* [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip
@ 2010-01-05 13:41 Mark Brown
2010-01-05 13:41 ` [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module Mark Brown
0 siblings, 1 reply; 6+ messages in thread
From: Mark Brown @ 2010-01-05 13:41 UTC (permalink / raw)
To: linux-arm-kernel
This makes it a bit more obvious in genirq diagnostics that they
aren't handled by the i.MX interrupt controller.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-mx3/mx31ads.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a579f4c..c486c2f 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
}
static struct irq_chip expio_irq_chip = {
+ .name = "EXPIO(CPLD)",
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
--
1.6.5.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
2010-01-05 13:41 [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip Mark Brown
@ 2010-01-05 13:41 ` Mark Brown
2010-01-05 13:57 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Mark Brown @ 2010-01-05 13:41 UTC (permalink / raw)
To: linux-arm-kernel
The WM8350 core won't actually use the range yet, but it will in
future and the platform data to configure it is there now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-mx3/mx31ads.c | 1 +
arch/arm/plat-mxc/include/mach/irqs.h | 7 +++++++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index c486c2f..ed8498a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -452,6 +452,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..ae801e5 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,14 @@
* within sensible limits.
*/
#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#if defined(CONFIG_MACH_MX31ADS_WM1133_EV1) && !defined(MXC_BOARD_IRQS)
+#define MXC_BOARD_IRQS 80
+#endif
+
+#ifndef MXC_BOARD_IRQS
#define MXC_BOARD_IRQS 16
+#endif
#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
--
1.6.5.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
2010-01-05 13:41 ` [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module Mark Brown
@ 2010-01-05 13:57 ` Sascha Hauer
2010-01-05 15:20 ` Mark Brown
0 siblings, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2010-01-05 13:57 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 05, 2010 at 01:41:06PM +0000, Mark Brown wrote:
> The WM8350 core won't actually use the range yet, but it will in
> future and the platform data to configure it is there now.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> arch/arm/mach-mx3/mx31ads.c | 1 +
> arch/arm/plat-mxc/include/mach/irqs.h | 7 +++++++
> 2 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
> index c486c2f..ed8498a 100644
> --- a/arch/arm/mach-mx3/mx31ads.c
> +++ b/arch/arm/mach-mx3/mx31ads.c
> @@ -452,6 +452,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
>
> static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
> .init = mx31_wm8350_init,
> + .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
> };
> #endif
>
> diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
> index ead9d59..ae801e5 100644
> --- a/arch/arm/plat-mxc/include/mach/irqs.h
> +++ b/arch/arm/plat-mxc/include/mach/irqs.h
> @@ -37,7 +37,14 @@
> * within sensible limits.
> */
> #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
> +
> +#if defined(CONFIG_MACH_MX31ADS_WM1133_EV1) && !defined(MXC_BOARD_IRQS)
> +#define MXC_BOARD_IRQS 80
> +#endif
> +
> +#ifndef MXC_BOARD_IRQS
> #define MXC_BOARD_IRQS 16
> +#endif
I just had a look how other architectures handle this and I like it how
pxa does it:
/*
* The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. There will be 16 IRQs by default. If it is not enough,
* IRQ_BOARD_END is allowed be customized for each board, but keep
* the numbers within sensible limits and in descending order, so
* when multiple config options are selected, the maximum will be
* used.
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
#if defined(CONFIG_MACH_H4700)
#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
#elif defined(CONFIG_MACH_ZYLONITE)
#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
#elif defined(CONFIG_PXA_EZX)
#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
#endif
Can we do the same, so something like this?
/*
* The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. There will be 16 IRQs by default. If it is not enough,
* MXC_BOARD_IRQS is allowed be customized for each board, but keep
* the numbers within sensible limits and in descending order, so
* when multiple config options are selected, the maximum will be
* used.
*/
#if defined(CONFIG_MACH_MX31ADS_WM1133_EV1)
#define MXC_BOARD_IRQS 80
#else
#define MXC_BOARD_IRQS 16
#endif
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
2010-01-05 13:57 ` Sascha Hauer
@ 2010-01-05 15:20 ` Mark Brown
2010-01-05 15:47 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Mark Brown @ 2010-01-05 15:20 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 05, 2010 at 02:57:28PM +0100, Sascha Hauer wrote:
> I just had a look how other architectures handle this and I like it how
> pxa does it:
Yeah, my thinking here was to achieve the same thing with something more
like the existing i.MX code plus a bit more whitespace for legibility -
the end result is pretty much the same but a little less dense. You'd
wind up with an ordered stack of these ifdef blocks very much like those
that PXA has. I'm not that fussed either way, really, but I do like a
bit more whitespace.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
2010-01-05 15:20 ` Mark Brown
@ 2010-01-05 15:47 ` Sascha Hauer
0 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2010-01-05 15:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 05, 2010 at 03:20:14PM +0000, Mark Brown wrote:
> On Tue, Jan 05, 2010 at 02:57:28PM +0100, Sascha Hauer wrote:
>
> > I just had a look how other architectures handle this and I like it how
> > pxa does it:
>
> Yeah, my thinking here was to achieve the same thing with something more
> like the existing i.MX code plus a bit more whitespace for legibility -
> the end result is pretty much the same but a little less dense. You'd
> wind up with an ordered stack of these ifdef blocks very much like those
> that PXA has. I'm not that fussed either way, really, but I do like a
> bit more whitespace.
Feel free to add more whitespaces. What I like about pxa is that it
makes clear that MXC_BOARD_IRQS is defined exactly in this file (no
additional #ifndef MXC_BOARD_IRQS) and that it describes how people
should add additional irqs.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module
2010-01-05 16:05 [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip Mark Brown
@ 2010-01-05 16:05 ` Mark Brown
0 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2010-01-05 16:05 UTC (permalink / raw)
To: linux-arm-kernel
The WM8350 core won't actually use the range yet, but it will in
future and the platform data to configure it is there now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-mx3/mx31ads.c | 1 +
arch/arm/plat-mxc/include/mach/irqs.h | 5 +++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index c486c2f..ed8498a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -452,6 +452,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..0cb3476 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
* within sensible limits.
*/
#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS 80
+#else
#define MXC_BOARD_IRQS 16
+#endif
#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
--
1.6.5.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-05 16:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-05 13:41 [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip Mark Brown
2010-01-05 13:41 ` [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module Mark Brown
2010-01-05 13:57 ` Sascha Hauer
2010-01-05 15:20 ` Mark Brown
2010-01-05 15:47 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2010-01-05 16:05 [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip Mark Brown
2010-01-05 16:05 ` [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).