[PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot, v2

[tony@atomide.com (Tony Lindgren)]

* Russell King - ARM Linux <linux@arm.linux.org.uk> [100122 12:54]:
> On Fri, Jan 22, 2010 at 12:39:53PM -0800, Tony Lindgren wrote:
> > Here's this patch updated. It should now be actually more optimized for
> > non-multi-omap configurations as it uses the get_irqnr_preamble :)
> 
> And the patch looks a lot cleaner and easier to read.
> 
> > diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
> > index c7f1720..c5ea026 100644
> > --- a/arch/arm/mach-omap2/include/mach/entry-macro.S
> > +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
> > @@ -17,47 +17,85 @@
> >  
> >  #include <plat/omap24xx.h>
> >  #include <plat/omap34xx.h>
> > -
> > -/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
> > -#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
> > -#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
> > -#elif defined(CONFIG_ARCH_OMAP34XX)
> > -#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
> > -#endif
> > -#if defined(CONFIG_ARCH_OMAP4)
> >  #include <plat/omap44xx.h>
> > -#endif
> > -#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
> > -#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
> >  
> >  		.macro	disable_fiq
> >  		.endm
> >  
> > -		.macro  get_irqnr_preamble, base, tmp
> > -		.endm
> > -
> >  		.macro  arch_ret_to_user, tmp1, tmp2
> >  		.endm
> >  
> > -#ifndef CONFIG_ARCH_OMAP4
> > +#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) || \
> > +	defined(CONFIG_ARCH_OMAP34XX)
> 
> Isn't this equivalent to:
> 
> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
> 
> ?

Hmm, I guess it's not like that yet, but will be hopefully
soon.

Currently I believe we have CONFIG_ARCH_OMAP2 selected
for CONFIG_ARCH_OMAP3 too..

I have a set of patches that will remove the overlapping
Kconfig options. Basically I'm planning to convert:

CONFIG_ARCH_OMAP1	= arch/arm/mach-omap1
CONFIG_ARCH_OMAP2PLUS	= arch/arm/mach-omap2
CONFIG_ARCH_OMAP2	= defined(CONFIG_CPU_OMAP2420) || defined(CONFIG_CPU_OMAP2430)
CONFIG_ARCH_OMAP3	= defined(CONFIG_CPU_OMAP3430) || defined(CONFIG_CPU_OMAP3630)
CONFIG_ARCH_OMAP4	= stays the same

That will get rid of the double meaning for current
CONFIG_ARCH_OMAP2, and get rid of CONFIG_ARCH_OMAP24XX
and CONFIG_ARCH_OMAP34XX. Will post after I've updated
those patches again, hopefully during next week.

Regards,

Tony