[RFC][PATCH 01/10] arm: mxc: New interrupt controller (TZIC) for i.MX5 family

[u.kleine-koenig@pengutronix.de (Uwe Kleine-König)]

Hi,

On Fri, Dec 04, 2009 at 04:47:01AM +0200, Amit Kucheria wrote:
> Freescale i.MX51 processor uses a different interrupt controller. Add the
> driver and fix the Makefile to account for it.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
> ---
>  arch/arm/plat-mxc/Kconfig  |    4 +
>  arch/arm/plat-mxc/Makefile |    9 ++-
>  arch/arm/plat-mxc/tzic.c   |  180 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 192 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/tzic.c
> 
> diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
> index ca5c7c2..11bf691 100644
> --- a/arch/arm/plat-mxc/Kconfig
> +++ b/arch/arm/plat-mxc/Kconfig
> @@ -75,4 +75,8 @@ config ARCH_HAS_RNGA
>  
>  config ARCH_MXC_IOMUX_V3
>  	bool
> +
> +config MXC_TZIC
> +	bool
> +	depends on ARCH_MXC
>  endif
The whole file arch/arm/plat-mxc/Kconfig is a big 

	if ARCH_MXC
	...
	endif

so there is no need for "depends on ARCH_MXC"

> diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
> index e3212c8..5be53ca 100644
> --- a/arch/arm/plat-mxc/Makefile
> +++ b/arch/arm/plat-mxc/Makefile
> @@ -3,7 +3,14 @@
>  #
>  
>  # Common support
> -obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
> +obj-y := clock.o gpio.o time.o devices.o cpu.o system.o
> +
> +# MX51 uses the TZIC interrupt controller, older platforms use AVIC
> +ifeq ($(CONFIG_MXC_TZIC),y)
> +obj-y += tzic.o
> +else
> +obj-y += irq.o
> +endif
We're not there yet, but in the future we want to build kernel images
that run on (say) imx51 and imx27.  In such a kernel we'd need irq.o
*and* tzic.o.  So don't kick out irq.o when CONFIG_MXC_TZIC but make
that dependant on the other SOCs.

> diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
> new file mode 100644
> index 0000000..3af8fc6
> --- /dev/null
> +++ b/arch/arm/plat-mxc/tzic.c
> [...]
> +static void mxc_mask_irq(unsigned int irq)
please add a namespace for these functions.  There is already a function
mxc_mask_irq.  Giving the same name twice is possible but makes the code
harder to understand.

> [...]
> + * @param is_idle		1 if called in idle loop (enset registers);
s/enset/unset/ ?

Best regards
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-K?nig            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |