linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/18] OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c
Date: Tue, 19 Jan 2010 16:36:16 -0700	[thread overview]
Message-ID: <20100119233613.26047.28399.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100119232900.26047.98263.stgit@localhost.localdomain>

Move the osc_clk clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_osc.  This is intended to make the clock code
easier to understand, since all of the functions needed to manage the
osc_clk are now located in their own file, rather than being mixed
with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG
macro can now be defined for osc_clk clocks alone.  This
should reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split
into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use this
clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
---
 arch/arm/mach-omap2/Makefile       |    2 +
 arch/arm/mach-omap2/clkt2xxx_osc.c |   62 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/clock2xxx.c    |   34 +-------------------
 arch/arm/mach-omap2/clock2xxx.h    |    1 +
 4 files changed, 66 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/mach-omap2/clkt2xxx_osc.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 825c303..51178bf 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -13,7 +13,7 @@ clock-common				= clock.o clock_common_data.o \
 					  clkt_clksel.o
 clock-omap2xxx				= clkt2xxx_dpllcore.o \
 					  clkt2xxx_virt_prcm_set.o \
-					  clkt2xxx_apll.o
+					  clkt2xxx_apll.o clkt2xxx_osc.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
 			    $(clock-omap2xxx)
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
new file mode 100644
index 0000000..2167be8
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -0,0 +1,62 @@
+/*
+ * OMAP2xxx osc_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+	.enable		= omap2_enable_osc_ck,
+	.disable	= omap2_disable_osc_ck,
+};
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+	return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
+}
+
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 88077e7..62c3b02 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -79,31 +79,6 @@ const struct clkops clkops_omap2430_i2chs_wait = {
 	.find_companion = omap2_clk_dflt_find_companion,
 };
 
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-const struct clkops clkops_oscck = {
-	.enable		= omap2_enable_osc_ck,
-	.disable	= omap2_disable_osc_ck,
-};
-
 #ifdef OLD_CK
 /* Recalculate SYST_CLK */
 static void omap2_sys_clk_recalc(struct clk *clk)
@@ -116,7 +91,7 @@ static void omap2_sys_clk_recalc(struct clk *clk)
 }
 #endif	/* OLD_CK */
 
-static u32 omap2_get_sysclkdiv(void)
+u32 omap2xxx_get_sysclkdiv(void)
 {
 	u32 div;
 
@@ -127,14 +102,9 @@ static u32 omap2_get_sysclkdiv(void)
 	return div;
 }
 
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2xxx_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
 unsigned long omap2_sys_clk_recalc(struct clk *clk)
 {
-	return clk->parent->rate / omap2_get_sysclkdiv();
+	return clk->parent->rate / omap2xxx_get_sysclkdiv();
 }
 
 /*
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index 3f1672e..3b0610d 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -18,6 +18,7 @@ unsigned long omap2_dpllcore_recalc(struct clk *clk);
 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
 u32 omap2xxx_get_apll_clkin(void);
+u32 omap2xxx_get_sysclkdiv(void);
 
 /* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
 #ifdef CONFIG_ARCH_OMAP2420

  parent reply	other threads:[~2010-01-19 23:36 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-19 23:35 [PATCH v2 00/18] OMAP2/3/4 clock: split out code for clock types and clean up Paul Walmsley
2010-01-19 23:35 ` [PATCH v2 01/18] OMAP3 clock: move OMAP3-specific DPLL functions to dpll3xxx.c Paul Walmsley
2010-01-19 23:35 ` [PATCH v2 02/18] OMAP2/3/4 clock: move DPLL clock functions into mach-omap2/clkt_dpll.c Paul Walmsley
2010-01-19 23:35 ` [PATCH v2 03/18] OMAP2/3/4 clock: move clksel clock functions into mach-omap2/clkt_clksel.c Paul Walmsley
2010-01-19 23:35 ` [PATCH v2 04/18] OMAP2 clock: move all static functions to the top of the file Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 05/18] OMAP2/3/4 clock: combine all omap2_clk_functions Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 06/18] OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 07/18] OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 08/18] OMAP2xxx clock: move the APLL clock code into mach-omap2/clkt2xxx_apll.c Paul Walmsley
2010-01-19 23:36 ` Paul Walmsley [this message]
2010-01-19 23:36 ` [PATCH v2 10/18] OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 11/18] OMAP2 clock: don't compile OMAP2430-only functions on non-2430 builds Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 12/18] OMAP3 clock: split out DPLL3 M2 divider functions into mach-omap2/clkt3xxx_dpll3m2.c Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 13/18] OMAP2/3 clock: clean up omap*_clk_arch_init() Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 14/18] OMAP2/3 clock: remove unnecessary includes and clean up header Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 15/18] OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-only Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 16/18] OMAP3 DPLL: reorganize static functions Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 17/18] OMAP clock: resolve all remaining sparse warnings Paul Walmsley
2010-01-19 23:36 ` [PATCH v2 18/18] OMAP2/3/4 clock: rename and clean the omap2_clk_init() functions Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100119233613.26047.28399.stgit@localhost.localdomain \
    --to=paul@pwsan.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).