From mboxrd@z Thu Jan  1 00:00:00 1970
From: daniel@caiaq.de (Daniel Mack)
Date: Mon, 8 Feb 2010 11:15:24 +0100
Subject: [PXA320] How to find I/O registers, base address
	of ASIX ethernet chip?
In-Reply-To: <18311265621886@webmail106.yandex.ru>
References: <19621265275300@webmail108.yandex.ru>
	<20100205042655.GR28972@buzzloop.caiaq.de>
	<33291265356930@webmail116.yandex.ru>
	<20100207051343.GL9007@buzzloop.caiaq.de>
	<33061265619560@webmail103.yandex.ru>
	<20100208091348.GC15255@pengutronix.de>
	<18311265621886@webmail106.yandex.ru>
Message-ID: <20100208101524.GX28972@buzzloop.caiaq.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, Feb 08, 2010 at 12:38:06PM +0300, Dennis Semakin wrote:
> 08.02.10, 10:13, "Uwe Kleine-K?nig" <u.kleine-koenig@pengutronix.de>:
> >  This sounds like a missing clock.  Ah, and Daniel already asked that,
> >  too: "Did you switch on the clock for the static bus?"
> >  
> 
> Well... I yet do not know how to do this...

Try adding this sniplet to your lowlevel_init function in U-Boot:

        /* enable clocks for NAND and static memory */
        ldr             r0, =CKENA
        ldr             r1, [r0]
        orr             r1, r1, #(CKENA_4_NAND | CKENA_9_SMC)
        str             r1, [r0]
        ldr             r1, [r0]

Daniel