* MXC: MC13783 Voltage regulation full support
@ 2009-12-07 15:16 Alberto Panizzo
2009-12-07 18:22 ` Uwe Kleine-König
0 siblings, 1 reply; 3+ messages in thread
From: Alberto Panizzo @ 2009-12-07 15:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi! I am working on imx31pdk board support.
This board use strongly the power management chip Freescale MC13783
to set and enable power supply to devices, so a complete regulator
driver for this chip is needed.
I ask you, anyone is working on this task now?
Or are there some problems pending that explain why the present driver
can only enable or disable regulators?
Alberto!
^ permalink raw reply [flat|nested] 3+ messages in thread
* MXC: MC13783 Voltage regulation full support
2009-12-07 15:16 MXC: MC13783 Voltage regulation full support Alberto Panizzo
@ 2009-12-07 18:22 ` Uwe Kleine-König
2009-12-07 18:30 ` Mark Brown
0 siblings, 1 reply; 3+ messages in thread
From: Uwe Kleine-König @ 2009-12-07 18:22 UTC (permalink / raw)
To: linux-arm-kernel
Hello Alberto,
On Mon, Dec 07, 2009 at 04:16:57PM +0100, Alberto Panizzo wrote:
> Hi! I am working on imx31pdk board support.
>
> This board use strongly the power management chip Freescale MC13783
> to set and enable power supply to devices, so a complete regulator
> driver for this chip is needed.
>
> I ask you, anyone is working on this task now?
>
> Or are there some problems pending that explain why the present driver
> can only enable or disable regulators?
I think the only problem was that Sascha havn't had the need for full
regulators and so didn't invest the time. Note that the driver changed
in next if you plan to send patches.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 3+ messages in thread
* MXC: MC13783 Voltage regulation full support
2009-12-07 18:22 ` Uwe Kleine-König
@ 2009-12-07 18:30 ` Mark Brown
0 siblings, 0 replies; 3+ messages in thread
From: Mark Brown @ 2009-12-07 18:30 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 07, 2009 at 07:22:29PM +0100, Uwe Kleine-K?nig wrote:
> On Mon, Dec 07, 2009 at 04:16:57PM +0100, Alberto Panizzo wrote:
> > Or are there some problems pending that explain why the present driver
> > can only enable or disable regulators?
> I think the only problem was that Sascha havn't had the need for full
> regulators and so didn't invest the time. Note that the driver changed
> in next if you plan to send patches.
The hardware can certainly work with the API, the Freescale drivers have
done so for a while.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-12-07 18:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-07 15:16 MXC: MC13783 Voltage regulation full support Alberto Panizzo
2009-12-07 18:22 ` Uwe Kleine-König
2009-12-07 18:30 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox