From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Wed, 10 Feb 2010 11:16:32 +0100 Subject: [PATCHv3 0/7] Initial Freescale i.MX51 SoC support In-Reply-To: References: Message-ID: <20100210101632.GM17643@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Amit, On Tue, Feb 09, 2010 at 06:59:48PM +0200, Amit Kucheria wrote: > (patchset rebased on top of Sascha's tree and trivial fixes made) > git://git.pengutronix.de/git/imx/linux-2.6.git mxc-master > > Will you consider merging it now? > > Regards, > Amit > > This series of patches adds basic support for i.MX5 family to the kernel. This > is just the bare minimum that brings up the board - sets up the clocks, IO > with a serial port and timers. > > Features: > > * Console: Serial console using pre-existing drivers/serial/imx.c > * Timer: Timer provided through arch/arm/plat-mxc/time.c > * Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c > * Clocks: Minimal Clock framework to allow board boot up > * Defconfigs: mx51_defconfig provided > > Tested on a i.MX51-based Babbage 2.5 board. > > Git: > > repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport ok, merged for -next. BTW the correct branch is mx51-baseport-sascha. This shouldn't happen with the proper use of git request-pull. Thanks for your work! Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |