From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files
Date: Wed, 02 Dec 2009 16:22:00 -0800 [thread overview]
Message-ID: <20091203002200.2769.87237.stgit@localhost> (raw)
In-Reply-To: <20091203001601.2769.20621.stgit@localhost>
Add new style mux init functions to omap3 board-*.c files
So far Beagle has been confirmed to be a CBB package,
and CM-T35 a CUS package.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 10 ++++++++++
arch/arm/mach-omap2/board-3430sdp.c | 10 ++++++++++
arch/arm/mach-omap2/board-am3517evm.c | 11 +++++++++++
arch/arm/mach-omap2/board-cm-t35.c | 10 ++++++++++
arch/arm/mach-omap2/board-igep0020.c | 10 ++++++++++
arch/arm/mach-omap2/board-ldp.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3beagle.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++++
arch/arm/mach-omap2/board-omap3pandora.c | 10 ++++++++++
arch/arm/mach-omap2/board-overo.c | 9 +++++++++
arch/arm/mach-omap2/board-rx51.c | 11 +++++++++++
arch/arm/mach-omap2/board-zoom2.c | 10 ++++++++++
12 files changed, 121 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c324d52..c10789c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -61,14 +61,17 @@ config MACH_OMAP_2430SDP
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
@@ -77,14 +80,17 @@ config MACH_OMAP3EVM
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_NOKIA_N800
bool
@@ -105,10 +111,12 @@ config MACH_NOKIA_N8X0
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -117,10 +125,12 @@ config MACH_OMAP_ZOOM3
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CUS
config MACH_IGEP0020
bool "IGEP0020"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 5bda9fd..e5d9118 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -42,6 +42,7 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
@@ -640,8 +641,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_3430sdp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
if (omap_rev() > OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 415a13d..b4e6eca 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -30,6 +30,8 @@
#include <plat/common.h>
#include <plat/usb.h>
+#include "mux.h"
+
/*
* Board initialization
*/
@@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init am3517_evm_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 22c4529..84321f6 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void)
omap2_map_common_io();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init cm_t35_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index fa62e80..7e3217a 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define IGEP2_SMSC911X_CS 5
@@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void)
return 0;
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init igep2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
omap_serial_init();
usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c062238..3743173 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -43,6 +43,7 @@
#include <plat/control.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define LDP_SMSC911X_CS 1
@@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = {
&ldp_gpio_keys_device,
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_ldp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
ts_gpio = 54;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 41480bd..e669dbb 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -45,6 +45,7 @@
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define GPMC_CS0_BASE 0x60
@@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_beagle_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5efc2e9..ad174ae 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_evm_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2db5ba5..9f59c03 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -42,6 +42,7 @@
#include <plat/usb.h>
#include <plat/mux.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3pandora_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52dfd51..40f3c85 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -47,6 +47,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
static void __init overo_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1bb1de2..c0c99ad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -30,6 +30,8 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include "mux.h"
+
struct omap_sdrc_params *rx51_get_sdram_timings(void);
static struct omap_lcd_config rx51_lcd_config = {
@@ -69,8 +71,17 @@ static void __init rx51_init_irq(void)
extern void __init rx51_peripherals_init(void);
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init rx51_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 2f980e3..1e615e2 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
static void __init omap_zoom2_init_irq(void)
@@ -58,8 +59,17 @@ static struct twl4030_platform_data zoom2_twldata = {
#endif
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_zoom2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
zoom_debugboard_init();
}
next prev parent reply other threads:[~2009-12-03 0:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-03 0:21 [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2 Tony Lindgren
2009-12-03 0:21 ` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren
2009-12-03 0:21 ` [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3 Tony Lindgren
2009-12-03 0:21 ` [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx Tony Lindgren
2009-12-03 0:22 ` Tony Lindgren [this message]
2009-12-03 0:22 ` [PATCH 5/9] omap: mux: Add debugfs support for new mux code Tony Lindgren
2009-12-03 0:22 ` [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2 Tony Lindgren
2009-12-03 0:22 ` [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Tony Lindgren
2009-12-03 0:22 ` [PATCH 8/9] omap: mux: Remove old mux code for 34xx Tony Lindgren
2009-12-03 0:22 ` [PATCH 9/9] omap: mux: Add 36xx CBP package support Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091203002200.2769.87237.stgit@localhost \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).