linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/14] omap: arch/arm/plat-omap/devices.c - sort alphabetically
Date: Fri, 11 Dec 2009 15:53:04 -0800	[thread overview]
Message-ID: <20091211235304.3189.31824.stgit@localhost> (raw)
In-Reply-To: <20091211234919.3189.95607.stgit@localhost>

From: Ladislav Michl <ladis@linux-mips.org>

Comment in omap_init_devices asks to keep init calls and their
implementations in alphabetical order, so let it be that way.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/devices.c |   68 +++++++++++++++++++++---------------------
 1 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index f866178..30b5db7 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -242,6 +242,39 @@ fail:
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -324,39 +357,6 @@ static void omap_init_wdt(void)
 static inline void omap_init_wdt(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP24XX
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name	   = "omap_rng",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -384,9 +384,9 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
+	omap_init_rng();
 	omap_init_uwire();
 	omap_init_wdt();
-	omap_init_rng();
 	return 0;
 }
 arch_initcall(omap_init_devices);

  parent reply	other threads:[~2009-12-11 23:53 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-11 23:52 [PATCH 00/14] Mostly fixes for 2.6.33 Tony Lindgren
2009-12-11 23:52 ` [PATCH 01/14] omap3: cm-t35: add mux initialization Tony Lindgren
2009-12-11 23:52 ` [PATCH 02/14] OMAP3: serial - allow platforms specify which UARTs to initialize Tony Lindgren
2009-12-11 23:52 ` [PATCH 03/14] omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND Tony Lindgren
2009-12-11 23:53 ` Tony Lindgren [this message]
2009-12-11 23:53 ` [PATCH 05/14] omap: header: remove unused data-type Tony Lindgren
2009-12-11 23:53 ` [PATCH 06/14] omap1: LCD_DMA: Use some define rather than a hexadecimal Tony Lindgren
2009-12-11 23:53 ` [PATCH 07/14] omap1: htcherald: Update defconfig to include mux support Tony Lindgren
2009-12-11 23:53 ` [PATCH 08/14] omap3: zoom2/3: make MMC slot work again Tony Lindgren
2009-12-11 23:54 ` [PATCH 09/14] omap3: rx51: Use wl1251 in SPI mode 3 Tony Lindgren
2009-12-11 23:54 ` [PATCH 10/14] omap3: id code detection 3525 vs 3515 Tony Lindgren
2009-12-11 23:54 ` [PATCH 11/14] omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards Tony Lindgren
2009-12-11 23:54 ` [PATCH 12/14] omap3: Zoom2/3: Update hsmmc board config params Tony Lindgren
2009-12-12  0:09 ` [PATCH 13/14] omap: serial: fix non-empty uart fifo read abort Tony Lindgren
2009-12-12  0:10 ` [PATCH 14/14] omap3: Fix OMAP35XX_REV macros Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091211235304.3189.31824.stgit@localhost \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).