+ _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+ _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+ _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+ _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+ _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+ _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+ _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+ _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+ _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+ _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+ _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+ _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_ball NULL
+#endif
+
+int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+ struct omap_mux *package_subset;
+ struct omap_ball *package_balls;
+
+ switch (flags & OMAP_PACKAGE_MASK) {
+ case (OMAP_PACKAGE_CBC):
+ package_subset = omap3_cbc_subset;
+ package_balls = omap3_cbc_ball;
+ break;
+ case (OMAP_PACKAGE_CBB):
+ package_subset = omap3_cbb_subset;
+ package_balls = omap3_cbb_ball;
+ break;
+ case (OMAP_PACKAGE_CUS):
+ package_subset = omap3_cus_subset;
+ package_balls = omap3_cus_ball;
+ break;
+ default:
+ printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
+ return -EINVAL;
+ }
+
+ return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE,
+ OMAP3_CONTROL_PADCONF_MUX_SIZE,
+ omap3_muxmodes, package_subset, board_subset,
+ package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
new file mode 100644
index 0000000..a7cc871
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -0,0 +1,356 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU
+
+#define OMAP3_MUX(mode0, mux_value) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \
+ .value = (mux_value), \
+}
+
+/*
+ * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM. Add 0x48002030 to these values to get the
+ * absolute addresses. The name in the macro is the mode-0 name of
+ * the pin. NOTE: These registers are 16-bits wide.
+ *
+ * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
+ * of CHASSIS for some registers. For the defines, we follow the
+ * 36XX naming, and use SDMMC and CHASSIS.
+ */
+#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000
+#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002
+#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004
+#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006
+#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008
+#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a
+#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c
+#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e
+#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010
+#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012
+#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014
+#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016
+#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018
+#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a
+#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c
+#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e
+#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020
+#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022
+#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024
+#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026
+#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028
+#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a
+#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c
+#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e
+#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030
+#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032
+#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034
+#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036
+#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038
+#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a
+#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c
+#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e
+#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048
+#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a
+#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c
+#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e
+#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050
+#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052
+#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054
+#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056
+#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058
+#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a
+#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c
+#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e
+#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060
+#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062
+#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064
+#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066
+#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068
+#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a
+#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c
+#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e
+#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070
+#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072
+#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074
+#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076
+#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078
+#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a
+#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c
+#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e
+#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090
+#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092
+#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098
+#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2
+#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4
+#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6
+#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8
+#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa
+#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac
+#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae
+#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba
+#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be
+#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca
+#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce
+#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da
+#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc
+#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0
+#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2
+#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4
+#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6
+#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8
+#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea
+#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec
+#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee
+#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0
+#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2
+#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4
+#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6
+#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8
+#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa
+#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe
+#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100
+#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102
+#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104
+#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106
+#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108
+#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a
+#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c
+#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e
+#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140
+#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142
+#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144
+#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146
+#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148
+#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a
+#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c
+#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e
+#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150
+#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152
+#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158
+#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162
+#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168
+#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a
+#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c
+#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e
+#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170
+#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172
+#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176
+#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188
+#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a
+#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c
+#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e
+#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190
+#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192
+#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194
+#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae
+#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc
+/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
+#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204
+#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206
+#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224
+#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228
+#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a
+#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c
+#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e
+#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234
+#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8
+#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa
+#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac
+#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae
+#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0
+#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2
+#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4
+#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6
+#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8
+#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba
+#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc
+#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be
+#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0
+#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2
+#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4
+#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6
+#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8
+#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca
+#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0
+#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2
+#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4
+#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6
+#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6
+#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea
+#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec
+#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee
+#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0
+#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c
+#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e
+#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20
+
+#define OMAP3_CONTROL_PADCONF_MUX_SIZE \
+ (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (2 preceding siblings ...)
2009-12-03 0:21 ` [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 5/9] omap: mux: Add debugfs support for new mux code Tony Lindgren
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Add new style mux init functions to omap3 board-*.c files
So far Beagle has been confirmed to be a CBB package,
and CM-T35 a CUS package.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 10 ++++++++++
arch/arm/mach-omap2/board-3430sdp.c | 10 ++++++++++
arch/arm/mach-omap2/board-am3517evm.c | 11 +++++++++++
arch/arm/mach-omap2/board-cm-t35.c | 10 ++++++++++
arch/arm/mach-omap2/board-igep0020.c | 10 ++++++++++
arch/arm/mach-omap2/board-ldp.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3beagle.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3pandora.c | 10 ++++++++++
arch/arm/mach-omap2/board-overo.c | 9 +++++++++
arch/arm/mach-omap2/board-rx51.c | 11 +++++++++++
arch/arm/mach-omap2/board-zoom2.c | 10 ++++++++++
12 files changed, 121 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c324d52..c10789c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -61,14 +61,17 @@ config MACH_OMAP_2430SDP
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
@@ -77,14 +80,17 @@ config MACH_OMAP3EVM
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_NOKIA_N800
bool
@@ -105,10 +111,12 @@ config MACH_NOKIA_N8X0
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -117,10 +125,12 @@ config MACH_OMAP_ZOOM3
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CUS
config MACH_IGEP0020
bool "IGEP0020"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 5bda9fd..e5d9118 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -42,6 +42,7 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
@@ -640,8 +641,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_3430sdp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
if (omap_rev() > OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 415a13d..b4e6eca 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -30,6 +30,8 @@
#include <plat/common.h>
#include <plat/usb.h>
+#include "mux.h"
+
/*
* Board initialization
*/
@@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init am3517_evm_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 22c4529..84321f6 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void)
omap2_map_common_io();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init cm_t35_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index fa62e80..7e3217a 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define IGEP2_SMSC911X_CS 5
@@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void)
return 0;
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init igep2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
omap_serial_init();
usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c062238..3743173 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -43,6 +43,7 @@
#include <plat/control.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define LDP_SMSC911X_CS 1
@@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = {
&ldp_gpio_keys_device,
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_ldp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
ts_gpio = 54;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 41480bd..e669dbb 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -45,6 +45,7 @@
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define GPMC_CS0_BASE 0x60
@@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_beagle_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5efc2e9..ad174ae 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_evm_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2db5ba5..9f59c03 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -42,6 +42,7 @@
#include <plat/usb.h>
#include <plat/mux.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3pandora_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52dfd51..40f3c85 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -47,6 +47,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
static void __init overo_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1bb1de2..c0c99ad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -30,6 +30,8 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include "mux.h"
+
struct omap_sdrc_params *rx51_get_sdram_timings(void);
static struct omap_lcd_config rx51_lcd_config = {
@@ -69,8 +71,17 @@ static void __init rx51_init_irq(void)
extern void __init rx51_peripherals_init(void);
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init rx51_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 2f980e3..1e615e2 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
static void __init omap_zoom2_init_irq(void)
@@ -58,8 +59,17 @@ static struct twl4030_platform_data zoom2_twldata = {
#endif
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_zoom2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
zoom_debugboard_init();
}
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 5/9] omap: mux: Add debugfs support for new mux code
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (3 preceding siblings ...)
2009-12-03 0:22 ` [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2 Tony Lindgren
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Add debugfs support for new mux code
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.c | 227 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 227 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b082b50..d968433 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -28,6 +28,10 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
@@ -44,6 +48,7 @@ struct omap_mux_entry {
struct list_head node;
};
+static unsigned long mux_phys;
static void __iomem *mux_base;
static inline u16 omap_mux_read(u16 reg)
@@ -807,6 +812,225 @@ int __init omap_mux_init_signal(char *muxname, int val)
return -ENODEV;
}
+#ifdef CONFIG_DEBUG_FS
+
+#define OMAP_MUX_MAX_NR_FLAGS 10
+#define OMAP_MUX_TEST_FLAG(val, mask) \
+ if (((val) & (mask)) == (mask)) { \
+ i++; \
+ flags[i] = #mask; \
+ }
+
+/* REVISIT: Add checking for non-optimal mux settings */
+static inline void omap_mux_decode(struct seq_file *s, u16 val)
+{
+ char *flags[OMAP_MUX_MAX_NR_FLAGS];
+ char mode[14];
+ int i = -1;
+
+ sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
+ i++;
+ flags[i] = mode;
+
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
+ if (val & OMAP_OFF_EN) {
+ if (!(val & OMAP_OFFOUT_EN)) {
+ if (!(val & OMAP_OFF_PULL_UP)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_INPUT_PULLDOWN);
+ } else {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_INPUT_PULLUP);
+ }
+ } else {
+ if (!(val & OMAP_OFFOUT_VAL)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_OUTPUT_LOW);
+ } else {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_OUTPUT_HIGH);
+ }
+ }
+ }
+
+ if (val & OMAP_INPUT_EN) {
+ if (val & OMAP_PULL_ENA) {
+ if (!(val & OMAP_PULL_UP)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_INPUT_PULLDOWN);
+ } else {
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
+ }
+ } else {
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
+ }
+ } else {
+ i++;
+ flags[i] = "OMAP_PIN_OUTPUT";
+ }
+
+ do {
+ seq_printf(s, "%s", flags[i]);
+ if (i > 0)
+ seq_printf(s, " | ");
+ } while (i-- > 0);
+}
+
+#define OMAP_MUX_DEFNAME_LEN 16
+
+static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
+{
+ struct omap_mux_entry *e;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ char m0_def[OMAP_MUX_DEFNAME_LEN];
+ char *m0_name = m->muxnames[0];
+ u16 val;
+ int i, mode;
+
+ if (!m0_name)
+ continue;
+
+ for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
+ if (m0_name[i] == '\0') {
+ m0_def[i] = m0_name[i];
+ break;
+ }
+ m0_def[i] = toupper(m0_name[i]);
+ }
+ val = omap_mux_read(m->reg_offset);
+ mode = val & OMAP_MUX_MODE7;
+
+ seq_printf(s, "OMAP%i_MUX(%s, ",
+ cpu_is_omap34xx() ? 3 : 0, m0_def);
+ omap_mux_decode(s, val);
+ seq_printf(s, "),\n");
+ }
+
+ return 0;
+}
+
+static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_board_fops = {
+ .open = omap_mux_dbg_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
+{
+ struct omap_mux *m = s->private;
+ const char *none = "NA";
+ u16 val;
+ int mode;
+
+ val = omap_mux_read(m->reg_offset);
+ mode = val & OMAP_MUX_MODE7;
+
+ seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+ m->muxnames[0], m->muxnames[mode],
+ mux_phys + m->reg_offset, m->reg_offset, val,
+ m->balls[0] ? m->balls[0] : none,
+ m->balls[1] ? m->balls[1] : none);
+ seq_printf(s, "mode: ");
+ omap_mux_decode(s, val);
+ seq_printf(s, "\n");
+ seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
+ m->muxnames[0] ? m->muxnames[0] : none,
+ m->muxnames[1] ? m->muxnames[1] : none,
+ m->muxnames[2] ? m->muxnames[2] : none,
+ m->muxnames[3] ? m->muxnames[3] : none,
+ m->muxnames[4] ? m->muxnames[4] : none,
+ m->muxnames[5] ? m->muxnames[5] : none,
+ m->muxnames[6] ? m->muxnames[6] : none,
+ m->muxnames[7] ? m->muxnames[7] : none);
+
+ return 0;
+}
+
+#define OMAP_MUX_MAX_ARG_CHAR 7
+
+static ssize_t omap_mux_dbg_signal_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char buf[OMAP_MUX_MAX_ARG_CHAR];
+ struct seq_file *seqf;
+ struct omap_mux *m;
+ unsigned long val;
+ int buf_size, ret;
+
+ if (count > OMAP_MUX_MAX_ARG_CHAR)
+ return -EINVAL;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ ret = strict_strtoul(buf, 0x10, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val > 0xffff)
+ return -EINVAL;
+
+ seqf = file->private_data;
+ m = seqf->private;
+
+ omap_mux_write((u16)val, m->reg_offset);
+ *ppos += count;
+
+ return count;
+}
+
+static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_signal_fops = {
+ .open = omap_mux_dbg_signal_open,
+ .read = seq_read,
+ .write = omap_mux_dbg_signal_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *mux_dbg_dir;
+
+static void __init omap_mux_dbg_init(void)
+{
+ struct omap_mux_entry *e;
+
+ mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
+ if (!mux_dbg_dir)
+ return;
+
+ (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
+ NULL, &omap_mux_dbg_board_fops);
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+
+ (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+ m, &omap_mux_dbg_signal_fops);
+ }
+}
+
+#else
+static inline void omap_mux_dbg_init(void)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
static void __init omap_mux_free_names(struct omap_mux *m)
{
int i;
@@ -843,6 +1067,8 @@ static int __init omap_mux_late_init(void)
}
+ omap_mux_dbg_init();
+
return 0;
}
late_initcall(omap_mux_late_init);
@@ -1107,6 +1333,7 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
if (mux_base)
return -EBUSY;
+ mux_phys = mux_pbase;
mux_base = ioremap(mux_pbase, mux_size);
if (!mux_base) {
printk(KERN_ERR "mux: Could not ioremap\n");
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (4 preceding siblings ...)
2009-12-03 0:22 ` [PATCH 5/9] omap: mux: Add debugfs support for new mux code Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Tony Lindgren
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Otherwise we cannot limit new mux code to mach-omap2.
The same signal names should eventually work for other
omaps under mach-omap2.
Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP,
just OMAP_PIN_INPUT is enough.
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/Makefile | 3 ++
arch/arm/mach-omap1/i2c.c | 33 ++++++++++++++++++
arch/arm/mach-omap2/Makefile | 3 ++
arch/arm/mach-omap2/i2c.c | 56 ++++++++++++++++++++++++++++++
arch/arm/plat-omap/i2c.c | 44 +-----------------------
arch/arm/plat-omap/include/plat/common.h | 14 +-------
arch/arm/plat-omap/include/plat/i2c.h | 39 +++++++++++++++++++++
7 files changed, 137 insertions(+), 55 deletions(-)
create mode 100644 arch/arm/mach-omap1/i2c.c
create mode 100644 arch/arm/mach-omap2/i2c.c
create mode 100644 arch/arm/plat-omap/include/plat/i2c.h
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 87e539a..51bc195 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -17,6 +17,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
+
led-y := leds.o
# Specific board support
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
new file mode 100644
index 0000000..bc9d12b
--- /dev/null
+++ b/arch/arm/mach-omap1/i2c.c
@@ -0,0 +1,33 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ omap_cfg_reg(I2C_SDA);
+ omap_cfg_reg(I2C_SCL);
+
+ return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3d0c35f..52ceeef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -55,6 +55,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
new file mode 100644
index 0000000..789ca8c
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.c
@@ -0,0 +1,56 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/cpu.h>
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+#include "mux.h"
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ if (cpu_is_omap24xx()) {
+ const int omap24xx_pins[][2] = {
+ { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+ { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+ };
+ int scl, sda;
+
+ scl = omap24xx_pins[bus_id - 1][0];
+ sda = omap24xx_pins[bus_id - 1][1];
+ omap_cfg_reg(sda);
+ omap_cfg_reg(scl);
+ }
+
+ /* First I2C bus is not muxable */
+ if (cpu_is_omap34xx() && bus_id > 1) {
+ char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+
+ sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+ sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+ }
+
+ return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index c08362d..33fff4e 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = {
#endif
};
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const int omap24xx_pins[][2] = {
- { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
- { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-};
-#else
-static const int omap24xx_pins[][2] = {};
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
-static const int omap34xx_pins[][2] = {
- { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
- { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
- { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
-};
-#else
-static const int omap34xx_pins[][2] = {};
-#endif
-
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-static void __init omap_i2c_mux_pins(int bus)
-{
- int scl, sda;
-
- if (cpu_class_is_omap1()) {
- scl = I2C_SCL;
- sda = I2C_SDA;
- } else if (cpu_is_omap24xx()) {
- scl = omap24xx_pins[bus][0];
- sda = omap24xx_pins[bus][1];
- } else if (cpu_is_omap34xx()) {
- scl = omap34xx_pins[bus][0];
- sda = omap34xx_pins[bus][1];
- } else {
- return;
- }
-
- omap_cfg_reg(sda);
- omap_cfg_reg(scl);
-}
-
static int __init omap_i2c_nr_ports(void)
{
int ports = 0;
@@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id)
res[1].start = irq;
}
- omap_i2c_mux_pins(bus_id - 1);
return platform_device_register(pdev);
}
@@ -209,7 +169,7 @@ out:
subsys_initcall(omap_register_i2c_bus_cmdline);
/**
- * omap_register_i2c_bus - register I2C bus with device descriptors
+ * omap_plat_register_i2c_bus - register I2C bus with device descriptors
* @bus_id: bus id counting from number 1
* @clkrate: clock rate of the bus in kHz
* @info: pointer into I2C device descriptor table or NULL
@@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
*
* Returns 0 on success or an error code.
*/
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len)
{
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 064f173..754fbc8 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,7 +27,7 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <linux/i2c.h>
+#include <plat/i2c.h>
struct sys_timer;
@@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
-{
- return 0;
-}
-#endif
/* IO bases for various OMAP processors */
struct omap_globals {
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 0000000..585d9ca
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (5 preceding siblings ...)
2009-12-03 0:22 ` [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2 Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 8/9] omap: mux: Remove old mux code for 34xx Tony Lindgren
2009-12-03 0:22 ` [PATCH 9/9] omap: mux: Add 36xx CBP package support Tony Lindgren
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Replace omap_cfg_reg() with new style signal or gpio functions
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 4 -
arch/arm/mach-omap2/board-3630sdp.c | 5 +
arch/arm/mach-omap2/board-cm-t35.c | 3
arch/arm/mach-omap2/board-omap3beagle.c | 10 +-
arch/arm/mach-omap2/board-omap3evm.c | 10 +-
arch/arm/mach-omap2/board-omap3pandora.c | 4 -
arch/arm/mach-omap2/board-overo.c | 4 -
arch/arm/mach-omap2/board-rx51-peripherals.c | 7 +
arch/arm/mach-omap2/board-rx51.c | 4 -
arch/arm/mach-omap2/devices.c | 62 +++++++---
arch/arm/mach-omap2/usb-ehci.c | 166 +++++++++++++++++---------
11 files changed, 177 insertions(+), 102 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e5d9118..ded3e87 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -626,7 +626,9 @@ static inline void board_smc91x_init(void)
static void enable_board_wakeup_source(void)
{
- omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+ /* T2 interrupt line (keypad) */
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 348b70b..e6cbc27 100755
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
+#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@@ -48,7 +49,9 @@ static inline void board_smc91x_init(void)
static void enable_board_wakeup_source(void)
{
- omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+ /* T2 interrupt line (keypad) */
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 84321f6..10a5955 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -503,7 +503,8 @@ static void __init cm_t35_init(void)
usb_musb_init();
- omap_cfg_reg(AF26_34XX_SYS_NIRQ);
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e669dbb..9e606b1 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -141,10 +141,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
- omap_cfg_reg(AG9_34XX_GPIO23);
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
- omap_cfg_reg(AH8_34XX_GPIO29);
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -439,7 +439,7 @@ static void __init omap3_beagle_init(void)
ARRAY_SIZE(omap3_beagle_devices));
omap_serial_init();
- omap_cfg_reg(J25_34XX_GPIO170);
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
@@ -449,8 +449,8 @@ static void __init omap3_beagle_init(void)
omap3beagle_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3_beagle_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ad174ae..0457f61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -224,7 +224,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_cfg_reg(L8_34XX_GPIO63);
+ omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
@@ -450,24 +450,24 @@ static void __init omap3_evm_init(void)
#endif
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
- omap_cfg_reg(AF9_34XX_GPIO22);
+ omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
- omap_cfg_reg(U3_34XX_GPIO61);
+ omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
- omap_cfg_reg(AH14_34XX_GPIO21);
+ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
ehci_pdata.reset_gpio_port[1] = 21;
} else {
/* setup EHCI phy reset on MDC */
- omap_cfg_reg(AF4_34XX_GPIO135_OUT);
+ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 9f59c03..bca5ad9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -433,8 +433,8 @@ static void __init omap3pandora_init(void)
usb_musb_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 40f3c85..1ebde4c 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -427,8 +427,8 @@ static void __init overo_init(void)
overo_init_smsc911x();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4f347f8..f903104 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -33,6 +33,7 @@
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
@@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
static void __init board_smc91x_init(void)
{
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
+ omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index c0c99ad..fd71c00 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -87,8 +87,8 @@ static void __init rx51_init(void)
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init rx51_map_io(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 733d3dc..18ad931 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,6 +27,8 @@
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include "mux.h"
+
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource cam_resources[] = {
@@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
- omap_cfg_reg(N28_3430_MMC1_CLK);
- omap_cfg_reg(M27_3430_MMC1_CMD);
- omap_cfg_reg(N27_3430_MMC1_DAT0);
+ omap_mux_init_signal("sdmmc1_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat0",
+ OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(N26_3430_MMC1_DAT1);
- omap_cfg_reg(N25_3430_MMC1_DAT2);
- omap_cfg_reg(P28_3430_MMC1_DAT3);
+ omap_mux_init_signal("sdmmc1_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat3",
+ OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(P27_3430_MMC1_DAT4);
- omap_cfg_reg(P26_3430_MMC1_DAT5);
- omap_cfg_reg(R27_3430_MMC1_DAT6);
- omap_cfg_reg(R25_3430_MMC1_DAT7);
+ omap_mux_init_signal("sdmmc1_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat7",
+ OMAP_PIN_INPUT_PULLUP);
}
}
if (controller_nr == 1) {
/* MMC2 */
- omap_cfg_reg(AE2_3430_MMC2_CLK);
- omap_cfg_reg(AG5_3430_MMC2_CMD);
- omap_cfg_reg(AH5_3430_MMC2_DAT0);
+ omap_mux_init_signal("sdmmc2_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat0",
+ OMAP_PIN_INPUT_PULLUP);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
@@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(AH4_3430_MMC2_DAT1);
- omap_cfg_reg(AG4_3430_MMC2_DAT2);
- omap_cfg_reg(AF4_3430_MMC2_DAT3);
+ omap_mux_init_signal("sdmmc2_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat3",
+ OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(AE4_3430_MMC2_DAT4);
- omap_cfg_reg(AH3_3430_MMC2_DAT5);
- omap_cfg_reg(AF3_3430_MMC2_DAT6);
- omap_cfg_reg(AE3_3430_MMC2_DAT7);
+ omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+ OMAP_PIN_INPUT_PULLUP);
}
}
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index e448abd..f1df873 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -27,6 +27,8 @@
#include <mach/irqs.h>
#include <plat/usb.h>
+#include "mux.h"
+
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static struct resource ehci_resources[] = {
@@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
{
switch (port_mode[0]) {
case EHCI_HCD_OMAP_MODE_PHY:
- omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
- omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
- omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
- omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
- omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
- omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
- omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
- omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
- omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
- omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
- omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
- omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
+ omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
- omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
- omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
- omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
- omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
- omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
- omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
- omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
- omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
- omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
- omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
- omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb1_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb1_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
switch (port_mode[1]) {
case EHCI_HCD_OMAP_MODE_PHY:
- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
+ omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
- omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
- omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
- omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
- omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
- omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
- omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
- omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
- omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
- omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
- omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
- omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb2_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb2_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
- omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
- omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
- omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
- omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
- omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
- omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
- omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
- omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
- omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
- omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
- omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb3_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb3_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 8/9] omap: mux: Remove old mux code for 34xx
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (6 preceding siblings ...)
2009-12-03 0:22 ` [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
2009-12-03 0:22 ` [PATCH 9/9] omap: mux: Add 36xx CBP package support Tony Lindgren
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Remove old mux code for 34xx
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 1
arch/arm/mach-omap2/board-cm-t35.c | 1
arch/arm/mach-omap2/board-igep0020.c | 1
arch/arm/mach-omap2/board-omap3beagle.c | 1
arch/arm/mach-omap2/board-omap3evm.c | 1
arch/arm/mach-omap2/board-omap3pandora.c | 1
arch/arm/mach-omap2/board-overo.c | 1
arch/arm/mach-omap2/board-rx51.c | 1
arch/arm/mach-omap2/io.c | 1
arch/arm/mach-omap2/mux.c | 368 +-----------------------------
arch/arm/plat-omap/include/plat/mux.h | 226 ------------------
11 files changed, 14 insertions(+), 589 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ded3e87..4cfb7b6 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -31,7 +31,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 10a5955..507c922 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -38,7 +38,6 @@
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/mux.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7e3217a..44239e3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -27,7 +27,6 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 9e606b1..6ada802 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,7 +41,6 @@
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0457f61..18913e9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -38,7 +38,6 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index bca5ad9..c1cc99c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,7 +40,6 @@
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
-#include <plat/mux.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 1ebde4c..5b78a87 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -44,7 +44,6 @@
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index fd71c00..67bb347 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -23,7 +23,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6a4d8e4..b632ea0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -34,6 +34,7 @@
#include <plat/gpmc.h>
#include <plat/serial.h>
#include <plat/vram.h>
+#include <plat/mux.h>
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index d968433..e071b3f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -67,13 +67,12 @@ static inline void omap_mux_write(u16 val, u16 reg)
__raw_writew(val, mux_base + reg);
}
-#ifdef CONFIG_OMAP_MUX
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
/* NOTE: See mux.h for the enumeration */
-#ifdef CONFIG_ARCH_OMAP24XX
static struct pin_config __initdata_or_module omap24xx_pins[] = {
/*
* description mux mux pull pull debug
@@ -283,333 +282,8 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1)
#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins)
-#else
-#define omap24xx_pins NULL
-#define OMAP24XX_PINS_SZ 0
-#endif /* CONFIG_ARCH_OMAP24XX */
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static struct pin_config __initdata_or_module omap34xx_pins[] = {
-/*
- * Name, reg-offset,
- * mux-mode | [active-mode | off-mode]
- */
-
-/* 34xx I2C */
-MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 3*/
-MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-
-
-/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
- * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
- * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
- */
-MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-
-/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-
-/* MMC1 */
-MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC2 */
-MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC3 */
-MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* SYS_NIRQ T2 INT1 */
-MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
- OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
- OMAP34XX_MUX_MODE0)
-/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
-MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-};
-
-#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
-
-#else
-#define omap34xx_pins NULL
-#define OMAP34XX_PINS_SZ 0
-#endif /* CONFIG_ARCH_OMAP34XX */
-
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+
static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
{
u16 orig;
@@ -631,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
#define omap2_cfg_debug(x, y) do {} while (0)
#endif
-#ifdef CONFIG_ARCH_OMAP24XX
static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
{
static DEFINE_SPINLOCK(mux_spin_lock);
@@ -650,28 +323,6 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
return 0;
}
-#else
-#define omap24xx_cfg_reg NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
-{
- static DEFINE_SPINLOCK(mux_spin_lock);
- unsigned long flags;
- u16 reg = 0;
-
- spin_lock_irqsave(&mux_spin_lock, flags);
- reg |= cfg->mux_val;
- omap2_cfg_debug(cfg, reg);
- omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
- spin_unlock_irqrestore(&mux_spin_lock, flags);
-
- return 0;
-}
-#else
-#define omap34xx_cfg_reg NULL
-#endif
int __init omap2_mux_init(void)
{
@@ -694,21 +345,23 @@ int __init omap2_mux_init(void)
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
- } else if (cpu_is_omap34xx()) {
- arch_mux_cfg.pins = omap34xx_pins;
- arch_mux_cfg.size = OMAP34XX_PINS_SZ;
- arch_mux_cfg.cfg_reg = omap34xx_cfg_reg;
+
+ return omap_mux_register(&arch_mux_cfg);
}
- return omap_mux_register(&arch_mux_cfg);
+ return 0;
}
+#else
+int __init omap2_mux_init(void)
+{
+ return 0;
+}
#endif /* CONFIG_OMAP_MUX */
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP34XX
-
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
@@ -1353,3 +1006,4 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
}
#endif /* CONFIG_ARCH_OMAP34XX */
+
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index ba77de6..6067cf7 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -130,58 +130,11 @@
#define OMAP2_PULL_UP (1 << 4)
#define OMAP2_ALTELECTRICALSEL (1 << 5)
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN (1 << 8)
-#define OMAP3_OFF_EN (1 << 9)
-#define OMAP3_OFFOUT_EN (1 << 10)
-#define OMAP3_OFFOUT_VAL (1 << 11)
-#define OMAP3_OFF_PULL_EN (1 << 12)
-#define OMAP3_OFF_PULL_UP (1 << 13)
-#define OMAP3_WAKEUP_EN (1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define OMAP34XX_MUX_MODE0 0
-#define OMAP34XX_MUX_MODE1 1
-#define OMAP34XX_MUX_MODE2 2
-#define OMAP34XX_MUX_MODE3 3
-#define OMAP34XX_MUX_MODE4 4
-#define OMAP34XX_MUX_MODE5 5
-#define OMAP34XX_MUX_MODE6 6
-#define OMAP34XX_MUX_MODE7 7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT 0
-#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
- | OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE 0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
- | OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
- | OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
- .name = desc, \
- .debug = 0, \
- .mux_reg = reg_offset, \
- .mux_val = mux_value \
-},
-
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
-#if defined(CONFIG_ARCH_OMAP34XX)
- u16 mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
@@ -681,181 +634,6 @@ enum omap24xx_index {
};
-enum omap34xx_index {
- /* 34xx I2C */
- K21_34XX_I2C1_SCL,
- J21_34XX_I2C1_SDA,
- AF15_34XX_I2C2_SCL,
- AE15_34XX_I2C2_SDA,
- AF14_34XX_I2C3_SCL,
- AG14_34XX_I2C3_SDA,
- AD26_34XX_I2C4_SCL,
- AE26_34XX_I2C4_SDA,
-
- /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
- Y8_3430_USB1HS_PHY_CLK,
- Y9_3430_USB1HS_PHY_STP,
- AA14_3430_USB1HS_PHY_DIR,
- AA11_3430_USB1HS_PHY_NXT,
- W13_3430_USB1HS_PHY_DATA0,
- W12_3430_USB1HS_PHY_DATA1,
- W11_3430_USB1HS_PHY_DATA2,
- Y11_3430_USB1HS_PHY_DATA3,
- W9_3430_USB1HS_PHY_DATA4,
- Y12_3430_USB1HS_PHY_DATA5,
- W8_3430_USB1HS_PHY_DATA6,
- Y13_3430_USB1HS_PHY_DATA7,
-
- /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
- AA8_3430_USB2HS_PHY_CLK,
- AA10_3430_USB2HS_PHY_STP,
- AA9_3430_USB2HS_PHY_DIR,
- AB11_3430_USB2HS_PHY_NXT,
- AB10_3430_USB2HS_PHY_DATA0,
- AB9_3430_USB2HS_PHY_DATA1,
- W3_3430_USB2HS_PHY_DATA2,
- T4_3430_USB2HS_PHY_DATA3,
- T3_3430_USB2HS_PHY_DATA4,
- R3_3430_USB2HS_PHY_DATA5,
- R4_3430_USB2HS_PHY_DATA6,
- T2_3430_USB2HS_PHY_DATA7,
-
-
- /* TLL - HSUSB: 12-pin TLL Port 1*/
- Y8_3430_USB1HS_TLL_CLK,
- Y9_3430_USB1HS_TLL_STP,
- AA14_3430_USB1HS_TLL_DIR,
- AA11_3430_USB1HS_TLL_NXT,
- W13_3430_USB1HS_TLL_DATA0,
- W12_3430_USB1HS_TLL_DATA1,
- W11_3430_USB1HS_TLL_DATA2,
- Y11_3430_USB1HS_TLL_DATA3,
- W9_3430_USB1HS_TLL_DATA4,
- Y12_3430_USB1HS_TLL_DATA5,
- W8_3430_USB1HS_TLL_DATA6,
- Y13_3430_USB1HS_TLL_DATA7,
-
- /* TLL - HSUSB: 12-pin TLL Port 2*/
- AA8_3430_USB2HS_TLL_CLK,
- AA10_3430_USB2HS_TLL_STP,
- AA9_3430_USB2HS_TLL_DIR,
- AB11_3430_USB2HS_TLL_NXT,
- AB10_3430_USB2HS_TLL_DATA0,
- AB9_3430_USB2HS_TLL_DATA1,
- W3_3430_USB2HS_TLL_DATA2,
- T4_3430_USB2HS_TLL_DATA3,
- T3_3430_USB2HS_TLL_DATA4,
- R3_3430_USB2HS_TLL_DATA5,
- R4_3430_USB2HS_TLL_DATA6,
- T2_3430_USB2HS_TLL_DATA7,
-
- /* TLL - HSUSB: 12-pin TLL Port 3*/
- AA6_3430_USB3HS_TLL_CLK,
- AB3_3430_USB3HS_TLL_STP,
- AA3_3430_USB3HS_TLL_DIR,
- Y3_3430_USB3HS_TLL_NXT,
- AA5_3430_USB3HS_TLL_DATA0,
- Y4_3430_USB3HS_TLL_DATA1,
- Y5_3430_USB3HS_TLL_DATA2,
- W5_3430_USB3HS_TLL_DATA3,
- AB12_3430_USB3HS_TLL_DATA4,
- AB13_3430_USB3HS_TLL_DATA5,
- AA13_3430_USB3HS_TLL_DATA6,
- AA12_3430_USB3HS_TLL_DATA7,
-
- /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
- AF10_3430_USB1FS_PHY_MM1_RXDP,
- AG9_3430_USB1FS_PHY_MM1_RXDM,
- W13_3430_USB1FS_PHY_MM1_RXRCV,
- W12_3430_USB1FS_PHY_MM1_TXSE0,
- W11_3430_USB1FS_PHY_MM1_TXDAT,
- Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
- /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
- AF7_3430_USB2FS_PHY_MM2_RXDP,
- AH7_3430_USB2FS_PHY_MM2_RXDM,
- AB10_3430_USB2FS_PHY_MM2_RXRCV,
- AB9_3430_USB2FS_PHY_MM2_TXSE0,
- W3_3430_USB2FS_PHY_MM2_TXDAT,
- T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
- /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
- AH3_3430_USB3FS_PHY_MM3_RXDP,
- AE3_3430_USB3FS_PHY_MM3_RXDM,
- AD1_3430_USB3FS_PHY_MM3_RXRCV,
- AE1_3430_USB3FS_PHY_MM3_TXSE0,
- AD2_3430_USB3FS_PHY_MM3_TXDAT,
- AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
- /* 34xx GPIO
- * - normally these are bidirectional, no internal pullup/pulldown
- * - "_UP" suffix (GPIO3_UP) if internal pullup is configured
- * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
- * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
- */
- AF26_34XX_GPIO0,
- AF22_34XX_GPIO9,
- AG9_34XX_GPIO23,
- AH8_34XX_GPIO29,
- U8_34XX_GPIO54_OUT,
- U8_34XX_GPIO54_DOWN,
- L8_34XX_GPIO63,
- G25_34XX_GPIO86_OUT,
- AG4_34XX_GPIO134_OUT,
- AF4_34XX_GPIO135_OUT,
- AE4_34XX_GPIO136_OUT,
- AF6_34XX_GPIO140_UP,
- AE6_34XX_GPIO141,
- AF5_34XX_GPIO142,
- AE5_34XX_GPIO143,
- H19_34XX_GPIO164_OUT,
- J25_34XX_GPIO170,
-
- /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
- H16_34XX_SDRC_CKE0,
- H17_34XX_SDRC_CKE1,
-
- /* MMC1 */
- N28_3430_MMC1_CLK,
- M27_3430_MMC1_CMD,
- N27_3430_MMC1_DAT0,
- N26_3430_MMC1_DAT1,
- N25_3430_MMC1_DAT2,
- P28_3430_MMC1_DAT3,
- P27_3430_MMC1_DAT4,
- P26_3430_MMC1_DAT5,
- R27_3430_MMC1_DAT6,
- R25_3430_MMC1_DAT7,
-
- /* MMC2 */
- AE2_3430_MMC2_CLK,
- AG5_3430_MMC2_CMD,
- AH5_3430_MMC2_DAT0,
- AH4_3430_MMC2_DAT1,
- AG4_3430_MMC2_DAT2,
- AF4_3430_MMC2_DAT3,
- AE4_3430_MMC2_DAT4,
- AH3_3430_MMC2_DAT5,
- AF3_3430_MMC2_DAT6,
- AE3_3430_MMC2_DAT7,
-
- /* MMC3 */
- AF10_3430_MMC3_CLK,
- AC3_3430_MMC3_CMD,
- AE11_3430_MMC3_DAT0,
- AH9_3430_MMC3_DAT1,
- AF13_3430_MMC3_DAT2,
- AF13_3430_MMC3_DAT3,
-
- /* SYS_NIRQ T2 INT1 */
- AF26_34XX_SYS_NIRQ,
-
- /* EHCI GPIO's for OMAP3EVM (Rev >= E) */
- AH14_34XX_GPIO21,
- AF9_34XX_GPIO22,
- U3_34XX_GPIO61,
-};
-
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
@@ -865,14 +643,14 @@ struct omap_mux_cfg {
#ifdef CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
extern int omap_mux_register(struct omap_mux_cfg *);
extern int omap_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
+extern int omap2_mux_init(void);
+
#endif
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 9/9] omap: mux: Add 36xx CBP package support
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
` (7 preceding siblings ...)
2009-12-03 0:22 ` [PATCH 8/9] omap: mux: Remove old mux code for 34xx Tony Lindgren
@ 2009-12-03 0:22 ` Tony Lindgren
8 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2009-12-03 0:22 UTC (permalink / raw)
To: linux-arm-kernel
Add 36xx CBP package support
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 5
arch/arm/mach-omap2/board-3630sdp.c | 9 +
arch/arm/mach-omap2/board-zoom3.c | 10 +
arch/arm/mach-omap2/mux.h | 1
arch/arm/mach-omap2/mux34xx.c | 520 +++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux34xx.h | 42 +++
6 files changed, 587 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c10789c..5a61b74 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -33,6 +33,9 @@ config OMAP_PACKAGE_CBB
config OMAP_PACKAGE_CUS
bool
+config OMAP_PACKAGE_CBP
+ bool
+
comment "OMAP Board Type"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
@@ -121,6 +124,7 @@ config MACH_OMAP_ZOOM2
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBP
config MACH_CM_T35
bool "CompuLab CM-T35 module"
@@ -135,6 +139,7 @@ config MACH_IGEP0020
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBP
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e6cbc27..7390596 100755
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -85,8 +85,17 @@ static void __init omap_sdp_init_irq(void)
omap_gpio_init();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_sdp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 8d965a6..a9fe918 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -21,6 +21,7 @@
#include <plat/common.h>
#include <plat/board.h>
+#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
static void __init omap_zoom_map_io(void)
@@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void)
omap_gpio_init();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_zoom_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
zoom_debugboard_init();
}
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index a6bd58f..d8b4d5a 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -56,6 +56,7 @@
/* Flags for omap_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
+#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */
#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 116d5b2..68e0a59 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -1549,6 +1549,522 @@ struct omap_ball __initdata omap3_cbb_ball[] = {
#define omap3_cbb_ball NULL
#endif
+/*
+ * Signals different on 36XX CBP package comapared to 34XX CBC package
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
+struct omap_mux __initdata omap36xx_cbp_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D0, 99,
+ "cam_d0", NULL, "csi2_dx2", NULL,
+ "gpio_99", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D1, 100,
+ "cam_d1", NULL, "csi2_dy2", NULL,
+ "gpio_100", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", "ssi2_wake", NULL, NULL,
+ "gpio_109", "hw_dbg8", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", "ssi2_rdy_tx", NULL, NULL,
+ "gpio_101", "hw_dbg4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", "ssi2_dat_rx", NULL, NULL,
+ "gpio_102", "hw_dbg5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", "ssi2_flag_rx", NULL, NULL,
+ "gpio_103", "hw_dbg6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", "ssi2_rdy_rx", NULL, NULL,
+ "gpio_104", "hw_dbg7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", "ssi2_dat_tx", NULL, NULL,
+ "gpio_94", "hw_dbg0", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", "ssi2_flag_tx", NULL, NULL,
+ "gpio_95", "hw_dbg1", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA0, 70,
+ "dss_data0", "dsi_dx0", "uart1_cts", NULL,
+ "gpio_70", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA1, 71,
+ "dss_data1", "dsi_dy0", "uart1_rts", NULL,
+ "gpio_71", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA2, 72,
+ "dss_data2", "dsi_dx1", NULL, NULL,
+ "gpio_72", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA3, 73,
+ "dss_data3", "dsi_dy1", NULL, NULL,
+ "gpio_73", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA4, 74,
+ "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
+ "gpio_74", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA5, 75,
+ "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
+ "gpio_75", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
+ "gpio_76", "hw_dbg14", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
+ "gpio_77", "hw_dbg15", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, "uart3_rx_irrx", NULL,
+ "gpio_78", "hw_dbg16", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, "uart3_tx_irtx", NULL,
+ "gpio_79", "hw_dbg17", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ "gpmc_a11", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+ "gpmc_wait2", NULL, "uart4_tx", NULL,
+ "gpio_64", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+ "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
+ "gpio_65", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+ "hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+ "gpio_125", "uart2_tx", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+ "hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+ "gpio_130", "uart2_rx", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+ "hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+ "gpio_131", "uart2_rts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+ "hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+ "gpio_169", "uart2_cts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+ "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
+ "gpio_156", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+ "mcbsp1_fsr", "adpllv2d_dithering_en1",
+ "cam_global_reset", NULL,
+ "gpio_157", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+ "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
+ "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DR, 153,
+ "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
+ "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DX, 154,
+ "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
+ "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+ "mcbsp4_fsx", "ssi1_wake", NULL, NULL,
+ "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+ "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
+ "gpio_175", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+ "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+ "sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+ "sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+ "sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+ "sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+ "sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+ "sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+ "sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+ "sad2d_mread", "mad2d_sread", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+ "sad2d_mwrite", "mad2d_swrite", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+ "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+ "sad2d_sread", "mad2d_mread", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+ "sad2d_swrite", "mad2d_mwrite", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+ "sdmmc1_clk", "ms_clk", NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+ "sdmmc1_cmd", "ms_bs", NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+ "sdmmc1_dat0", "ms_dat0", NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+ "sdmmc1_dat1", "ms_dat1", NULL, NULL,
+ "gpio_123", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+ "sdmmc1_dat2", "ms_dat2", NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+ "sdmmc1_dat3", "ms_dat3", NULL, NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE0, 0,
+ "sdrc_cke0", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode_out1"),
+ _OMAP3_MUXENTRY(SDRC_CKE1, 0,
+ "sdrc_cke1", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode_out1"),
+ _OMAP3_MUXENTRY(SIM_IO, 126,
+ "sim_io", "sim_io_low_impedance", NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_CLK, 127,
+ "sim_clk", NULL, NULL, NULL,
+ "gpio_127", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
+ "sim_pwrctrl", NULL, NULL, NULL,
+ "gpio_128", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_RST, 129,
+ "sim_rst", NULL, NULL, NULL,
+ "gpio_129", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT0, 2,
+ "sys_boot0", NULL, NULL, "dss_data18",
+ "gpio_2", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT1, 3,
+ "sys_boot1", NULL, NULL, "dss_data19",
+ "gpio_3", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT3, 5,
+ "sys_boot3", NULL, NULL, "dss_data20",
+ "gpio_5", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT4, 6,
+ "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
+ "gpio_6", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT5, 7,
+ "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
+ "gpio_7", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT6, 8,
+ "sys_boot6", NULL, NULL, "dss_data23",
+ "gpio_8", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
+ "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RTS, 149,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
+ "gpio_149", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_TX, 148,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
+ "gpio_148", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_subset NULL
+#endif
+
+/*
+ * Balls for 36XX CBP package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined (CONFIG_OMAP_PACKAGE_CBP)
+struct omap_ball __initdata omap36xx_cbp_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+ _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+ _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
+ _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+ _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+ _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+ _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+ _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+ _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+ _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+ _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+ _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+ _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
+ _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
+ _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+ _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+ _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+ _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+ _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+ _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+ _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
+ _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
+ _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
+ _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
+ _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
+ _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
+ _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+ _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+ _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
+ _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
+ _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+ _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
+ _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+ _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
+ _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
+ _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
+ _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
+ _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+ _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
+ _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
+ _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
+ _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
+ _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
+ _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
+ _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
+ _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
+ _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
+ _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
+ _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
+ _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
+ _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
+ _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
+ _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
+ _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
+ _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
+ _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
+ _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
+ _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
+ _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
+ _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
+ _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
+ _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
+ _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
+ _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
+ _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
+ _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
+ _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
+ _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
+ _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
+ _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
+ _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
+ _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
+ _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
+ _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
+ _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
+ _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
+ _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
+ _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
+ _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
+ _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
+ _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
+ _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
+ _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
+ _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
+ _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
+ _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
+ _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
+ _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
+ _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
+ _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
+ _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
+ _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
+ _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
+ _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
+ _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
+ _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
+ _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
+ _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
+ _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
+ _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
+ _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
+ _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
+ _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
+ _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
+ _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
+ _OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
+ _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
+ _OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
+ _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_ball NULL
+#endif
+
int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
{
struct omap_mux *package_subset;
@@ -1567,6 +2083,10 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
package_subset = omap3_cus_subset;
package_balls = omap3_cus_ball;
break;
+ case (OMAP_PACKAGE_CBP):
+ package_subset = omap36xx_cbp_subset;
+ package_balls = omap36xx_cbp_ball;
+ break;
default:
printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
return -EINVAL;
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
index a7cc871..6543ebf 100644
--- a/arch/arm/mach-omap2/mux34xx.h
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -170,10 +170,13 @@
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e
+
+/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126
+
#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128
#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c
@@ -281,6 +284,7 @@
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc
+
/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe
#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200
@@ -302,6 +306,7 @@
#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220
#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222
#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224
+
#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226
#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228
#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a
@@ -310,6 +315,43 @@
#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230
#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232
#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234
+
+/* 36xx only */
+#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236
+#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570
+#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572
+#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574
+#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576
+#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578
+#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a
+#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c
+#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e
+#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580
+#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582
+#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584
+#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586
+#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588
+#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a
+#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c
+#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e
+#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594
+#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596
+#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598
+#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a
+#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c
+#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e
+#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0
+#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2
+#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4
+
+/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
+#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120
+#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122
+#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124
+#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126
+
#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8
#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa
#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-12-03 0:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
2009-12-03 0:21 ` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren
2009-12-03 0:21 ` [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3 Tony Lindgren
2009-12-03 0:21 ` [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx Tony Lindgren
2009-12-03 0:22 ` [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files Tony Lindgren
2009-12-03 0:22 ` [PATCH 5/9] omap: mux: Add debugfs support for new mux code Tony Lindgren
2009-12-03 0:22 ` [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2 Tony Lindgren
2009-12-03 0:22 ` [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Tony Lindgren
2009-12-03 0:22 ` [PATCH 8/9] omap: mux: Remove old mux code for 34xx Tony Lindgren
2009-12-03 0:22 ` [PATCH 9/9] omap: mux: Add 36xx CBP package support Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).