From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: GPIO support for HTC Dream
Date: Thu, 10 Dec 2009 17:26:45 +0100 [thread overview]
Message-ID: <20091210162645.GG19454@elf.ucw.cz> (raw)
In-Reply-To: <4B1ECAC2.5090009@bluewatersys.com>
Hi!
> >>> +#define DREAM_INT_TO_BANK(n) ((n - DREAM_INT_START) / DREAM_INT_BANK0_COUNT)
> >>> +#define DREAM_INT_TO_MASK(n) (1U << ((n - DREAM_INT_START) & 7))
> >>> +#define DREAM_BANK_TO_MASK_REG(bank) \
> >>> + (bank ? DREAM_GPIO_INT_MASK1_REG : DREAM_GPIO_INT_MASK0_REG)
> >>> +#define DREAM_BANK_TO_STAT_REG(bank) \
> >>> + (bank ? DREAM_GPIO_INT_STAT1_REG : DREAM_GPIO_INT_STAT0_REG)
> >> Are these needed outside of the gpiolib code? If not, they should be
> >> moved there. I also think they should have lower case names since they
> >> act like a function, and make the code where they are used nicer to
> >> read.
> >
> > I guess these logically belong here.
> >
> > No, macros are macros, that means upcase.
>
> container_of, min, swap, etc are macros too. It is easier to read this
> if they are lower case because they are typically used for initialising
> variables, ie:
>
> int bank = dream_int_to_bank(irq);
>
> Is easier (IMHO) to read than:
>
> int bank = DREAM_INT_TO_BANK(irq);
I disagree here. I could convert it to inline function, but I guess it
is okay as it is.
> > static void __init dream_init(void)
> > {
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 1);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 0);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 1);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 0);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 1);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 0);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 1);
> > + mdelay(300);
> > + gpio_set_value(DREAM_GPIO_UI_LED_EN, 0);
> > + mdelay(300);
> > +
>
> Indentation looks screwy here. Also, is this meant to blink the leds?
> There is a 2.4 second hard delay here, which is horrible.
Yep, that was my debugging code, not meant for upstream. And yes, its
blinking.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2009-12-10 16:26 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 10:28 GPIO support for HTC Dream Pavel Machek
2009-12-08 20:22 ` Ryan Mallon
2009-12-08 21:37 ` Pavel Machek
2009-12-08 21:53 ` Ryan Mallon
2009-12-10 16:26 ` Pavel Machek [this message]
2009-12-08 21:56 ` Arve Hjønnevåg
2009-12-09 11:32 ` Pavel Machek
2009-12-08 21:46 ` Pavel Machek
2009-12-08 22:03 ` Joe Perches
2009-12-09 11:46 ` Pavel Machek
2009-12-08 22:10 ` Ryan Mallon
2009-12-09 23:40 ` Ryan Mallon
2009-12-10 17:24 ` Pavel Machek
2009-12-10 17:41 ` Mark Brown
2009-12-10 19:49 ` Ryan Mallon
2009-12-10 23:14 ` H Hartley Sweeten
2009-12-11 19:58 ` Pavel Machek
2009-12-11 22:10 ` Pavel Machek
2009-12-11 22:40 ` Arve Hjønnevåg
2009-12-11 23:12 ` H Hartley Sweeten
2009-12-16 22:53 ` Pavel Machek
2009-12-16 23:03 ` Daniel Walker
2009-12-11 23:04 ` H Hartley Sweeten
2009-12-14 6:45 ` Pavel Machek
2009-12-14 17:54 ` Daniel Walker
2009-12-14 18:12 ` H Hartley Sweeten
2009-12-15 6:40 ` Arve Hjønnevåg
2009-12-15 19:12 ` Pavel Machek
2009-12-15 20:07 ` Daniel Walker
2009-12-15 21:21 ` Pavel Machek
2009-12-15 20:48 ` Jamie Lokier
2009-12-15 21:07 ` Brian Swetland
2009-12-14 19:00 ` H Hartley Sweeten
2009-12-15 19:47 ` Pavel Machek
2009-12-15 20:15 ` H Hartley Sweeten
2009-12-15 20:47 ` Pavel Machek
2009-12-15 21:16 ` [patch] " Pavel Machek
2009-12-25 17:10 ` Pavel Machek
2009-12-25 23:49 ` Daniel Walker
2009-12-26 8:51 ` Pavel Machek
2009-12-15 20:24 ` Ryan Mallon
2009-12-15 20:44 ` Pavel Machek
2009-12-15 6:48 ` Arve Hjønnevåg
2009-12-11 23:28 ` Russell King - ARM Linux
2009-12-11 23:50 ` H Hartley Sweeten
2009-12-14 6:24 ` Pavel Machek
2009-12-10 16:57 ` Pavel Machek
2009-12-08 22:45 ` Russell King - ARM Linux
2009-12-09 0:39 ` Arve Hjønnevåg
2009-12-09 11:37 ` Pavel Machek
2009-12-09 11:42 ` Arve Hjønnevåg
2009-12-10 16:27 ` Pavel Machek
2009-12-09 16:18 ` Daniel Walker
2009-12-13 21:29 ` Pavel Machek
2009-12-13 21:38 ` Brian Swetland
2009-12-15 19:09 ` Pavel Machek
2009-12-14 17:40 ` Daniel Walker
2009-12-15 19:10 ` Pavel Machek
2009-12-09 11:41 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091210162645.GG19454@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).