From: andy@warmcat.com (Andy Green)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] s3c64xx-introduce-srom-registers.patch
Date: Tue, 29 Dec 2009 14:40:23 +0000 [thread overview]
Message-ID: <20091229144023.15524.41915.stgit@hit-nxdomain.opendns.com> (raw)
In-Reply-To: <20091229143756.15524.25160.stgit@hit-nxdomain.opendns.com>
This introduces a platform file for s3c64xx that defines
the SROM unit registers that control chip select
characteristics.
Signed-off-by: Andy Green <andy@warmcat.com>
---
arch/arm/mach-s3c6400/include/mach/map.h | 12 +++++
arch/arm/plat-s3c64xx/include/plat/regs-srom.h | 59 ++++++++++++++++++++++++
2 files changed, 71 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-srom.h
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index f3b48f8..b0fb5c5 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -17,6 +17,18 @@
#include <plat/map-base.h>
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
/* HSMMC units */
#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-srom.h b/arch/arm/plat-s3c64xx/include/plat/regs-srom.h
new file mode 100644
index 0000000..756731b
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT 0
+#define S3C64XX_SROM_BW__NCS1__SHIFT 4
+#define S3C64XX_SROM_BW__NCS2__SHIFT 8
+#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT 0
+#define S3C64XX_SROM_BCX__PMC__MASK 3
+#define S3C64XX_SROM_BCX__TACP__SHIFT 4
+#define S3C64XX_SROM_BCX__TACP__MASK 0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT 8
+#define S3C64XX_SROM_BCX__TCAH__MASK 0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT 12
+#define S3C64XX_SROM_BCX__TCOH__MASK 0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT 16
+#define S3C64XX_SROM_BCX__TACC__MASK 0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT 24
+#define S3C64XX_SROM_BCX__TCOS__MASK 0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT 28
+#define S3C64XX_SROM_BCX__TACS__MASK 0xf
+
+#endif /* _PLAT_REGS_SROM_H */
next prev parent reply other threads:[~2009-12-29 14:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-29 14:40 [PATCH 0/4] Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet Andy Green
2009-12-29 14:40 ` Andy Green [this message]
2009-12-29 14:40 ` [PATCH 2/4] s3c64xx-add-srom-physical-virtual-mapping.patch Andy Green
2009-12-29 14:40 ` [PATCH 3/4] smdk6410-add-chipselect-setup.patch Andy Green
2009-12-29 14:40 ` [PATCH 4/4] smdk6410-comment-ethernet-prerequisites.patch Andy Green
2010-01-04 2:55 ` [PATCH 0/4] Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091229144023.15524.41915.stgit@hit-nxdomain.opendns.com \
--to=andy@warmcat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).