* [PATCH 4/4] regulator: add max8925 support
2009-12-21 12:47 [PATCH 4/4] regulator: add max8925 support Haojian Zhuang
@ 2009-12-21 18:02 ` Liam Girdwood
2009-12-23 9:39 ` Haojian Zhuang
0 siblings, 1 reply; 9+ messages in thread
From: Liam Girdwood @ 2009-12-21 18:02 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2009-12-21 at 07:47 -0500, Haojian Zhuang wrote:
> >From a895458d62d28060abc60db25f6d3782edd6b7a1 Mon Sep 17 00:00:00 2001
> From: Haojian Zhuang <haojian.zhuang@marvell.com>
> Date: Fri, 18 Dec 2009 10:02:16 -0500
> Subject: [PATCH] regulator: add max8925 support
>
> MAX8925 contains 3 Buck and 20 LDO regulator.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Had a quick look, some minor issues below.
> ---
> drivers/regulator/Kconfig | 6 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/max8925.c | 346 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 353 insertions(+), 0 deletions(-)
> create mode 100644 drivers/regulator/max8925.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index bcbb161..72b334c 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -69,6 +69,12 @@ config REGULATOR_MAX1586
> regulator via I2C bus. The provided regulator is suitable
> for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
>
> +config REGULATOR_MAX8925
> + tristate "Maxim MAX8925 Power Management IC"
> + depends on MFD_MAX8925
> + help
> + Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
> +
> config REGULATOR_TWL4030
> bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
> depends on TWL4030_CORE
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 4257a86..2c20507 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) +=
> userspace-consumer.o
> obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
> obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
> obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
> +obj-$(CONFIG_REGULATOR_MAX8925) += max8925.o
> obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
> obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
> obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
> diff --git a/drivers/regulator/max8925.c b/drivers/regulator/max8925.c
> new file mode 100644
> index 0000000..dca0b17
> --- /dev/null
> +++ b/drivers/regulator/max8925.c
> @@ -0,0 +1,346 @@
> +/*
> + * Regulators driver for Maxim max8925
> + *
> + * Copyright (C) 2009 Marvell International Ltd.
> + * Haojian Zhuang <haojian.zhuang@marvell.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/mfd/max8925.h>
> +
> +#define SD1_DVM_VMIN (850000)
> +#define SD1_DVM_VMAX (1000000)
> +#define SD1_DVM_STEP (50000)
> +#define SD1_DVM_SHIFT (5) /* SDCTL1 bit5 */
> +#define SD1_DVM_EN (6) /* SDV1 bit 6 */
Don't need parenthesis here.
> +
> +struct max8925_regulator_info {
> + struct regulator_desc desc;
> + struct regulator_dev *regulator;
> + struct i2c_client *i2c;
> + struct max8925_chip *chip;
> +
> + int min_uV;
> + int max_uV;
> + int step_uV;
> + int vol_reg;
> + int vol_shift;
> + int vol_nbits;
> + int enable_bit;
> + int enable_reg;
> +};
> +
> +static inline int check_range(struct max8925_regulator_info *info,
> + int min_uV, int max_uV)
> +{
> + if (min_uV < info->min_uV || min_uV > info->max_uV)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int max8925_list_voltage(struct regulator_dev *rdev, unsigned index)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> + return (info->min_uV + index * info->step_uV);
extra () here too.
> +}
> +
> +static int max8925_set_voltage(struct regulator_dev *rdev,
> + int min_uV, int max_uV)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> + unsigned char data, mask;
> +
> + if (check_range(info, min_uV, max_uV)) {
> + dev_err(info->chip->dev, "invalid voltage range (%d, %d) uV\n",
> + min_uV, max_uV);
> + return -EINVAL;
> + }
> + data = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
> + data <<= info->vol_shift;
> + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
> +
> + return max8925_set_bits(info->i2c, info->vol_reg, mask, data);
> +}
> +
> +static int max8925_get_voltage(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> + unsigned char data, mask;
> + int ret;
> +
> + ret = max8925_reg_read(info->i2c, info->vol_reg);
> + if (ret < 0)
> + return ret;
> + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
> + data = (ret & mask) >> info->vol_shift;
> +
> + return max8925_list_voltage(rdev, data);
> +}
> +
> +static int max8925_enable(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + return max8925_set_bits(info->i2c, info->enable_reg,
> + 1 << info->enable_bit,
> + 1 << info->enable_bit);
> +}
> +
> +static int max8925_disable(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + return max8925_set_bits(info->i2c, info->enable_reg,
> + 1 << info->enable_bit, 0);
> +}
> +
> +static int max8925_is_enabled(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> + int ret;
> +
> + ret = max8925_reg_read(info->i2c, info->vol_reg);
> + if (ret < 0)
> + return ret;
> +
> + return (ret & (1 << info->enable_bit));
> +}
> +
> +static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> + unsigned char data, mask;
> +
> + if ((uV < SD1_DVM_VMIN) || (uV > SD1_DVM_VMAX))
> + return -EINVAL;
and extra () here
> +
> + data = (uV - SD1_DVM_VMIN + SD1_DVM_STEP - 1) / SD1_DVM_STEP;
> + data <<= SD1_DVM_SHIFT;
> + mask = 3 << SD1_DVM_SHIFT;
> +
> + return max8925_set_bits(info->i2c, info->enable_reg, mask, data);
> +}
> +
> +static int max8925_set_dvm_enable(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN,
> + 1 << SD1_DVM_EN);
> +}
> +
> +static int max8925_set_dvm_disable(struct regulator_dev *rdev)
> +{
> + struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN, 0);
> +}
> +
> +static struct regulator_ops max8925_regulator_sdv_ops = {
> + .set_voltage = max8925_set_voltage,
> + .get_voltage = max8925_get_voltage,
> + .enable = max8925_enable,
> + .disable = max8925_disable,
> + .is_enabled = max8925_is_enabled,
> + .set_suspend_voltage = max8925_set_dvm_voltage,
> + .set_suspend_enable = max8925_set_dvm_enable,
> + .set_suspend_disable = max8925_set_dvm_disable,
> +};
> +
> +static struct regulator_ops max8925_regulator_ldo_ops = {
> + .set_voltage = max8925_set_voltage,
> + .get_voltage = max8925_get_voltage,
> + .enable = max8925_enable,
> + .disable = max8925_disable,
> + .is_enabled = max8925_is_enabled,
> +};
> +
> +#define MAX8925_SDV(_id, min, max, step) \
> +{ \
> + .desc = { \
> + .name = "SDV" #_id, \
> + .ops = &max8925_regulator_sdv_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MAX8925_ID_SD##_id, \
> + .owner = THIS_MODULE, \
> + }, \
> + .min_uV = min * 1000, \
> + .max_uV = max * 1000, \
> + .step_uV = step * 1000, \
> + .vol_reg = MAX8925_SDV##_id, \
> + .vol_shift = (0), \
() not needed here and a few more below
> + .vol_nbits = (6), \
> + .enable_reg = MAX8925_SDCTL##_id, \
> + .enable_bit = (0), \
> +}
> +
> +#define MAX8925_LDO(_id, min, max, step) \
> +{ \
> + .desc = { \
> + .name = "LDO" #_id, \
> + .ops = &max8925_regulator_ldo_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MAX8925_ID_LDO##_id, \
> + .owner = THIS_MODULE, \
> + }, \
> + .min_uV = min * 1000, \
> + .max_uV = max * 1000, \
> + .step_uV = step * 1000, \
> + .vol_reg = MAX8925_LDOVOUT##_id, \
> + .vol_shift = (0), \
> + .vol_nbits = (6), \
> + .enable_reg = MAX8925_LDOCTL##_id, \
> + .enable_bit = (0), \
> +}
> +
> +static struct max8925_regulator_info max8925_regulator_info[] = {
> + MAX8925_SDV(1, 637.5, 1425, 12.5),
> + MAX8925_SDV(2, 650, 2225, 25),
> + MAX8925_SDV(3, 750, 3900, 50),
> +
> + MAX8925_LDO(1, 750, 3900, 50),
> + MAX8925_LDO(2, 650, 2250, 25),
> + MAX8925_LDO(3, 650, 2250, 25),
> + MAX8925_LDO(4, 750, 3900, 50),
> + MAX8925_LDO(5, 750, 3900, 50),
> + MAX8925_LDO(6, 750, 3900, 50),
> + MAX8925_LDO(7, 750, 3900, 50),
> + MAX8925_LDO(8, 750, 3900, 50),
> + MAX8925_LDO(9, 750, 3900, 50),
> + MAX8925_LDO(10, 750, 3900, 50),
> + MAX8925_LDO(11, 750, 3900, 50),
> + MAX8925_LDO(12, 750, 3900, 50),
> + MAX8925_LDO(13, 750, 3900, 50),
> + MAX8925_LDO(14, 750, 3900, 50),
> + MAX8925_LDO(15, 750, 3900, 50),
> + MAX8925_LDO(16, 750, 3900, 50),
> + MAX8925_LDO(17, 650, 2250, 25),
> + MAX8925_LDO(18, 650, 2250, 25),
> + MAX8925_LDO(19, 750, 3900, 50),
> + MAX8925_LDO(20, 750, 3900, 50),
> +};
> +
> +static inline struct max8925_regulator_info *find_regulator_info(int id)
> +{
> + struct max8925_regulator_info *ri;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(max8925_regulator_info); i++) {
> + ri = &max8925_regulator_info[i];
> + if (ri->desc.id == id)
> + return ri;
> + }
> + return NULL;
> +}
> +
> +static int __devinit max8925_regulator_probe(struct platform_device *pdev)
> +{
> + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
> + struct max8925_platform_data *pdata = chip->dev->platform_data;
> + struct max8925_regulator_info *ri = NULL;
> + struct regulator_dev *rdev;
> +
> + ri = find_regulator_info(pdev->id);
> + if (ri == NULL) {
> + dev_err(&pdev->dev, "invalid regulator ID specified\n");
> + return -EINVAL;
> + }
> + ri->i2c = chip->i2c;
> + ri->chip = chip;
> +
> + rdev = regulator_register(&ri->desc, &pdev->dev,
> + pdata->regulator[pdev->id], ri);
> + if (IS_ERR(rdev)) {
> + dev_err(&pdev->dev, "failed to register regulator %s\n",
> + ri->desc.name);
> + return PTR_ERR(rdev);
> + }
> +
> + platform_set_drvdata(pdev, rdev);
> + return 0;
> +}
> +
> +static int __devexit max8925_regulator_remove(struct platform_device *pdev)
> +{
> + struct regulator_dev *rdev = platform_get_drvdata(pdev);
> +
> + regulator_unregister(rdev);
> + return 0;
> +}
> +
> +#define MAX8925_REGULATOR_DRIVER(_name) \
> +{ \
> + .driver = { \
> + .name = "max8925-" #_name, \
> + .owner = THIS_MODULE, \
> + }, \
> + .probe = max8925_regulator_probe, \
> + .remove = __devexit_p(max8925_regulator_remove),\
> +}
> +
> +static struct platform_driver max8925_regulator_driver[] = {
> + MAX8925_REGULATOR_DRIVER(sd1),
> + MAX8925_REGULATOR_DRIVER(sd2),
> + MAX8925_REGULATOR_DRIVER(sd3),
> + MAX8925_REGULATOR_DRIVER(ldo1),
> + MAX8925_REGULATOR_DRIVER(ldo2),
> + MAX8925_REGULATOR_DRIVER(ldo3),
> + MAX8925_REGULATOR_DRIVER(ldo4),
> + MAX8925_REGULATOR_DRIVER(ldo5),
> + MAX8925_REGULATOR_DRIVER(ldo6),
> + MAX8925_REGULATOR_DRIVER(ldo7),
> + MAX8925_REGULATOR_DRIVER(ldo8),
> + MAX8925_REGULATOR_DRIVER(ldo9),
> + MAX8925_REGULATOR_DRIVER(ldo10),
> + MAX8925_REGULATOR_DRIVER(ldo11),
> + MAX8925_REGULATOR_DRIVER(ldo12),
> + MAX8925_REGULATOR_DRIVER(ldo13),
> + MAX8925_REGULATOR_DRIVER(ldo14),
> + MAX8925_REGULATOR_DRIVER(ldo15),
> + MAX8925_REGULATOR_DRIVER(ldo16),
> + MAX8925_REGULATOR_DRIVER(ldo17),
> + MAX8925_REGULATOR_DRIVER(ldo18),
> + MAX8925_REGULATOR_DRIVER(ldo19),
> + MAX8925_REGULATOR_DRIVER(ldo20),
> +};
> +
> +static int __init max8925_regulator_init(void)
> +{
> + int i, count, ret;
> +
> + count = ARRAY_SIZE(max8925_regulator_driver);
> + for (i = 0; i < count; i++) {
> + ret = platform_driver_register(&max8925_regulator_driver[i]);
> + if (ret != 0)
> + pr_err("Failed to register regulator driver: %d\n",
> + ret);
> + }
> + return 0;
> +}
> +module_init(max8925_regulator_init);
> +
> +static void __exit max8925_regulator_exit(void)
> +{
> + int i, count;
> +
> + count = ARRAY_SIZE(max8925_regulator_driver);
> + for (i = 0; i < count; i++)
> + platform_driver_unregister(&max8925_regulator_driver[i]);
> +}
> +module_exit(max8925_regulator_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
> +MODULE_DESCRIPTION("Regulator Driver for Maxim 8925 PMIC");
> +MODULE_ALIAS("platform:max8925-regulator");
> +
^ permalink raw reply [flat|nested] 9+ messages in thread