From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale
Date: Wed, 3 Feb 2010 09:24:53 +0000 [thread overview]
Message-ID: <20100203092453.GA21921@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <f10f79e7313ecdeeb59ab881795baedf2430c636.1265173480.git.amit.kucheria@canonical.com>
On Tue, Feb 02, 2010 at 09:16:27PM -0800, Amit Kucheria wrote:
> +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
> +{
> + u32 reg;
> + void __iomem *pllbase;
> +
> + long mfi, pdf, mfn, mfd = 999999;
> + s64 temp64;
> + unsigned long quad_parent_rate;
> + unsigned long pll_hfsm, dp_ctl;
> + unsigned long parent_rate;
> +
> + parent_rate = clk_get_rate(clk->parent);
> +
> + pllbase = _get_pll_base(clk);
> +
> + quad_parent_rate = 4 * parent_rate;
> + pdf = mfi = -1;
> + while (++pdf < 16 && mfi < 5)
> + mfi = rate * (pdf+1) / quad_parent_rate;
> + if (mfi > 15)
> + return -1;
Why not "return -EPERM" since what you're actually saying here by
returning -1 is "Permission Denied"? If you didn't mean "Permission
Denied", then don't use return -1.
next prev parent reply other threads:[~2010-02-03 9:24 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1265173480.git.amit.kucheria@canonical.com>
2010-02-03 5:16 ` [PATCHv2 00/11] Base support for Freescale i.MX51 SoC platform Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 02/11] mxc timer: refactor timer code to use timer versions Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5 Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 06/11] mxc: enable support for Freescale i.MX5 series of processors Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 07/11] mxc: Add support for the Babbage board Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 08/11] fec: fix uninitialized rx buffer usage Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 09/11] fec: Add LAN8700 phy support Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 10/11] fec: Add ARCH_MX5 as a dependency Amit Kucheria
2010-02-03 5:16 ` [PATCHv2 11/11] mxc: Add imx51_defconfig Amit Kucheria
2010-02-05 6:48 ` Sascha Hauer
2010-02-03 16:46 ` [PATCHv2 08/11] fec: fix uninitialized rx buffer usage Grant Likely
2010-02-03 18:33 ` Amit Kucheria
2010-02-03 18:38 ` Grant Likely
2010-02-03 20:23 ` Grant Likely
2010-02-03 11:10 ` [PATCHv2 07/11] mxc: Add support for the Babbage board Sascha Hauer
2010-02-03 7:03 ` [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale Eric Miao
2010-02-03 14:20 ` Amit Kucheria
2010-02-03 9:24 ` Russell King - ARM Linux [this message]
2010-02-03 11:04 ` Sascha Hauer
2010-02-03 20:07 ` Amit Kucheria
2010-02-03 16:08 ` Rabin Vincent
2010-02-03 6:43 ` [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5 Eric Miao
2010-02-03 9:49 ` Sascha Hauer
2010-02-03 13:38 ` Amit Kucheria
2010-02-03 15:16 ` Eric Miao
2010-02-03 16:35 ` Grant Likely
2010-02-03 6:29 ` [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller Eric Miao
2010-02-03 9:40 ` Sascha Hauer
2010-02-03 16:27 ` Grant Likely
2010-02-04 0:25 ` Amit Kucheria
2010-02-03 16:23 ` [PATCHv2 02/11] mxc timer: refactor timer code to use timer versions Grant Likely
2010-02-03 6:23 ` [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family Eric Miao
2010-02-03 9:45 ` Sascha Hauer
2010-02-03 13:24 ` Amit Kucheria
2010-02-03 15:09 ` Eric Miao
2010-02-04 0:54 ` Eric Miao
2010-02-04 17:09 ` Nguyen Dinh-R00091
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100203092453.GA21921@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).